Theoretical prediction of longitudinal heat conduction effect in cross-corrugated heat exchanger

Abstract In the elementary heat exchanger design theory, the longitudinal heat conduction through the heat transfer plate separating hot and cold fluid streams is neglected, and only the transverse heat conduction is taken into account for the conjugate heat transfer problem. In the cross-corrugated heat exchanger, the corrugated primary surface naturally leads to the highly non-uniform convective heat transfer coefficient distribution on opposite sides of the plate. In such a case, the longitudinal heat conduction may play a significant role in the thermal coupling between high heat transfer regions located on opposite sides of the plate. In the present study CFD is used to perform a quantitative assessment of the thermal performance of a cross-corrugated heat exchanger including the longitudinal heat conduction effect for various design options such as different plate thickness and corrugation geometry for a typical operating condition. The longitudinal heat conduction effect is then predicted by the theoretical method using the ‘ network-of-resistance ’ in the wide range of the heat exchanger design space.

[1]  T. Tomimura,et al.  DESIGN AND HEAT TRANSFER CHARACTERISTICS OF NEW PLATE HEAT EXCHANGER. , 1972 .

[2]  Bengt Sundén,et al.  Evaluation of the Cross Corrugated and Some Other Candidate Heat Transfer Surfaces for Microturbine Recuperators , 2002 .

[3]  P. Lettieri,et al.  An introduction to heat transfer , 2007 .

[4]  William M. Worek,et al.  THE EFFECT OF LONGITUDINAL HEAT CONDUCTION IN CROSS FLOW INDIRECT EVAPORATIVE AIR COOLERS , 2007 .

[5]  Bengt Sundén,et al.  A numerical investigation of primary surface rounded cross wavy ducts , 2002 .

[6]  J. Stasiek,et al.  Experimental studies of heat transfer and fluid flow across corrugated-undulated heat exchanger surfaces , 1998 .

[7]  M. Collins,et al.  Investigation of flow and heat transfer in corrugated passages—II. Numerical simulations , 1996 .

[8]  N. K. Mitra,et al.  Numerical Investigation of Convective Heat Transfer and Pressure Drop in Wavy Ducts , 2000 .

[9]  W. Focke,et al.  The effect of the corrugation inclination angle on the thermohydraulic performance of plate heat exchangers , 1985 .

[10]  Kankanhalli N. Seetharamu,et al.  The combined effects of wall longitudinal heat conduction, inlet fluid flow nonuniformity and temperature nonuniformity in compact tube–fin heat exchangers: a finite element method , 1999 .

[11]  M. Collins,et al.  Investigation of flow and heat transfer in corrugated passages—I. Experimental results , 1996 .

[12]  S. Paras,et al.  Optimal design of a plate heat exchanger with undulated surfaces , 2009 .

[13]  Gadhiraju Venkatarathnam,et al.  Performance of a counter flow heat exchanger with longitudinal heat conduction through the wall separating the fluid streams from the environment , 1999 .

[14]  M. Ciofalo.  Local effects of longitudinal heat conduction in plate heat exchangers , 2007 .

[15]  M. D. Atrey,et al.  Performance evaluation of counter flow heat exchangers considering the effect of heat in leak and longitudinal conduction for low-temperature applications , 2000 .

[16]  K. N. Seetharamu,et al.  The effects of longitudinal heat conduction in compact plate-fin and tube-fin heat exchangers using a finite element method , 1997 .

[17]  T. Skiepko.  The effect of matrix longitudinal heat conduction on the temperature fields in the rotary heat exchanger , 1988 .

[18]  Gadhiraju Venkatarathnam,et al.  Performance degradation due to longitudinal heat conduction in very high NTU counterflow heat exchangers , 1998 .

[19]  Martin R. Wolf,et al.  K3 User Guide , 2000 .