Graphene-protected copper and silver plasmonics

Plasmonics has established itself as a branch of physics which promises to revolutionize data processing, improve photovoltaics, and increase sensitivity of bio-detection. A widespread use of plasmonic devices is notably hindered by high losses and the absence of stable and inexpensive metal films suitable for plasmonic applications. To this end, there has been a continuous search for alternative plasmonic materials that are also compatible with complementary metal oxide semiconductor technology. Here we show that copper and silver protected by graphene are viable candidates. Copper films covered with one to a few graphene layers show excellent plasmonic characteristics. They can be used to fabricate plasmonic devices and survive for at least a year, even in wet and corroding conditions. As a proof of concept, we use the graphene-protected copper to demonstrate dielectric loaded plasmonic waveguides and test sensitivity of surface plasmon resonances. Our results are likely to initiate wide use of graphene-protected plasmonics.

[1]  William Regan,et al.  Graphene as a long-term metal oxidation barrier: worse than nothing. , 2013, ACS nano.

[2]  V. Shalaev,et al.  Alternative Plasmonic Materials: Beyond Gold and Silver , 2013, Advanced materials.

[3]  A. M. van der Zande,et al.  Impermeable atomic membranes from graphene sheets. , 2008, Nano letters.

[4]  A. Maradudin,et al.  Nano-optics of surface plasmon polaritons , 2005 .

[5]  M. Futamata.  Application of attenuated total reflection surface-plasmon-polariton Raman spectroscopy to gold and copper. , 1997, Applied optics.

[6]  A. Ganguli,et al.  Enhanced functionalization of Mn2O3@SiO2 core-shell nanostructures , 2011, Nanoscale research letters.

[7]  T. Ebbesen,et al.  Channel plasmon subwavelength waveguide components including interferometers and ring resonators , 2006, Nature.

[8]  S. Maier.  Plasmonics: Fundamentals and Applications , 2007 .

[9]  Jiali Zhang,et al.  Biocompatibility of Graphene Oxide , 2010, Nanoscale research letters.

[10]  H. Atwater,et al.  Plasmonics for improved photovoltaic devices. , 2010, Nature materials.

[11]  Sergey I. Bozhevolnyi,et al.  Theoretical analysis of dielectric-loaded surface plasmon-polariton waveguides , 2007 .

[12]  Sergiy Patskovsky,et al.  Phase and amplitude sensitivities in surface plasmon resonance bio and chemical sensing. , 2009, Optics express.

[13]  M. Soljavci'c,et al.  Plasmonics in graphene at infrared frequencies , 2009, 0910.2549.

[14]  Yuval Golan,et al.  Vacuum-deposited gold films: I. Factors affecting the film morphology , 1992 .

[15]  J. Seiber.  Status and Prospects , 2005 .

[16]  R. Piner,et al.  Transfer of large-area graphene films for high-performance transparent conductive electrodes. , 2009, Nano letters.

[17]  Günter Gauglitz,et al.  Surface plasmon resonance sensors: review , 1999 .

[18]  K. Novoselov,et al.  Strong plasmonic enhancement of photovoltage in graphene. , 2011, Nature communications.

[19]  C. Kocabas,et al.  Plasmon-polaritons on graphene-metal surface and their use in biosensors , 2012 .

[20]  F. Koppens,et al.  Graphene plasmonics: a platform for strong light-matter interactions. , 2011, Nano letters.

[21]  S. Banerjee,et al.  Large-Area Synthesis of High-Quality and Uniform Graphene Films on Copper Foils , 2009, Science.

[22]  SUPARNA DUTTASINHA,et al.  Graphene: Status and Prospects , 2009, Science.

[23]  J. Nunemacher,et al.  Optimal management of giant cell arteritis and polymyalgia rheumatica , 2012, Therapeutics and clinical risk management.

[24]  T. W. Halstead,et al.  Status and Prospects , 1984 .

[25]  V. Kravets,et al.  Singular phase nano-optics in plasmonic metamaterials for label-free single-molecule detection. , 2013, Nature materials.

[26]  A. N. Grigorenko,et al.  Graphene plasmonics , 2012, Nature Photonics.

[27]  H. Ehrenreich,et al.  Optical Properties of Ag and Cu , 1962 .

[28]  John B. Shoven,et al.  I , Edinburgh Medical and Surgical Journal.

[29]  Vladimir M. Shalaev,et al.  Searching for better plasmonic materials , 2009, 0911.2737.

[30]  P. F. Robusto,et al.  Optical measurements of the surface plasmon of copper , 1981 .

[31]  B. Liedberg,et al.  Biosensing with surface plasmon resonance--how it all started. , 1995, Biosensors & bioelectronics.

[32]  Francisco M Gama,et al.  Biocompatibility of poly(lactic acid) with incorporated graphene-based materials. , 2013, Colloids and surfaces. B, Biointerfaces.

[33]  Y. Shintani,et al.  In Situ Studies on Oxidation of Copper Films By Using ATR Technique , 1985 .

[34]  W. Barnes,et al.  Surface plasmon subwavelength optics , 2003, Nature.

[35]  V. Kravets,et al.  Extremely narrow plasmon resonances based on diffraction coupling of localized plasmons in arrays of metallic nanoparticles. , 2008, Physical review letters.

[36]  A. Reina,et al.  Large area, few-layer graphene films on arbitrary substrates by chemical vapor deposition. , 2009, Nano letters.

[37]  Derrek E. Lobo,et al.  Protecting copper from electrochemical degradation by graphene coating , 2012 .

[38]  T Turbadar,et al.  Complete Absorption of Light by Thin Metal Films , 1959 .

[39]  K. Bolotin,et al.  Graphene: corrosion-inhibiting coating. , 2012, ACS nano.

[40]  M. Kafesaki,et al.  A comparison of graphene, superconductors and metals as conductors for metamaterials and plasmonics , 2012, 1210.0640.