Micro-mechanical analysis of the effect of ply thickness on the transverse compressive strength of polymer composites

Abstract A micro-mechanical model is used to study the effect of ply thickness on constrained 90° plies subjected to transverse compressive loading ( in situ effect). For cross-ply sublaminates with conventional, standard-thickness 90° plies, failure is dominated by fibre–matrix interface cracking and large localised plastic deformation of the matrix, forming a localised band in a plane that is not aligned with the loading direction. Ultra-thin plies show a dispersed damage mechanism, combining wedge cracking with ply fragmentation/separation. Moreover, a transverse crack suppression effect is clearly observed. To the authors’ knowledge, it is the first time an in situ effect in transverse compression has been identified. When comparing the results of the micro-mechanical model with the predictions from analytical models for the in situ effect, the same trends are obtained. These results also show that, for realistic ply thicknesses, these analytical models can be considered fairly accurate.

[1]  Christophe Baley,et al.  Porosity in Ocean Racing Yacht Composites: a Review , 2015, Applied Composite Materials.

[2]  Pedro P. Camanho,et al.  Prediction of in situ strengths and matrix cracking in composites under transverse tension and in-plane shear , 2006 .

[3]  M. G. Bader,et al.  Transverse Ply Cracking in Cross-Ply CFRP Laminates—Initiation or Propagation Controlled? , 1997 .

[4]  Notched response of non-crimp fabric thin-ply laminates: Analysis methods , 2013 .

[5]  P. Camanho,et al.  Prediction of size effects in notched laminates using continuum damage mechanics , 2007 .

[6]  J. E. Bailey,et al.  Multiple transverse fracture in 90° cross-ply laminates of a glass fibre-reinforced polyester , 1977 .

[7]  António R. Melro,et al.  Three-dimensional invariant-based failure criteria for transversely isotropic fibre-reinforced composites , 2015 .

[8]  Joël Cugnoni,et al.  Thin ply composites: Experimental characterization and modeling of size-effects , 2014 .

[9]  T. Matsuo,et al.  New Technology for Opening Various Reinforcing Fiber Tows. , 1998 .

[10]  Stephen W. Tsai,et al.  Nonlinear Elastic Behavior of Unidirectional Composite Laminae , 1973 .

[11]  M. Benzeggagh,et al.  Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus , 1996 .

[12]  H. Schürmann,et al.  FAILURE ANALYSIS OF FRP LAMINATES BY MEANS OF PHYSICALLY BASED PHENOMENOLOGICAL MODELS , 1998 .

[13]  K. Okubo,et al.  Fatigue crack constraint in plain-woven CFRP using newly-developed spread tows , 2006 .

[14]  Pedro P. Camanho,et al.  Large damage capability of non-crimp fabric thin-ply laminates , 2014 .

[15]  Pedro P. Camanho,et al.  Micromechanical analysis of polymer composites reinforced by unidirectional fibres: Part II – Micromechanical analyses , 2013 .

[16]  Chun-Gon Kim,et al.  Improvement of tensile properties of CFRP composites under LEO space environment by applying MWNTs and thin-ply , 2011 .

[17]  Z. Bažant,et al.  Crack band theory for fracture of concrete , 1983 .

[18]  J. E. Bailey,et al.  Constrained cracking in glass fibre-reinforced epoxy cross-ply laminates , 1978 .

[19]  P. Camanho,et al.  Three-dimensional failure criteria for fiber-reinforced laminates , 2013 .

[20]  Pedro P. Camanho,et al.  Generation of random distribution of fibres in long-fibre reinforced composites , 2008 .

[21]  T. Sebaey,et al.  Measurement of the in situ transverse tensile strength of composite plies by means of the real time monitoring of microcracking , 2014 .

[22]  Pedro P. Camanho,et al.  Micro-mechanical analysis of the in situ effect in polymer composite laminates , 2014 .

[23]  H. Saito,et al.  Experimental Evaluation of the Damage Growth Restraining in 90° Layer of Thin-ply CFRP Cross-ply Laminates , 2012 .

[24]  Javier Segurado Escudero,et al.  Application of digital image correlation at the microscale in fiber-reinforced composites , 2012 .

[25]  M. Kural,et al.  Experimental Determination of the In Situ Transverse Lamina Strength in Graphite/Epoxy Laminates , 1982 .

[26]  S. Tsai,et al.  Experimental studies of thin-ply laminated composites , 2007 .

[27]  K. Kawabe.  New Spreading Technology for Carbon Fiber Tow and Its Application to Composite Materials , 2008 .

[28]  Hiroshi Saito,et al.  Effect of ply-thickness on impact damage morphology in CFRP laminates , 2011 .

[29]  J. E. Bailey,et al.  On multiple transverse cracking in glass fibre epoxy cross-ply laminates , 1978 .

[30]  J. Xavier,et al.  High strain rate characterisation of unidirectional carbon-epoxy IM7-8552 in transverse compression and in-plane shear using digital image correlation , 2010 .

[31]  Fu-Kuo Chang,et al.  The In Situ Ply Shear Strength Distributions in Graphite/Epoxy Laminated Composites , 1987 .

[32]  K. Kageyama,et al.  Effect of Lamina Thickness on First Ply Failure in Multidirectionally Laminated Composites , 2004 .

[33]  R. Olsson.  Analytical prediction of damage due to large mass impact on thin ply composites , 2015 .

[34]  P. Linde,et al.  Damage occurrence at edges of non-crimp-fabric thin-ply laminates under off-axis uniaxial loading , 2014 .

[35]  H. El-Dessouky,et al.  Ultra-lightweight carbon fibre/thermoplastic composite material using spread tow technology , 2013 .

[36]  H. Saito,et al.  A study of crack suppression mechanism of thin-ply carbon-fiber-reinforced polymer laminate with mesoscopic numerical simulation , 2014 .

[37]  N. Fleck,et al.  On kink-band propagation in fiber composites , 1998 .

[38]  Pierre Ladevèze,et al.  On the validation of a damage mesomodel for laminated composites by means of open-hole tensile tests on quasi-isotropic laminates , 2011 .

[39]  Raimund Rolfes,et al.  Modeling the inelastic deformation and fracture of polymer composites – Part I: Plasticity model , 2013 .

[40]  Tomohiro Yokozeki,et al.  Damage characterization in thin-ply composite laminates under out-of-plane transverse loadings , 2010 .

[41]  T. Ogasawara,et al.  Experimental characterization of strength and damage resistance properties of thin-ply carbon fiber/toughened epoxy laminates , 2008 .

[42]  M. Wisnom,et al.  Size effects in unnotched tensile strength of unidirectional and quasi-isotropic carbon/epoxy composites , 2008 .

[43]  M. Wisnom,et al.  Pseudo-ductility and damage suppression in thin ply CFRP angle-ply laminates , 2015 .

[44]  P. Camanho,et al.  A design methodology for mechanically fastened joints in laminated composite materials , 2006 .

[45]  António R. Melro,et al.  Micromechanical analysis of polymer composites reinforced by unidirectional fibres: Part I – Constitutive modelling , 2013 .

[47]  Michael R Wisnom,et al.  Demonstration of pseudo-ductility in high performance glass-epoxy composites by hybridisation with thin-ply carbon prepreg , 2013 .

[48]  P. Camanho,et al.  Notched response of non-crimp fabric thin-ply laminates , 2013 .