Crack propagation analysis of ITER Vacuum Vessel port stub with Radial Basis Functions mesh morphing

Abstract The ITER Vacuum Vessel (VV) is one of the most important components of the tokamak machine. The severe operating conditions impose a design to withstand strong dynamic loads. A special focus is put on defects embedded in the component that, due to the not total accessibility of the VV to non-destructive examination (NDE), but also to identify their minimum safe dimension, must be assessed through Fracture Mechanics (FM) analyses. Nuclear codes give useful guidelines for design verification using simplified models that, for practical sake, do not give a detailed description of the physical phenomena. Nowadays, Finite Element Method (FEM) is a common tool for the assessment of structural components, and detailed methods for Crack Propagation analyses have been developed. A novel procedure for the crack shape evolution during cyclic loadings will be presented in this article, relying on Finite Elements Analysis (FEA) in conjunction with Radial Basis Function morphing technique, allowing a fast arrangement of the existing mesh to a new configuration. The results of the proposed method are compared with those available in literature references and in nuclear codes.

[1]  Marco Evangelos Biancolini,et al.  DTT device: Conceptual design of the superconducting magnet system , 2017 .

[2]  Pietro Salvini,et al.  A balanced load mapping method based on radial basis functions and fuzzy sets , 2018, International Journal for Numerical Methods in Engineering.

[3]  M. Newman,et al.  Interpolation and approximation , 1965 .

[4]  Marco Evangelos Biancolini,et al.  A numerical technique to study arbitrary shaped cracks growing in notched elements , 2002 .

[5]  F. V. Antunes,et al.  Finite element modelling and analysis of crack shape evolution in mode-I fatigue Middle Cracked Tension specimens , 2008 .

[6]  A. Portone,et al.  Superconducting Magnet Systems in Tokamak Engineering and Optimization , 2016, IEEE Transactions on Applied Superconductivity.

[7]  Valentina Corato,et al.  Mechanical Analysis of the ENEA TF Coil Proposal for the EU DEMO Fusion Reactor , 2018, IEEE Transactions on Applied Superconductivity.

[8]  Yoon-Suk Chang,et al.  Fracture mechanics assessment of divertor vertical target under thermal loading conditions , 2019, Fusion Engineering and Design.

[9]  M. Merola,et al.  Fracture modes of ITER tungsten divertor monoblock under stationary thermal loads , 2017 .

[10]  Tokuo Teramoto,et al.  Crack propagation in first wall of fusion reactor by cyclic thermal stress , 1998 .

[11]  X. B. Lin,et al.  Fatigue growth simulation for cracks in notched and unnotched round bars , 1998 .

[12]  M. E. Biancolini,et al.  Progress in the design of the superconducting magnets for the EU DEMO , 2018, Fusion Engineering and Design.

[13]  Corrado Groth,et al.  RBF-based mesh morphing approach to perform icing simulations in the aviation sector , 2019, Aircraft Engineering and Aerospace Technology.

[14]  Corrado Groth,et al.  Geometric Parameterization Strategies for shape Optimization Using RBF Mesh Morphing , 2017 .

[15]  Leon M Keer,et al.  Stress Intensity Factors Handbook, Vol. 3 , 1993 .

[16]  Martin D. Buhmann,et al.  Radial Basis Functions: Theory and Implementations: Preface , 2003 .

[17]  Dietrich Munz,et al.  Propagation of Surface Cracks in Notched and Unnotched Rods , 1990 .

[18]  J. Rice.  A path-independent integral and the approximate analysis of strain , 1968 .

[19]  Pietro Salvini,et al.  High fidelity numerical fracture mechanics assisted by RBF mesh morphing , 2020 .

[20]  Marco Evangelos Biancolini,et al.  Radial Basis Functions Update of Digital Models on Actual Manufactured Shapes , 2019, Journal of Computational and Nonlinear Dynamics.

[21]  Yuntao Song,et al.  Fatigue and fracture analysis on EAST divertor monoblock heat sink in H-mode operation , 2018, Fusion Engineering and Design.

[22]  Gwang-Ho Kim,et al.  Application of fracture mechanical assessment to in-wall shield ribs in ITER vacuum vessel , 2017 .

[23]  Roger Smith,et al.  A finite element model for the shape development of irregular planar cracks , 1989 .

[24]  Masahide Iguchi,et al.  Structural and fracture mechanics analysis of ITER vacuum vessel , 2007 .

[25]  Alfredo Portone,et al.  F4E load transfer procedure among finite element models different in topology or in discretization , 2019 .

[26]  Corrado Groth,et al.  Crack Propagation Analysis of Near-Surface Defects with Radial Basis Functions Mesh Morphing , 2018 .

[27]  Marco Evangelos Biancolini,et al.  A new meshless approach to map electromagnetic loads for FEM analysis on DEMO TF coil system , 2015 .

[28]  T. Anderson,et al.  Fracture mechanics - Fundamentals and applications , 2017 .

[29]  Gregory E. Fasshauer,et al.  Meshfree Approximation Methods with Matlab , 2007, Interdisciplinary Mathematical Sciences.

[30]  Victor Udintsev,et al.  Fracture mechanics analysis approach to assess structural integrity of the first confinement boundaries in ITER Generic Upper Port Plug structure , 2015 .

[31]  Andrea Carpinteri,et al.  Fatigue Growth of Surface Cracks in Notched Round Bars , 2013 .

[32]  P. Paris.  A rational analytic theory of fatigue , 1961 .

[33]  Alfredo Portone,et al.  An Electromagnetic and Structural Finite Element Model of the ITER Toroidal Field Coils , 2018, IEEE Transactions on Applied Superconductivity.

[34]  Robert C. Juvinall,et al.  Fundamentals of machine component design , 1983 .

[35]  Corrado Groth,et al.  Fast high fidelity CFD/CSM fluid structure interaction using RBF mesh morphing and modal superposition method , 2019, Aircraft Engineering and Aerospace Technology.

[36]  S. Porziani,et al.  Radial basis functions mesh morphing for the analysis of cracks propagation , 2018 .