Characterization of conductive multiwall carbon nanotube/polystyrene composites prepared by latex technology

Conductive multiwall carbon nanotube/polystyrene (MWCNT/PS) composites are prepared based on latex technology. MWCNTs are first dispersed in aqueous solution of sodium dodecyl sulfate (SDS) driven by sonication and then mixed with different amounts of PS latex. From these mixtures MWCNT/PS composites were prepared by freeze-drying and compression molding. The dispersion of MWCNTs in aqueous SDS solution and in the PS matrix is monitored by UV–vis, transmission electron microscopy, electron tomography and scanning electron microscopy. When applying adequate preparation conditions, MWCNTs are well dispersed and homogeneously incorporated in the PS matrix. The percolation threshold for conduction is about 1.5 wt% of MWCNTs in the composites, and a maximum conductivity of about 1 S m 1 can be achieved. The approach presented can be adapted to other MWCNT/polymer

[1]  R. Smalley,et al.  Synthesis, Structure, and Properties of PBO/SWNT Composites & , 2002 .

[2]  Oren Regev,et al.  Toolbox for Dispersing Carbon Nanotubes into Polymers To Get Conductive Nanocomposites , 2006 .

[3]  P. Avouris,et al.  Mechanical Properties of Carbon Nanotubes , 2001 .

[4]  M. Yumura,et al.  Polymer Composites of Carbon Nanotubes Aligned by a Magnetic Field , 2002 .

[5]  Yang Bin,et al.  Composites of Polyacrylonitrile and Multiwalled Carbon Nanotubes Prepared by Gelation/Crystallization from Solution , 2004 .

[6]  J. Loos,et al.  Visualization of single-wall carbon nanotube (SWNT) networks in conductive polystyrene nanocomposites by charge contrast imaging. , 2005, Ultramicroscopy.

[7]  Yanping Wang,et al.  Study on the preparation and characterization of ultra-high molecular weight polyethylene–carbon nanotubes composite fiber , 2005 .

[8]  J. Fischer,et al.  Coagulation method for preparing single‐walled carbon nanotube/poly(methyl methacrylate) composites and their modulus, electrical conductivity, and thermal stability , 2003 .

[9]  J. Bahr,et al.  Water‐Based Single‐Walled‐Nanotube‐Filled Polymer Composite with an Exceptionally Low Percolation Threshold , 2004 .

[10]  A. Rinzler,et al.  ALIGNED SINGLE-WALL CARBON NANOTUBES IN COMPOSITES BY MELT PROCESSING METHODS , 2000 .

[11]  Arjun G. Yodh,et al.  High Weight Fraction Surfactant Solubilization of Single-Wall Carbon Nanotubes in Water , 2003 .

[12]  H. Dai,et al.  Individual single-wall carbon nanotubes as quantum wires , 1997, Nature.

[13]  Soo-Jin Park,et al.  Electrical resistivity and rheological behaviors of carbon nanotubes-filled polypropylene composites , 2004 .

[14]  J. Frank.  Electron Tomography , 1992, Springer US.

[15]  M. Endo,et al.  Nanotechnology: ‘Buckypaper’ from coaxial nanotubes , 2005, Nature.

[16]  Otto Zhou,et al.  Alignment of carbon nanotubes in a polymer matrix by mechanical stretching , 1998 .

[17]  J. Loos,et al.  Time-dependent study of the exfoliation process of carbon nanotubes in aqueous dispersions by using UV-visible spectroscopy. , 2005, Analytical chemistry.

[18]  Charles M. Lieber,et al.  Nanobeam Mechanics: Elasticity, Strength, and Toughness of Nanorods and Nanotubes , 1997 .

[19]  Milo S. P. Shaffer,et al.  Development of a dispersion process for carbon nanotubes in an epoxy matrix and the resulting electrical properties , 1999 .

[20]  R. Smalley,et al.  Reversible water-solubilization of single-walled carbon nanotubes by polymer wrapping , 2001 .

[21]  C. Shearwood,et al.  Mechanical properties and interfacial characteristics of carbon-nanotube-reinforced epoxy thin films , 2002 .

[22]  Joerg Mayer,et al.  Distribution and alignment of carbon nanotubes and nanofibrils in a polymer matrix , 2002 .

[23]  J. Loos,et al.  Strategies for dispersing carbon nanotubes in highly viscous polymers , 2005 .

[24]  S. Mecking,et al.  Aqueous Homo- and Copolymerization of Ethylene by Neutral Nickel (II) Complexes , 2001 .

[25]  J. Loos,et al.  Preparation of Conductive Nanotube–Polymer Composites Using Latex Technology , 2004 .

[26]  A. Dufresne,et al.  Processing and characterization of carbon nanotube/poly(styrene-co-butyl acrylate) nanocomposites , 2002 .

[27]  A. Kulik,et al.  Mechanical properties of carbon nanotubes , 1999 .

[28]  S. Iijima.  Helical microtubules of graphitic carbon , 1991, Nature.

[29]  T. Ebbesen,et al.  Exceptionally high Young's modulus observed for individual carbon nanotubes , 1996, Nature.

[30]  Petra Pötschke,et al.  Carbon nanotube-filled polycarbonate composites produced by melt mixing and their use in blends with polyethylene , 2004 .

[31]  Jose Maria Kenny,et al.  Thermal and mechanical properties of single-walled carbon nanotubes–polypropylene composites prepared by melt processing , 2005 .

[32]  Reshef Tenne,et al.  Stress-induced fragmentation of multiwall carbon nanotubes in a polymer matrix , 1998 .

[33]  R. Gorga,et al.  Toughness enhancements in poly(methyl methacrylate) by addition of oriented multiwall carbon nanotubes , 2004 .

[34]  Young Hee Lee,et al.  Crystalline Ropes of Metallic Carbon Nanotubes , 1996, Science.

[35]  Andrea E O'Rear,et al.  SWNT-Filled Thermoplastic and Elastomeric Composites Prepared by Miniemulsion Polymerization , 2002 .

[36]  Nadia Grossiord,et al.  Controlling the dispersion of multi-wall carbon nanotubes in aqueous surfactant solution , 2007 .

[37]  Richard A. Vaia,et al.  Framework for nanocomposites , 2004 .