Experimental analysis of thermal performance in buildings with shape-stabilized phase change materials

Abstract Maintaining constant thermal conditions in building interiors requires substantial energy. Using phase-change materials (PCMs) with construction materials can improve thermal performance without increasing energy expenditure. Herein, shape-stabilized PCMs (SSPCMs) were used. We measured the thermal performance of a PCM sheet and established the melting- and solidification-temperature ranges at 19–26 °C. Three identical huts were examined using varying PCM levels under natural and heating conditions. In Hut A, no SSPCM sheets were applied; in Hut B, four layers of SSPCM sheets were applied to the floor; in Hut C, one layer of SSPCM was applied to the floor, walls, and ceilings. The results demonstrated that the application of SSPCM sheets improves thermal performance. For an equal number of SSPCM sheet layers applied on each side, the floor directly exposed to solar radiation showed the highest indoor temperature stabilization effect, followed by the walls and ceilings. Compared with Hut A, which served as the reference, the total power consumption using a heater decreased by 9.2% and 18.4% in Huts B and C, respectively. The effect of reducing heating power doubled when the applied area was expanded from the floor to the entire surface. Hence, effective PCM usage can entail large-scale application of SSPCM sheets to building surfaces.

[1]  Yuan Hu,et al.  Effect of expanded graphite on properties of high-density polyethylene/paraffin composite with intumescent flame retardant as a shape-stabilized phase change material , 2010 .

[2]  Eleni Ampatzi,et al.  Latent heat storage in building elements: A systematic review on properties and contextual performance factors , 2016 .

[3]  André Bontemps,et al.  Thermal testing and numerical simulation of a prototype cell using light wallboards coupling vacuum isolation panels and phase change material , 2006 .

[4]  D. Feldman,et al.  Energy-Storing Wallboard: Flammability Tests , 1998 .

[5]  David J. Sailor,et al.  Evaluation of phase change materials for improving thermal comfort in a super-insulated residential building , 2014 .

[6]  H. Brouwers,et al.  Experimental research on the use of micro-encapsulated Phase Change Materials to store solar energy in concrete floors and to save energy in Dutch houses , 2011 .

[7]  Luisa F. Cabeza,et al.  Experimental study of using PCM in brick constructive solutions for passive cooling , 2010 .

[8]  Andreas K. Athienitis,et al.  Investigation of the Thermal Performance of a Passive Solar Test-Room with Wall Latent Heat Storage , 1997 .

[9]  Yi Jiang,et al.  Preparation, thermal performance and application of shape-stabilized PCM in energy efficient buildings , 2006 .

[10]  A. Abhat.  Low temperature latent heat thermal energy storage: Heat storage materials , 1983 .

[11]  Gustavo Barea,et al.  The multi-azimuthal window as a passive solar system: A study of heat gain for the rational use of energy , 2017 .

[12]  Farah Souayfane,et al.  Phase change materials (PCM) for cooling applications in buildings: A review , 2016 .

[13]  Dan Zhou,et al.  Review on thermal energy storage with phase change materials (PCMs) in building applications , 2012 .

[14]  Brent R. Young,et al.  Application of PCM Energy Storage in Combination with Night Ventilation for Space Cooling , 2015, Thermal Energy Storage with Phase Change Materials.

[15]  Na Zhu,et al.  Energy performance and optimal control of air-conditioned buildings with envelopes enhanced by phase change materials , 2011 .

[16]  Min Xiao,et al.  Preparation and performance of shape stabilized phase change thermal storage materials with high thermal conductivity , 2002 .

[17]  Xu Xu,et al.  Modeling and simulation of under-floor electric heating system with shape-stabilized PCM plates , 2004 .

[18]  John L. Wilson,et al.  Investigation of PCM as retrofitting option to enhance occupant thermal comfort in a modern residential building , 2016 .

[19]  Fernando Olsina,et al.  Comfort reliability evaluation of building designs by stochastic hygrothermal simulation , 2014 .

[20]  Luisa F. Cabeza,et al.  Thermal behaviour of insulation and phase change materials in buildings with internal heat loads: experimental study , 2015 .

[21]  Sughwan Kim,et al.  Thermal characteristics of mortar containing hexadecane/xGnP SSPCM and energy storage behaviors of envelopes integrated with enhanced heat storage composites for energy efficient buildings , 2014 .

[22]  Paulo Santos,et al.  Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency , 2013 .

[23]  Xu Xu,et al.  Modeling and simulation on the thermal performance of shape-stabilized phase change material floor used in passive solar buildings , 2005 .

[24]  Adriaan S. Luyt,et al.  Polypropylene as a potential matrix for the creation of shape stabilized phase change materials , 2007 .

[25]  Fitsum Tariku,et al.  Phase change material's (PCM) impacts on the energy performance and thermal comfort of buildings in a mild climate , 2016 .

[26]  Kunping Lin,et al.  Thermal analysis of a direct-gain room with shape-stabilized PCM plates , 2008 .