Dynamic simulation of integrated rock-bed thermocline storage for concentrated solar power

Abstract In contrast to wind and photovoltaic, concentrated solar power plants can be equipped with thermal energy storage in order to decouple intermittent energy supply and grid feed-in. The focus of this study is the technical evaluation of a cost-efficient storage concept for solar tower power plants. Consisting of a quartzite-rock bed that is charged with a hot air flow and discharged by cold air counter-flow, the storage essentially operates like a regenerator. For such systems, the discharge temperature typically declines with time. Furthermore, the use of a randomly packed bed results in considerable pressure loss. In order to describe the relevant flow and heat transfer mechanisms in rock beds used for thermal storage, a mathematical model written in the modelling language Modelica is developed and validated. Good agreement with experimental data from literature is obtained. With the aid of the validated model, a rock-bed thermal storage for application in a semi-industrial scale solar power plant (1.5 MWel) is designed and optimised with respect to electrical efficiency of the plant during the charge and discharge cycle. The storage capacity is equivalent to four hours of full-load operation. Results show that compressor work should be considered directly in the selection of packed-bed geometry in order to minimise the efficiency penalty of storage integration in the solar plant.

[1]  Anton Meier,et al.  Experiment for modelling high temperature rock bed storage , 1991 .

[2]  L. G. Radosevich,et al.  Thermal Energy Storage Development for Solar Electrical Power and Process Heat Applications , 1983 .

[3]  A. Haselbacher,et al.  Stabilization of the outflow temperature of a packed-bed thermal energy storage by combining rocks with phase change materials , 2014 .

[4]  K.G.T. Hollands,et al.  Thermal destratification in rock beds , 1984 .

[5]  Erich A. Farber,et al.  Two applications of a numerical approach of heat transfer process within rock beds , 1982 .

[6]  Aldo Steinfeld,et al.  High-temperature thermal storage using a packed bed of rocks - Heat transfer analysis and experimental validation , 2011 .

[7]  R. Saini,et al.  Nusselt number and friction factor correlations for packed bed solar energy storage system having large sized elements of different shapes , 2006 .

[8]  Junjie Yan,et al.  Correlations for predicting single phase and two-phase flow pressure drop in pebble bed flow channels , 2011 .

[9]  Luisa F. Cabeza,et al.  State of the art on high temperature thermal energy storage for power generation. Part 1—Concepts, materials and modellization , 2010 .

[10]  Gregory J. Kolb,et al.  Design Considerations for Concentrating Solar Power Tower Systems Employing Molten Salt , 2010 .

[11]  E. Achenbach.  Heat and flow characteristics of packed beds , 1993 .

[12]  Evangelos Tsotsas,et al.  Heat transfer in packed beds with fluid flow: remarks on the meaning and the calculation of a heat transfer coefficient at the wall , 1990 .

[13]  Elias K. Stefanakos,et al.  Thermal energy storage technologies and systems for concentrating solar power plants , 2013 .

[14]  E. Stefanakos,et al.  Investigation of a High-Temperature Packed-Bed Sensible Heat Thermal Energy Storage System With Large-Sized Elements , 2013 .

[15]  R. Couturier,et al.  Experimental and Numerical Investigation of Stability of Packed Bed Thermal Energy Storage for CSP Power Plant , 2014 .

[16]  Yusuke Asakuma.  Theoretical Study for Effective Thermal Conductivity with Convection and Radiation in Packed Bed , 2013 .

[17]  Luisa F. Cabeza,et al.  State of the art on high-temperature thermal energy storage for power generation. Part 2--Case studies , 2010 .

[18]  Carlos D. Perez-Segarra,et al.  Thermocline thermal storage systems for concentrated solar power plants: One-dimensional numerical model and comparative analysis , 2014 .

[19]  N. Barton.  Simulations of air-blown thermal storage in a rock bed , 2013 .

[20]  Xiumin Jiang,et al.  Thermal stress-induced fragmentation of quartzite particles in a hot fluidized bed , 2009 .

[21]  Gerhart Eigenberger,et al.  Gas flow and heat transfer through catalyst filled tubes , 2001 .

[22]  Antonio L. Avila-Marin,et al.  Volumetric receivers in Solar Thermal Power Plants with Central Receiver System technology: A review , 2011 .

[23]  K. Nithyanandam,et al.  Analysis of a Latent Thermocline Energy Storage System for Concentrating Solar Power Plants , 2012 .

[24]  Kazunobu Sagara,et al.  Thermal performance and pressure drop of rock beds with large storage materials , 1991 .

[25]  A. Waked.  Solar energy storage in rocks , 1986 .

[26]  Suresh V. Garimella,et al.  System-level simulation of a solar power tower plant with thermocline thermal energy storage , 2014 .

[27]  Suresh V. Garimella,et al.  Thermal analysis of solar thermal energy storage in a molten-salt thermocline , 2010 .

[28]  Paul Gauché,et al.  Modeling of the rock bed thermal energy storage system of a combined cycle solar thermal power plant in South Africa , 2013 .

[29]  Janez Levec,et al.  Flow through packed bed reactors: 1. Single-phase flow , 2005 .

[30]  J. Comiti,et al.  About a correlating equation for predicting pressure drops through packed beds of spheres in a large range of Reynolds numbers , 2007 .

[31]  Jon T. Van Lew,et al.  Transient Heat Transfer and Energy Transport in Packed Bed Thermal Storage Systems , 2011 .

[32]  Jon T. Van Lew,et al.  Similarity and generalized analysis of efficiencies of thermal energy storage systems , 2012 .

[33]  Gregory J. Kolb.  Evaluation of Annual Performance of 2-Tank and Thermocline Thermal Storage Systems for Trough Plants , 2011 .

[34]  Zhifeng Wang,et al.  Sensitivity analysis of the numerical study on the thermal performance of a packed-bed molten salt thermocline thermal storage system , 2012 .

[35]  Linda R. Petzold,et al.  Numerical solution of initial-value problems in differential-algebraic equations , 1996, Classics in applied mathematics.

[36]  G. Cau,et al.  ScienceDirect 68 th Conference of the Italian Thermal Machines Engineering Association , ATI 2013 Numerical investigation of a packed bed thermal energy storage system with different heat transfer fluids , 2014 .

[37]  John W. Kelton,et al.  Testing of Thermocline Filler Materials and Molten-Salt Heat Transfer Fluids for Thermal Energy Storage Systems in Parabolic Trough Power Plants , 2004 .

[38]  Sven Erik Jørgensen,et al.  Principles of environmental science and technology , 1981 .

[39]  Pitam Chandra,et al.  Pressure drop and heat transfer characteristics of air-rockbed thermal storage systems☆ , 1981 .