Investigation on milling force of thin-walled workpiece considering dynamic characteristics of workpiece

The idea of integral calculus is used in traditional milling force prediction methods. In the traditional method, the milling cutter is divided into many micro-elements, the force of each micro-element is calculated, and then the integral summation process is applied to all the micro-elements. In traditional milling force prediction methods, both the workpiece and the tool are assumed to be rigid bodies. In this paper, the method is improved; the Fourier series expansion is used to approximate the periodic milling force and the workpiece is considered as a single degree of freedom spring-damping-vibration system. Through the forced vibration model of periodic force, the vibration displacement of the workpiece is obtained. Then, the radial cutting depth is corrected by the vibration displacement of the workpiece. Finally, the original milling force is corrected with the corrected radial cutting depth. The milling force prediction model based on thin-walled workpiece is obtained through the above process. The model is named as variable-radial-cutting-depth-algorithm (VRCDA). Finally, the accuracy of this model was verified through modal test and milling force acquisition experiments.

[1]  Yusuf Altintas,et al.  Prediction of ball-end milling forces from orthogonal cutting data , 1996 .

[2]  Yusuf Altintas,et al.  Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design , 2000 .

[3]  Junz Jiunn-jyh Wang,et al.  An analytical force model with shearing and ploughing mechanisms for end milling , 2002 .

[4]  Dong-Woo Cho,et al.  3D Ball-End Milling Force Model Using Instantaneous Cutting Force Coefficients , 2005 .

[5]  L. Gang.  Study on deformation of titanium thin-walled part in milling process , 2009 .

[6]  Jianbin Xue,et al.  Deformation prediction and error compensation in multilayer milling processes for thin-walled parts , 2009 .

[7]  Zude Zhou,et al.  A new method based on Fiber Bragg grating sensor for the milling force measurement , 2015 .

[8]  Gianni Campatelli,et al.  Improved dynamic compensation for accurate cutting force measurements in milling applications , 2015 .

[9]  Huan Luo,et al.  Real-Time Deflection Monitoring for Milling of a Thin-Walled Workpiece by Using PVDF Thin-Film Sensors with a Cantilevered Beam as a Case Study , 2016, Sensors.

[10]  Yu Guo,et al.  Modeling of cutting forces in end milling based on oblique cutting analysis , 2016 .

[11]  L. Ren,et al.  Detecting milling deformation in 7075 aluminum alloy thin-walled plates using finite difference method , 2016 .

[12]  F. Jiao,et al.  Chip formation and its effects on cutting force, tool temperature, tool stress, and cutting edge wear in high- and ultra-high-speed milling , 2016 .

[13]  Yiming Rong,et al.  Predictive model of milling force for complex profile milling , 2016 .

[14]  Bo Wang,et al.  Modeling and experimental study on the force of micro-milling titanium alloy based on tool runout , 2016 .

[15]  Adriano Fagali de Souza,et al.  Evaluating surface roughness, tool life, and machining force when milling free-form shapes on hardened AISI D6 steel , 2016 .

[16]  Eriberto Oliveira do Nascimento,et al.  Sensitivity Analysis of Cutting Force on Milling Process using Factorial Experimental Planning and Artificial Neural Networks , 2016 .

[17]  Jianguang Li,et al.  Development and testing of an integrated smart tool holder for four-component cutting force measurement , 2017 .

[18]  You Zhao,et al.  A novel dynamometer for monitoring milling process , 2017 .

[19]  Xin Jin,et al.  Development and evaluation of a three-component micro-cutting force wireless measurement apparatus and method in turning-milling compound machining , 2017 .

[20]  Zhanqiang Liu,et al.  Parametric study of dynamic response of sandwich plate under moving loads , 2018 .

[21]  Yang Ding,et al.  Investigation on chatter stability of thin-walled parts considering its flexibility based on finite element analysis , 2018 .

[22]  Zhichao Yang,et al.  Analytical modeling of tool-workpiece contact rate and experimental study in ultrasonic vibration-assisted milling of Ti–6Al–4V , 2018, International Journal of Mechanical Sciences.

[23]  Liping Wang,et al.  Machining deformation prediction of thin-walled workpieces in five-axis flank milling , 2018, The International Journal of Advanced Manufacturing Technology.

[24]  S. N. Joshi,et al.  Measurement and analysis of cutting force and product surface quality during end-milling of thin-wall components , 2018, Measurement.

[25]  Limin Zhu,et al.  Surface form error prediction in five-axis flank milling of thin-walled parts , 2018 .

[26]  Lida Zhu,et al.  Chatter detection in milling process based on VMD and energy entropy , 2018 .

[27]  Lida Zhu,et al.  Research on chatter stability in milling and parameter optimization based on process damping , 2018 .