Analytical Solution for Externally Bonded Joints Considering Snap-Back

AbstractStudying interfacial behavior is important for a composite structure involving relative movement or slip at its joint interface. Recent experimental and theoretical studies on bond interfaces have found that snap-back phenomenon may occur, in certain scenarios, in monotonic pull-off tests where interfacial slip in some local region is opposite to that in other areas. Little is known about the snap-back phenomenon at present, such as the conditions under which it occurs, distribution and development of reverse slip fields, and whether and how it affects global load-deformation responses. Further and more in depth investigations into the snap-back problem are necessary for better understanding of joint interfaces; e.g., in experimental bond tests with digital image correlation (DIC) technology where detailed interfacial movements on a whole bond interface are recorded for identification of interfacial properties. Therefore, this work attempts to study the snap-back problem in detail through analytic...

[1]  Cheng Jiang,et al.  Quantification of Bond-Slip Relationship for Externally Bonded FRP-to-Concrete Joints , 2013 .

[2]  Zhishen Wu,et al.  Bond Behavior between Basalt Fiber–Reinforced Polymer Sheet and Concrete Substrate under the Coupled Effects of Freeze-Thaw Cycling and Sustained Load , 2013 .

[3]  D. Ferretti,et al.  Debonding behavior of ancient masonry elements strengthened with CFRP sheets , 2013 .

[4]  L. Feo,et al.  Bond-Slip Relations for PBO-FRCM Materials Externally Bonded to Concrete , 2012 .

[5]  Cheng Jiang,et al.  Analytical solution for the bond strength of externally bonded reinforcement , 2012 .

[6]  Kang Liu,et al.  Analytical identification of bond–slip relationship of EB-FRP joints , 2012 .

[7]  Daniele Ferretti,et al.  Shear tests of carbon fiber plates bonded to concrete with control of snap-back , 2011 .

[8]  M. D. Ludovico,et al.  FRP-to-concrete interface debonding: Experimental calibration of a capacity model , 2011 .

[9]  G. Zavarise,et al.  Linear Elastic Fracture Mechanics Approach to Plate End Debonding in Rectilinear and Curved Plated Beams , 2010 .

[10]  Yanchun Yun,et al.  Analytical modeling of the bond–slip relationship at FRP-concrete interfaces for adhesively-bonded joints , 2010 .

[11]  Sang-Kyun Woo,et al.  Experimental study on interfacial behavior of CFRP-bonded concrete , 2010 .

[12]  Yufei Wu,et al.  Unified Strength Model Based on Hoek-Brown Failure Criterion for Circular and Square Concrete Columns Confined by FRP , 2010 .

[13]  Alberto Carpinteri,et al.  Analysis of Snap-Back Instability due to End-Plate Debonding in Strengthened Beams , 2010 .

[14]  A. Carpinteri,et al.  Edge debonding in FRP strengthened beams: Stress versus energy failure criteria , 2009 .

[15]  C. Mazzotti,et al.  A new single-shear set-up for stable debonding of FRP–concrete joints , 2009 .

[16]  Waiching Tang,et al.  Performance of FRP bonding systems under fatigue loading , 2008 .

[17]  Oded Rabinovitch,et al.  Cohesive Interface Modeling of Debonding Failure in FRP Strengthened Beams , 2008 .

[18]  Yu-Fei Wu,et al.  Interfacial stresses of FRP strengthened concrete beams: Effect of shear deformation , 2007 .

[19]  Houssam Toutanji,et al.  Prediction of Interfacial Bond Failure of FRP–Concrete Surface , 2007 .

[20]  Tamon Ueda,et al.  Unified Analytical Approaches for Determining Shear Bond Characteristics of FRP-Concrete Interfaces through Pullout Tests , 2006 .

[21]  Michel Ghosn,et al.  Experimental Investigation and Fracture Analysis of Debonding between Concrete and FRP Sheets , 2006 .

[22]  Jin-Guang Teng,et al.  Bond-slip models for FRP sheets/plates bonded to concrete , 2005 .

[23]  Jian fei Chen,et al.  Experimental study on FRP-to-concrete bonded joints , 2005 .

[24]  Tamon Ueda,et al.  Development of the Nonlinear Bond Stress-Slip Model of Fiber Reinforced Plastics Sheet-Concrete Interfaces with a Simple Method , 2005 .

[25]  Zhishen Wu,et al.  Full-range behavior of FRP-to-concrete bonded joints , 2004 .

[26]  A. Carpinteri,et al.  Cohesive crack model description of ductile to brittle size-scale transition: dimensional analysis vs. renormalization group theory , 2003 .

[27]  Zhishen Wu,et al.  Stress Transfer and Fracture Propagation in Different Kinds of Adhesive Joints , 2002 .

[28]  Jian fei Chen,et al.  Anchorage strength models for FRP and steel plates bonded to concrete , 2001 .

[29]  K. Neale,et al.  Transfer Lengths and Bond Strengths for Composites Bonded to Concrete , 1999 .

[30]  Yasuhiko Sato,et al.  Experimental Study on Bond Strength of Continuous Carbon Fiber Sheet , 1999, SP-188: 4th Intl Symposium - Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures.

[31]  A. Nanni,et al.  Contribution of Externally Bonded FRP to Shear Capacity of RC Flexural Members , 1998 .

[32]  O. Buyukozturk,et al.  FAILURE BEHAVIOR OF PRECRACKED CONCRETE BEAMS RETROFITTED WITH FRP , 1998 .

[33]  Björn Täljsten,et al.  STRENGTHENING OF BEAMS BY PLATE BONDING , 1997 .

[34]  A. Nanni,et al.  BRITTLE FAILURE IN FRP PLATE AND SHEET BONDED BEAMS , 1997 .

[35]  Björn Täljsten,et al.  Strengthening of concrete prisms using the plate-bonding technique , 1996 .

[36]  Thanasis Triantafillou,et al.  Strengthening of RC beams with epoxy-bonded fibre-composite materials , 1992 .

[37]  H. Saadatmanesh,et al.  RC Beams Strengthened with GFRP Plates. I: Experimental Study , 1991 .

[38]  Thanasis Triantafillou,et al.  Post-Strengthening of R/C Beams With Epoxy-Bonded Fiber Composite Materials , 1991 .

[39]  D. Van Gemert,et al.  Force transfer in epoxy bonded steel/concrete joints , 1980 .

[40]  Riadh Al-Mahaidi,et al.  Bond characteristics of CFRP fabrics bonded to concrete members using wet lay-up method , 2004 .

[41]  U. Neubauer,et al.  DESIGN ASPECTS OF CONCRETE STRUCTURES STRENGTHENED WITH EXTERNALLY BONDED CFRP-PLATES , 1997 .