Numerical microstructural optimization for the hydrogen electrode of solid oxide cells

A multiscale model has been used to optimize the microstructure of a classical hydrogen electrode made of nickel and yttria‐stabilized zirconia (Ni‐8YSZ). For this purpose, a 3D reconstruction of a reference electrode has been obtained by X‐ray nano‐holotomography. Then, a large dataset of synthetic microstructures has been generated around this reference with the truncated Gaussian random field method, varying the ratio Ni/8YSZ and the Ni particle size. All the synthetic microstructures have been introduced in a multiscale modeling approach to analyze the impact of the microstructure on the electrode and cell responses. The local electrode polarization resistance in the hydrogen electrode, as well as the complete cell impedance spectra, have been computed for the different microstructures. A significant performance improvement was found when decreasing the Ni particle size distribution. Moreover, an optimum has been identified in terms of electrode composition allowing the minimization of the cell polarization resistance. The same methodology has been also applied to assess the relevance of graded electrodes. All these results allow a better understanding of the precise role of microstructure on cell performances and provide useful guidance for cell manufacturing.

[1]  B. Morel,et al.  A multiscale model validated on local current measurements for understanding the solid oxide cells performances , 2023, Journal of Power Sources.

[2]  O. Genç,et al.  Synthetical designing of solid oxide fuel cell electrodes: Effect of particle size and volume fraction , 2022, International Journal of Hydrogen Energy.

[3]  E. Djurado,et al.  Electrode kinetics of porous Ni-3YSZ cermet operated in fuel cell and electrolysis modes for solid oxide cell application , 2021 .

[4]  P. Cloetens,et al.  Particle-based model for functional and diffusion layers of solid oxide cells electrodes , 2020, Powder Technology.

[5]  P. Cloetens,et al.  Degradation of Ni-YSZ Electrodes in Solid Oxide Cells: Impact of Polarization and Initial Microstructure on the Ni Evolution , 2019, Journal of The Electrochemical Society.

[6]  N. Shikazono,et al.  Modeling of solid oxide fuel cell (SOFC) electrodes from fabrication to operation: Microstructure optimization via artificial neural networks and multi-objective genetic algorithms , 2019, Energy Conversion and Management.

[7]  S. Campanari,et al.  Development of a Multiscale SOFC Model and Application to Axially‐Graded Electrode Design , 2019, Fuel Cells.

[8]  R. Sharma,et al.  Microstructural correlations for specific surface area and triple phase boundary length for composite electrodes of solid oxide cells , 2019, Journal of Power Sources.

[9]  P. Cloetens,et al.  Impact of Nickel agglomeration on Solid Oxide Cell operated in fuel cell and electrolysis modes , 2018, Journal of Power Sources.

[10]  Julio Cesar da Silva,et al.  Efficient correction of wavefront inhomogeneities in X-ray holographic nanotomography by random sample displacement , 2018 .

[11]  P. Cloetens,et al.  Stochastic geometrical modeling of solid oxide cells electrodes validated on 3D reconstructions , 2018 .

[12]  E. MacA. Gray,et al.  Optimization and integration of hybrid renewable energy hydrogen fuel cell energy systems – A critical review , 2017 .

[13]  P. Bleuet,et al.  Role of microstructure on electrode operating mechanisms for mixed ionic electronic conductors: From synchrotron-based 3D reconstruction to electrochemical modeling , 2016 .

[14]  M. Mogensen,et al.  Ni/YSZ electrodes structures optimized for increased electrolysis performance and durability , 2016 .

[15]  Dominique Jeulin,et al.  Morphological modeling of three-phase microstructures of anode layers using SEM images , 2017 .

[16]  Ze Liu,et al.  Graded porous solid oxide fuel cells fabricated by multilayer tape casting and co-firing progress , 2015 .

[17]  B. Münch,et al.  3D Microstructure Effects in Ni-YSZ Anodes: Influence of TPB Lengths on the Electrochemical Performance , 2015, Materials.

[18]  S. Jensen,et al.  Eliminating degradation in solid oxide electrochemical cells by reversible operation. , 2015, Nature Materials.

[19]  Nigel P. Brandon,et al.  Optimal control strategies for hydrogen production when coupling solid oxide electrolysers with intermittent renewable energies , 2014 .

[20]  S. Senthil Kumar,et al.  Properties and development of Ni/YSZ as an anode material in solid oxide fuel cell: A review , 2014 .

[21]  Francois L. E. Usseglio-Viretta,et al.  Quantitative microstructure characterization of a Ni–YSZ bi-layer coupled with simulated electrode polarisation , 2014 .

[22]  Yixiang Shi,et al.  Fundamentals of electro- and thermochemistry in the anode of solid-oxide fuel cells with hydrocarbon and syngas fuels , 2014 .

[23]  A. Brisse,et al.  A Review and Comprehensive Analysis of Degradation Mechanisms of Solid Oxide Electrolysis Cells , 2013 .

[24]  Francois L. E. Usseglio-Viretta,et al.  3D phase mapping of solid oxide fuel cell YSZ/Ni cermet at the nanoscale by holographic X-ray nanotomography , 2013 .

[25]  A. Bertei,et al.  Microstructural modeling for prediction of transport properties and electrochemical performance in SOFC composite electrodes , 2013 .

[26]  J. Laurencin,et al.  Micro modelling of solid oxide electrolysis cell: From performance to durability , 2013 .

[27]  S. Mukhopadhyay,et al.  Compositional control of continuously graded anode functional layer , 2012 .

[28]  Olivera Kesler,et al.  The influence of pore formers on the microstructure of plasma-sprayed NiO–YSZ anodes , 2012 .

[29]  S. Barnett,et al.  Linking the microstructure, performance and durability of Ni-yttria-stabilized zirconia solid oxide fuel cell anodes using three-dimensional focused ion beam–scanning electron microscopy imaging , 2011 .

[30]  Q. Cai,et al.  Modelling the 3D microstructure and performance of solid oxide fuel cell electrodes: Computational parameters , 2011 .

[31]  S. Itoh,et al.  A modeling study of porous composite microstructures for solid oxide fuel cell anodes , 2011 .

[32]  Boris Iwanschitz,et al.  Microstructure degradation of cermet anodes for solid oxide fuel cells: Quantification of nickel grain growth in dry and in humid atmospheres , 2011 .

[33]  Shenmin Zhang,et al.  A stochastic geometry based model for total triple phase boundary length in composite cathodes for solid oxide fuel cells , 2009 .

[34]  Andrew M. Colclasure,et al.  Modeling Electrochemical Oxidation of Hydrogen on Ni–YSZ Pattern Anodes , 2009 .

[35]  Robert J. Kee,et al.  Percolation theory to predict effective properties of solid oxide fuel-cell composite electrodes , 2009 .

[36]  Hans Peter Buchkremer,et al.  Element interdiffusion at electrolyte–cathode interfaces in ceramic high-temperature fuel cells , 2009 .

[37]  Boris Iwanschitz,et al.  Fundamental mechanisms limiting solid oxide fuel cell durability , 2008 .

[38]  Dennis Y.C. Leung,et al.  Micro-scale modelling of solid oxide fuel cells with micro-structurally graded electrodes , 2007 .

[39]  Naiqing Zhang,et al.  Ni–YSZ gradient anodes for anode-supported SOFCs , 2007 .

[40]  Yann Bultel,et al.  Percolation effects in functionally graded SOFC electrodes , 2007 .

[41]  L. Gauckler,et al.  The Electrochemistry of Ni Pattern Anodes Used as Solid Oxide Fuel Cell Model Electrodes , 2001 .