Input shaping for continuum beams under longitudinal vibration

The applicability of standard input shapers to continuum longitudinal beams is presented in this paper. The effectiveness of different input shapers, specifically the zero vibration, the zero vibration and derivative, and the unity magnitude-zero vibration shapers, is investigated. Also, the sensitivity of these schemes to modelling errors is presented. Through a derivation of the equation of motion of a longitudinal beam, single mode shapers are shown to have the same vibration reducing characteristics for the first mode of continuum systems as they do for lumped parameter systems. However, the contribution of higher modes is also shown to impact the response, especially when negative input shapers are employed

[1]  Warren P. Seering,et al.  Preshaping Command Inputs to Reduce System Vibration , 1990 .

[2]  K. Weiss Vibration Problems in Engineering , 1965, Nature.

[3]  William Singhose,et al.  Concurrent Design of Input Shaping and Proportional Plus Derivative Feedback Control , 2002 .

[4]  William Singhose,et al.  LIMITING HIGH MODE VIBRATION AND RISE TIME IN FLEXIBLE TELEROBOTIC ARMS , 2000 .

[5]  William Singhose,et al.  An input shaping controller enabling cranes to move without sway , 1997 .

[6]  Stephen P. Timoshenko,et al.  Vibration problems in engineering , 1928 .

[7]  David Wang,et al.  Verification of a closed-loop shaped-input controller for a five-bar-linkage manipulator , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[8]  William Singhose,et al.  Improving repeatability of coordinate measuring machines with shaped command signals , 1996 .

[9]  Warren P. Seering,et al.  Time-Optimal Negative Input Shapers , 1997 .

[10]  G. Tallman,et al.  Analog study of dead-beat posicast control , 1958 .

[11]  Tarunraj Singh,et al.  EXACT TIME-OPTIMAL CONTROL OF THE WAVE EQUATION , 1995 .

[12]  Wayne J. Book,et al.  Filtering micro-manipulator wrist commands to prevent flexible base motion , 1995, Proceedings of 1995 American Control Conference - ACC'95.

[13]  Mark W. Noakes,et al.  Generalized inputs for damped-vibration control of suspended payloads , 1992, Robotics Auton. Syst..

[14]  A. Galip Ulsoy,et al.  An Approach to Control Input Shaping With Application to Coordinate Measuring Machines , 1999 .

[15]  R. Rayleigh The Theory of Sound, Two Volumes In One , 1945 .

[16]  Anthony Tzes,et al.  An adaptive input shaping control scheme for vibration suppression in slewing flexible structures , 1993, IEEE Trans. Control. Syst. Technol..

[17]  Otto J. M. Smith Posicast Control of Damped Oscillatory Systems , 1957, Proceedings of the IRE.