Numerical CFD simulations on a small-scale ORC expander using a customized grid generation methodology

Abstract Positive displacement machines are the most suitable devices for small-scale waste heat to power conversion units based on an Organic Rankine Cycle (ORC) due to their capabilities of handling small mass flow rates and high pressure ratios. Among the technologies, sliding vane machines provide unique features such as low operating revolution speed, geometrical flexibility and uncomplicated manufacturing. Nonetheless, research and product development in this field have been constrained by the lack of interfaces between deforming and moving fluid domains that characterize sliding vane devices and the design tools at the state of the art. This research work tackles this challenge and presents the development of an analytical grid generation for sliding vane machines that is based on user defined nodal displacement. Through this approach, the numerical methodology discretizes the fluid domains enclosed between the cells and ensures conservation of intrinsic quantities by maintaining the cell connectivity and structure. Transient 3D single phase simulations on a small scale ORC expander were further set up in the ANSYS CFX solver and provided insights on the main flow field as well as in the leakage paths between rotor blade tips and casing. The numerical results were eventually validated with reference to an experimental dataset related to a waste heat to power conversion application in compressed air systems where the sliding vane ORC expander worked with R236fa, at a pressure ratio of 2.65 and at 1551 RPM.

[1]  Augusto Della Torre,et al.  CFD Simulation of a Sliding Vane Expander Operating Inside a Small Scale ORC for Low Temperature Waste Heat Recovery , 2014 .

[2]  Roberto Cipollone,et al.  Fuel economy benefits of a new engine cooling pump based on sliding vane technology with variable eccentricity , 2015 .

[3]  Roberto Cipollone,et al.  Mechanical energy recovery from low grade thermal energy sources , 2014 .

[4]  Józef Rak,et al.  Experimental and Numerical Analyses on the Rotary Vane Expander Operating Conditions in a Micro Organic Rankine Cycle System , 2016 .

[5]  Roberto Cipollone,et al.  Theoretical modeling and experimental investigations for the improvement of the mechanical efficiency in sliding vane rotary compressors , 2015 .

[6]  Ahmed Kovacevic,et al.  Deforming grid generation for numerical simulations of fluid dynamics in sliding vane rotary machines , 2017, Adv. Eng. Softw..

[7]  Augusto Della Torre,et al.  Evaluating the Performance of a Rotary Vane Expander for Small Scale Organic Rankine Cycles Using CFD tools , 2014 .

[8]  Y. Huang,et al.  A measurement method for air pressures in compressor vane segments , 2008 .

[9]  Guoqing Han,et al.  Theoretical study of a novel Sliding-Vane Rotary Pump – structure analysis and its chamber pressure , 2017 .

[10]  Ahmed Kovacevic,et al.  Boundary adaptation in grid generation for CFD analysis of screw compressors , 2005 .

[11]  Roberto Cipollone,et al.  Energy saving potential in existing industrial compressors , 2016 .

[12]  Ahmed Kovacevic,et al.  Grid deformation strategies for CFD analysis of screw compressors , 2013 .

[13]  Ahmed Kovacevic,et al.  Screw Compressors: Three Dimensional Computational Fluid Dynamics and Solid Fluid Interaction , 2006 .

[14]  Xueyuan Peng,et al.  Experimental investigation on the internal working process of a CO2 rotary vane expander , 2009 .

[15]  De Ming Wang,et al.  Numerical Modeling of Vane Oil Pump with Variable Displacement , 2012 .

[16]  Roberto Cipollone,et al.  Friction power modeling and measurements in sliding vane rotary compressors , 2015 .

[17]  S. D. Probert,et al.  Multi-vane expanders: Vane dynamics and friction losses , 1985 .

[18]  Ahmed Kovacevic,et al.  Development Of A General Numerical Methodology For CFD Analyses In Sliding Vane Machines And Application On A Mid-Size Oil Injected Air Compressor , 2016 .

[19]  A. B. Tramschek,et al.  Mathematical Modelling of Radial and Non-Radial Rotary Sliding Vane Compressors , 1996 .

[20]  Roberto Cipollone,et al.  Sliding vane rotary pump in engine cooling system for automotive sector , 2015 .

[21]  Osama Al-Hawaj.  Theoretical modeling of sliding vane compressor with leakage , 2009 .

[22]  Sham Rane.  Grid Generation and CFD Analysis of Variable Geometry Screw Machines , 2015 .

[23]  H. Platts.  Hydrodynamic Lubrication of Sliding Vanes , 1976 .