论文信息 - Analysis profile of the fully grouted rock bolt in jointed rock using analytical and numerical methods

Analysis profile of the fully grouted rock bolt in jointed rock using analytical and numerical methods

Abstract The purpose of this study was to investigate the effect of bolt profile on load transfer mechanism of fully grouted bolts in jointed rocks using analytical and numerical methods. Based on the analytical method with development of methods, a new model is presented. To validate the analytical model, five different profiles modeled by ANSYS software. The profile of rock bolts T 3 and T 4 with load transfer capacity, respectively 180 and 195 kN in the jointed rocks was selected as the optimum profiles. Finally, the selected profiles were examined in Tabas Coal Mine. FLAC analysis indicates that patterns 6+7 with 2NO flexi bolt 4 m better than other patterns within the faulted zone.

[1] Hossein Jalalifar,et al. A new approach in determining the load transfer mechanism in fully grouted bolts , 2006 .

[2] Chen Cao,et al. Improvement of Rock Bolt Profiles using Analytical and Numerical Methods , 2011 .

[3] Naj Aziz,et al. Modelling of Sheared Behaviour Bolts Across Joints , 2004 .

[4] Ali Sahebi,et al. Stability analysis and optimum support design of a roadway in a faulted zone during longwall face retreat - case study : Tabas Coal Mine , 2010 .

[5] Naj Aziz,et al. Advanced numerical modelling methods of rock bolt performance in underground mines , 2010 .

[6] Najdat I. Aziz,et al. Bolt surface configurations and load transfer mechanism , 2006 .

[7] Hossein Jalalifar,et al. Stability analysis of Tabas coal mine roadway using empirical and numerical methods , 2010 .

[8] Naj Aziz,et al. Study of Load Transfer Capacity of Bolts Using Short Encapsulation Push Test , 2003 .

[9] H. Jalalifar. An analytical solution to predict axial load along fully grouted bolts in an elasto-plastic rock mass , 2011 .

[10] Li Bin,et al. Back analysis of grouted rock bolt pullout strength parameters from field tests , 2012 .

[11] Michel Tijani,et al. A new analytical solution to the mechanical behaviour of fully grouted rockbolts subjected to pull-out tests , 2011 .

[12] Alexander Remennikov,et al. Optimisation of the bolt profile configuration for load transfer enhancement , 2008 .