Intergranular corrosion resistance of nickel-based alloy 690 weldments

[1]  E. Han,et al.  Effect of mono-tension and biaxial tension on microstructure and stress corrosion cracking of Alloy 690TT , 2009 .

[2]  Hwa-Teng Lee,et al.  Correlation between corrosion resistance properties and thermal cycles experienced by gas tungsten arc welding and laser beam welding Alloy 690 butt weldments , 2009 .

[3]  Hwa-Teng Lee,et al.  The effects of peak temperature and cooling rate on the susceptibility to intergranular corrosion of alloy 690 by laser beam and gas tungsten arc welding , 2009 .

[4]  Yutaka S. Sato,et al.  Reassessment of the effects of laser surface melting on IGC of SUS 304 , 2008 .

[5]  Yutaka S. Sato,et al.  Arrest of weld-decay in 304 austenitic stainless steel by twin-induced grain boundary engineering , 2007 .

[6]  P. M. Scott,et al.  1 – An overview of materials degradation by stress corrosion in PWRs , 2007 .

[7]  Shuang Xia,et al.  Effects of strain and annealing processes on the distribution of Σ3 boundaries in a Ni-based superalloy , 2006 .

[8]  Joung-Soo Kim,et al.  The effect of grain boundary misorientation on the intergranular M23C6 carbide precipitation in thermally treated Alloy 690 , 2004 .

[9]  Jae-Do Kim,et al.  C-ring stress corrosion test for Inconel 600 and Inconel 690 sleeve joint welded by Nd:YAG laser , 2004 .

[10]  Joung-Soo Kim,et al.  Influence of laser surface melting on the susceptibility to intergranular corrosion of sensitized Alloy 600 , 2001 .

[11]  P. Lin,et al.  Influence of grain boundary character distribution on sensitization and intergranular corrosion of alloy 600 , 1995 .

[12]  D. Radaj.  Heat Effects of Welding: Temperature Field, Residual Stress, Distortion , 1992 .

[13]  R. A. Page,et al.  Relative stress corrosion susceptibilities of alloys 690 and 600 in simulated boiling water reactor environments , 1986 .