A novel physical model for partial discharge in narrow channels

In order to reveal the mechanism of partial discharge (PD) in electrical trees, an artificial single channel is studied as model for tree channels. In a long-narrow channel, the behaviour of PD is similar to that in an actual tree. When the length of the channel is decreased, the /spl phi/-q-n pattern of PD in the channel changes from wing to turtle or rabbit like, and the range of light emission in the channel increases when the applied voltage is increased. Considering the influence of a PD on the total field distribution and thus on a later PD, a physical model is put forward to describe the PD behaviour. It is assumed that PD is induced by the high field at the needle tip, then propagates along the channel, and stops propagating when the field in the channel becomes lower than a critical value due to field divergence. Mathematical analysis on an ideal needle-plane electrode system clearly explains the physical meaning of the model. And the computer simulation by using the superposition method agrees with the experimental results very well. This model is also valid to describe the behaviour of PD in electrical trees.

[1]  L. Niemeyer,et al.  Measurement and simulation of PD in epoxy voids , 1995 .

[2]  L. A. Dissado,et al.  Propagation of electrical tree structures in solid polymeric insulation , 1997 .

[3]  L. A. Dissado,et al.  Physical origin for differences in electrical tree structures , 1994, Proceedings of IEEE Conference on Electrical Insulation and Dielectric Phenomena - (CEIDP'94).

[4]  H. R. Zeller,et al.  A fractal model of dielectric breakdown and prebreakdown in solid dielectrics , 1986 .

[5]  G. Stevens,et al.  Stochastic modelling of electrical treeing: fractal and statistical characteristics , 1990 .

[6]  Masayuki Hikita,et al.  Measurements of partial discharges by computer and analysis of partial discharge distribution by the Monte Carlo method , 1990 .

[7]  R. Densley,et al.  An Investigation into the Growth of Electrical Trees in XLPE Cable Insulation , 1979, IEEE Transactions on Electrical Insulation.

[8]  Suwarno,et al.  A model for electrical treeing discharges in polyethylene , 1995, Proceedings of 1995 International Symposium on Electrical Insulating Materials.

[9]  J. V. Champion,et al.  The effect of voltage and material age on the electrical tree growth and breakdown characteristics of epoxy resins , 1995 .

[10]  A. Borishade,et al.  The Development of Electrical Discharges in Simulated "Tree" Channels , 1977, IEEE Transactions on Electrical Insulation.

[11]  C. Mauoux,et al.  Contribution of partial discharges to electrical breakdown of solid insulating materials , 1995 .

[12]  Kai Wu,et al.  A new fractal model for describing time-dependence of treeing growth , 1995, Proceedings of 1995 International Symposium on Electrical Insulating Materials.

[13]  Suwarno,et al.  Partial discharges due to electrical treeing in polymers: phase-resolved and time-sequence observation and analysis , 1996 .

[14]  L. Pietronero,et al.  Fractal Dimension of Dielectric Breakdown , 1984 .

[15]  Characteristics of discharges inside simulated tree channels under impulse voltage , 1986 .

[16]  Sweeney,et al.  Physical model for breakdown structures in solid dielectrics. , 1993, Physical review. B, Condensed matter.