Guided wave inspection of long steel pipe using non-axisymmetric end loading transducer

In order to overcome the conventional guided wave transducer's unsuitability for piled pipe inspection, a non-axisymmetric end loading (NEL) transducer is designed and studied in this paper. Propagation of guided waves in a hollow cylinder and the circumferential distribution of echoes from notches are studied by using the finite element (FE) method under different end loading conditions. The simulated results show that when the radial angle between the first notch on a pipe and the NEL transducer is zero, the energy distribution from notch echoes is a maximum, even if there are different direction notches on the pipe. A specially designed clamp is developed to fix the NEL transducer to the pipe. Finally, the simulated and experimental results show that the circumferential and axial location of the notch on pipe can be located by rotating the NEL transducer during the process of inspection.

[1]  D. Chimenti.  Guided Waves in Plates and Their Use in Materials Characterization , 1997 .

[2]  P. Cawley,et al.  The interaction of Lamb waves with defects , 1992, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[3]  Joseph L. Rose,et al.  Ultrasonic guided wave NDE for piping , 1996 .

[4]  Peter Cawley,et al.  The Inspection of Chemical Plant Pipework Using Lamb Waves: Defect Sensitivity and Field Experience , 1996 .

[5]  D. Gazis.  Three‐Dimensional Investigation of the Propagation of Waves in Hollow Circular Cylinders. I. Analytical Foundation , 1959 .

[6]  Joseph L. Rose,et al.  A guided wave inspection technique for nuclear steam generator tubing , 1994 .

[7]  Moon Ho Park,et al.  Ultrasonic inspection of long steel pipes using Lamb waves , 1996 .

[8]  J. Rose,et al.  Lamb wave scattering analysis for reflector characterization , 1997, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[9]  Laser-based ultrasound arrays for generation and detection of narrowband, single mode Lamb waves , 1994, 1994 Proceedings of IEEE Ultrasonics Symposium.

[10]  Joseph L. Rose,et al.  A comb transducer for guided wave generation and mode selection , 1996, 1996 IEEE Ultrasonics Symposium. Proceedings.

[11]  H. Kwun,et al.  The magnetostrictive sensor technology for long range guided wave testing and monitoring of structures , 2003 .

[12]  J. Li,et al.  Excitation and propagation of non-axisymmetric guided waves in a hollow cylinder. , 2001, The Journal of the Acoustical Society of America.

[13]  Shin,et al.  Guided waves by axisymmetric and non-axisymmetric surface loading on hollow cylinders , 1999, Ultrasonics.

[14]  Hideo Nishino,et al.  Modal Analysis of Hollow Cylindrical Guided Waves and Applications , 2001 .

[15]  Peter Cawley,et al.  Long range propagation of Lamb waves in chemical plant pipework , 1997 .

[16]  W. Mohr,et al.  On Inspection of Thin-Walled Tubes for Transverse and Longitudinal Flaws by Guided Ultrasonic Waves , 1976, IEEE Transactions on Sonics and Ultrasonics.

[17]  M. Lowe,et al.  The Reflection of Guided Waves From Circumferential Notches in Pipes , 1998 .

[18]  Joseph L. Rose,et al.  An elastodynami`c hybrid boundary element study for elastic guided wave interactions with a surface breaking defect , 2000 .

[19]  D. Hutchins,et al.  Lamb-wave tomography using non-contact transduction , 1993 .

[20]  Younho Cho,et al.  A boundary element solution for a mode conversion study on the edge reflection of Lamb waves , 1996 .

[21]  Joseph L. Rose,et al.  Excitation of guided elastic wave modes in hollow cylinders by applied surface tractions , 1992 .

[22]  M. Lowe,et al.  The Mode Conversion of a Guided Wave by a Part-Circumferential Notch in a Pipe , 1998 .

[23]  P. Cawley,et al.  A two-dimensional Fourier transform method for the measurement of propagating multimode signals , 1991 .

[24]  Joseph L. Rose,et al.  Multimode guided wave inspection of piping using comb transducers , 1999 .

[25]  Michel Brissaud,et al.  Magnetostrictive pulse-echo device for non-destructive evaluation of cylindrical steel materials using longitudinal guided waves , 2002 .

[26]  Peter Cawley,et al.  The excitation of Lamb waves in pipes using dry-coupled piezoelectric transducers , 1996 .

[27]  M. Silk,et al.  The propagation in metal tubing of ultrasonic wave modes equivalent to Lamb waves , 1979 .

[28]  D. Gazis.  Three‐Dimensional Investigation of the Propagation of Waves in Hollow Circular Cylinders. II. Numerical Results , 1959 .

[29]  J. Ditri.  Utilization of guided elastic waves for the characterization of circumferential cracks in hollow cylinders , 1994 .