Damage characterization and numerical simulation of shear experiment of plain woven glass-fiber reinforced composites based on 3D geometric reconstruction

[1]  F. Trochu,et al.  Reconstruction of mesostructural material twin models of engineering textiles based on Micro-CT Aided Geometric Modeling , 2019, Composites Part A: Applied Science and Manufacturing.

[2]  D. Fang,et al.  Effect of manufacturing defect on mechanical performance of plain weave carbon/epoxy composite based on 3D geometrical reconstruction , 2018, Composite Structures.

[3]  A. Zeinedini,et al.  Influence of drilling on mode II delamination of E-glass/epoxy laminated composites , 2018 .

[4]  D. Fang,et al.  A coupled elastic-plastic damage model for the mechanical behavior of three-dimensional (3D) braided composites , 2018 .

[5]  S. Guessasma,et al.  Exploring damage kinetics in short glass fibre reinforced thermoplastics , 2017 .

[6]  Stéphane Roux,et al.  Damage investigation and modeling of 3D woven ceramic matrix composites from X-ray tomography in-situ tensile tests , 2017 .

[7]  F. Touchard,et al.  Quantitative analysis by micro-CT of damage during tensile test in a woven hemp/epoxy composite after water ageing , 2017 .

[8]  P. Withers,et al.  X-ray computed tomography of polymer composites , 2017 .

[9]  Nagi N. Mansour,et al.  Stochastic characterisation methodology for 3-D textiles based on micro-tomography , 2017 .

[10]  P. Withers,et al.  Digital element simulation of aligned tows during compaction validated by computed tomography (CT) , 2017, International Journal of Solids and Structures.

[11]  Hao Wang,et al.  Quantification of effects of stochastic feature parameters of yarn on elastic properties of plain-weave composite – Part 2: Statistical predictions vs. mechanical experiments , 2016 .

[12]  Yong Zang,et al.  Progressive damage analysis and strength properties of fiber-bar composites reinforced by three-dimensional weaving under uniaxial tension , 2016 .

[13]  J. Buffière,et al.  In situ 3D characterization of high temperature fatigue damage mechanisms in a cast aluminum alloy using synchrotron X-ray tomography , 2016 .

[14]  Philip J. Withers,et al.  Evolution of damage during the fatigue of 3D woven glass-fibre reinforced composites subjected to tension-tension loading observed by time-lapse X-ray tomography , 2016 .

[15]  Hao Wang,et al.  Statistical Analysis of Yarn Feature Parameters in C/Epoxy Plain-Weave Composite Using Micro CT with High-Resolution Lens-Coupled Detector , 2016, Applied Composite Materials.

[16]  Hao Wang,et al.  Quantification of effects of stochastic feature parameters of yarn on elastic properties of plain-weave composite. Part 1: Theoretical modeling , 2015 .

[17]  Li Ma,et al.  Modal response of all-composite corrugated sandwich cylindrical shells , 2015 .

[18]  Hao Wang,et al.  A variable metric stochastic theory of textile composites with random geometric parameters of yarn cross-section , 2015 .

[19]  R. Protz,et al.  A quantitative comparison of the capabilities of in situ computed tomography and conventional computed tomography for damage analysis of composites , 2015 .

[20]  Fang Daining,et al.  Effect of manufacturing defects on mechanical properties and failure features of 3D orthogonal woven C/C composites , 2015 .

[21]  Emmanuelle Vidal-Salle,et al.  Meso-scale FE analyses of textile composite reinforcement deformation based on X-ray computed tomography , 2014 .

[22]  F. Daining,et al.  Finite Element Modeling of 3D Orthogonal Woven C/C Composite Based on Micro-Computed Tomography Experiment , 2014, Applied Composite Materials.

[23]  Kay André Weidenmann,et al.  Measurement of Sub-Surface Core Damage in Sandwich Structures Using In-situ Hertzian Indentation During X-ray Computed Tomography , 2014 .

[24]  Andrew Drach,et al.  Processing of fiber architecture data for finite element modeling of 3D woven composites , 2014, Adv. Eng. Softw..

[25]  E. Lauridsen,et al.  3D in situ observations of glass fibre/matrix interfacial debonding , 2013 .

[26]  Xianghui Xiao,et al.  Understanding fatigue crack growth in aluminum alloys by in situ X-ray synchrotron tomography , 2013 .

[27]  Zi-Xing Lu,et al.  Investigation on the tensile properties of three-dimensional full five-directional braided composites , 2013 .

[28]  R. K. Mittal,et al.  Elastic modulus of 3D carbon/carbon composite using image-based finite element simulations and experiments , 2013 .

[29]  Brian N. Cox,et al.  Generating virtual textile composite specimens using statistical data from micro-computed tomography: 3D tow representations , 2012 .

[30]  Brian N. Cox,et al.  Generating virtual textile composite specimens using statistical data from micro-computed tomography: 1D tow representations for the binary model , 2012 .

[31]  Louise P. Brown,et al.  Modelling and Simulating Textile Structures Using TexGen , 2011 .

[32]  A. J. Moffat,et al.  High resolution tomographic imaging and modelling of notch tip damage in a laminated composite , 2010 .

[33]  B. Gangadhara Prusty,et al.  Contrast enhancement in visualisation of woven composite architecture using a MicroCT Scanner. Part 2: Tow and preform coatings , 2009 .

[34]  M. Kosek,et al.  Visualization of voids in actual C/C woven composite structure , 2009 .

[35]  Liang Jun,et al.  Progressive damage and nonlinear analysis of 3D four-directional braided composites under unidirectional tension , 2009 .

[36]  B. Gangadhara Prusty,et al.  Contrast enhancement in visualisation of woven composite tow architecture using a MicroCT Scanner. Part 1: Fabric coating and resin additives , 2009 .

[37]  N. Tolosana,et al.  3D mesomechanical analysis of three-axial braided composite materials , 2006 .

[38]  Ignace Verpoest,et al.  Virtual textile composites software WiseTex: Integration with micro-mechanical, permeability and structural analysis , 2005 .

[39]  A. Sinoimeri,et al.  Mechanical Behavior of the Plain Weave Structure Using Energy Methods: Fabric Uniaxial Extension , 1997 .

[40]  C. Chamis.  Mechanics of Composite Materials: Past, Present and Future , 1989 .

[41]  Thierry Pun,et al.  A new method for grey-level picture thresholding using the entropy of the histogram , 1980 .

[42]  R. Postle,et al.  A General Energy Analysis of Fabric Mechanics Using Optimal Control Theory , 1978 .

[43]  Stepan Vladimirovitch Lomov,et al.  Stochastic framework for quantifying the geometrical variability of laminated textile composites using micro-computed tomography , 2013 .

[44]  Brian N. Cox,et al.  Characterizing Three‐Dimensional Textile Ceramic Composites Using Synchrotron X‐Ray Micro‐Computed‐Tomography , 2012 .

[45]  M. Sherburn,et al.  Geometric and mechanical modelling of textiles , 2007 .