High-performance polymer dry adhesives based on ethylene vinyl acetate copolymer and high-adhesion mechanism*

We have proposed a new soft replication fabrication method to fabricate mushroom-shaped dry adhesives with excellent high adhesion, and analyzed its performance and mechanism by taking into consideration the microstructure deformation. The large Young's modulus of ethylene-vinyl acetate (EVA) copolymer (48.0 MPa) together with rational structure design contribute to easy demolding as well as strong adhesion. The fabricated EVA dry adhesives exhibited strong normal adhesion up to 70 N/cm $^{\mathbf {2}}$, which is one of the best records reported for polymer-based dry adhesives by far. Flexible and transparent EVA dry adhesive films were readily microfabricated through our soft replication method in an inexpensive and high-throughput manner, which enables low-cost adhesive coatings for various substrates and shapes.. In addition, the non-wetting characteristics to repel water and oil makes it promising for robust self-cleaning and reusability. These results may shed new lights for the mass-production of dry adhesives, and to understand the reversible adhesion/detachment mechanism.

[1]  Ja Hoon Koo,et al.  Highly Skin‐Conformal Microhairy Sensor for Pulse Signal Amplification , 2014, Advanced materials.

[2]  Tianzhun Wu,et al.  A low-cost superlyophobic dry adhesive film based on EVA copolymer , 2015, 2015 IEEE Nanotechnology Materials and Devices Conference (NMDC).

[3]  K. Suh,et al.  A nontransferring dry adhesive with hierarchical polymer nanohairs , 2009, Proceedings of the National Academy of Sciences.

[4]  Yucheng Ding,et al.  Bio-inspired directional high-aspect-ratio nanopillars: fabrication and actuation , 2014 .

[5]  Carlo Menon,et al.  A tailless timing belt climbing platform utilizing dry adhesives with mushroom caps , 2011 .

[6]  Tianzhun Wu,et al.  Design, microfabrication and evaluation of robust high-performance superlyophobic surfaces , 2011 .

[7]  Kahp Y. Suh,et al.  Nanohairs and nanotubes: Efficient structural elements for gecko-inspired artificial dry adhesives , 2009 .

[8]  Experimental Investigation of Optimal Adhesion of Mushroomlike Elastomer Microfibrillar Adhesives. , 2015, Langmuir : the ACS journal of surfaces and colloids.

[9]  Bruce P. Lee,et al.  A reversible wet/dry adhesive inspired by mussels and geckos , 2007, Nature.

[10]  Metin Sitti,et al.  Enhanced fabrication and characterization of gecko-inspired mushroom-tipped microfiber adhesives , 2013 .

[11]  I. O. Salyer,et al.  Structure and property relationships in ethylene–vinyl acetate copolymers , 1971 .

[12]  Robert Langer,et al.  A biodegradable and biocompatible gecko-inspired tissue adhesive , 2008, Proceedings of the National Academy of Sciences.

[13]  Liangti Qu,et al.  Carbon Nanotube Arrays with Strong Shear Binding-On and Easy Normal Lifting-Off , 2008, Science.

[14]  Zikang Tang,et al.  Engineering superlyophobic surfaces on curable materials based on facile and inexpensive microfabrication , 2014 .

[15]  A. Geim,et al.  Microfabricated adhesive mimicking gecko foot-hair , 2003, Nature materials.

[16]  Huajian Gao,et al.  Effects of contact shape on the scaling of biological attachments , 2005, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[17]  M. Kwak,et al.  Rational Design and Enhanced Biocompatibility of a Dry Adhesive Medical Skin Patch , 2011, Advanced materials.

[18]  Heinz Schmid,et al.  Stability of molded polydimethylsiloxane microstructures , 1997 .

[19]  R S Fearing,et al.  High friction from a stiff polymer using microfiber arrays. , 2006, Physical review letters.

[20]  Eduard Arzt,et al.  Adhesion of bioinspired micropatterned surfaces: effects of pillar radius, aspect ratio, and preload. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[21]  R. Full,et al.  Adhesive force of a single gecko foot-hair , 2000, Nature.

[22]  Moon Kyu Kwak,et al.  Enhanced Skin Adhesive Patch with Modulus‐Tunable Composite Micropillars , 2013, Advanced healthcare materials.

[23]  Giuseppe Carbone,et al.  Origin of the superior adhesive performance of mushroom-shaped microstructured surfaces , 2011 .

[24]  Mingjun Zhang,et al.  Inspiration from the natural world: from bio-adhesives to bio-inspired adhesives , 2014 .

[25]  J. Robertson,et al.  Bio‐Inspired Hierarchical Polymer Fiber–Carbon Nanotube Adhesives , 2014, Advanced materials.

[26]  Insol Hwang,et al.  Continuous and scalable fabrication of bioinspired dry adhesives via a roll-to-roll process with modulated ultraviolet-curable resin. , 2014, ACS applied materials & interfaces.

[27]  Tianzhun Wu,et al.  Modeling Pressure Stability and Contact-Angle Hysteresis of Superlyophobic Surfaces Based on Local Contact Line , 2015 .

[28]  Moon Kyu Kwak,et al.  Stretchable, adhesion-tunable dry adhesive by surface wrinkling. , 2010, Langmuir : the ACS journal of surfaces and colloids.

[29]  Chang Liu,et al.  Re-configurable fluid circuits by PDMS elastomer micromachining , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).

[30]  R. Full,et al.  Evidence for van der Waals adhesion in gecko setae , 2002, Proceedings of the National Academy of Sciences of the United States of America.

[31]  Stanislav N. Gorb,et al.  Mushroom-shaped geometry of contact elements in biological adhesive systems , 2007 .

[32]  S. B. Yamaki,et al.  Static and Dynamic Fluorescence of Pyrene as Probes of Site Polarity and Morphology in Ethylene-co-(Vinyl Acetate) (Eva) Films , 2000 .

[33]  Eduard Arzt,et al.  Patterned Surfaces with Pillars with Controlled 3D Tip Geometry Mimicking Bioattachment Devices , 2007 .

[34]  Yuji Suzuki,et al.  Engineering superlyophobic surfaces as the microfluidic platform for droplet manipulation. , 2011, Lab on a chip.