Safety analysis and control of a robotic spinal surgical system

Abstract Screw path drilling is one of the most common and high-risk operations in many kinds of orthopedic surgery, especially in spinal surgeries. During spinal surgery, the bone screws are inserted into the vertebral body from the narrow vertebral pedicles. Any failures in this process will hurt important vessels and nerves of the patient. In this paper two aspects of the safety issues with using the Robotic Spinal Surgery System (RSSS) are analyzed: movement control and real-time operation control. For the safety motion control of the RSSS, two modes are developed: the cooperative control mode for positioning and the fine adjustment mode for precisely adjusting orientation. An automatic calibration algorithm for force/torque sensors is proposed to eliminate gravity effects. Guidance Virtual Fixtures (GVFs) and Forbidden Region Virtual Fixtures (FRVFs) are used to limit the movement of the RSSS. Damping Region Virtual Fixtures (DRVFs) are proposed to prevent the RSSS from crossing the constraint surface and harming the patient’s body. In the path drilling process, a state recognition algorithm is proposed to simulate the feeling in the hand of the surgeon during surgery. Based on force feature extraction and state recognition algorithm, 5 states in the drilling process are recognized, and the control point, which is the stop point of drilling, is found. Experiments are carried out to verify the DRVFs effects in the motion control of RSSS, the state recognition and safety control of the pedicle drilling.

[1]  Russell H. Taylor,et al.  Telerobotic Control by Virtual Fixtures for Surgical Applications , 2007, Advances in Telerobotics.

[2]  Wen-Yo Lee,et al.  Control and breakthrough detection of a three-axis robotic bone drilling system , 2006 .

[3]  Kaddour Bouazza-Marouf,et al.  The detection of drill bit break-through for the enhancement of safety in mechatronic assisted orthopaedic drilling , 1999 .

[4]  P. E. Fehlaul.  Comparing a recursive digital filter with the moving-average and sequential probability-ratio detection methods for SNM portal monitors , 1990 .

[5]  T. Steffen,et al.  The efficacy of interconnected porous hydroxyapatite in achieving posterolateral lumbar fusion in sheep. , 2000, Spine.

[6]  Valentina Colla,et al.  Wavelet-based control of penetration in a mechatronic drill for orthopaedic surgery , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).

[7]  Louis B. Rosenberg,et al.  Virtual fixtures: Perceptual tools for telerobotic manipulation , 1993, Proceedings of IEEE Virtual Reality Annual International Symposium.

[8]  S. Yerby,et al.  Comparative Morphometry of L4 Vertebrae: Comparison of Large Animal Models for the Human Lumbar Spine , 2002, Spine.

[9]  Wen-Yo Lee,et al.  Force control and breakthrough detection of a bone-drilling system , 2003, IEEE/ASME Transactions on Mechatronics.

[10]  Russell H. Taylor,et al.  Constrained control for surgical assistant robots , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[11]  Gregory D. Hager,et al.  Spatial motion constraints: theory and demonstrations for robot guidance using virtual fixtures , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[12]  Wan Kyun Chung,et al.  Automated surgical planning and evaluation algorithm for spinal fusion surgery with three-dimensional pedicle model , 2011, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[13]  Ben Horan,et al.  Haptic Microrobotic Cell Injection System , 2014, IEEE Systems Journal.

[14]  Roger P. Jackson,et al.  Operative Spine Surgery , 1999 .

[15]  Xiang-Yang Wang,et al.  Anatomy of large animal spines and its comparison to the human spine: a systematic review , 2009, European Spine Journal.

[16]  Shih-Tseng Lee,et al.  Force control and breakthrough detection of a bone-drilling system , 2004 .

[17]  Allison M. Okamura,et al.  Stable Forbidden-Region Virtual Fixtures for Bilateral Telemanipulation , 2006 .

[18]  Kouhei Ohnishi,et al.  Telerobotic-assisted bone-drilling system using bilateral control with feed operation scaling and cutting force scaling , 2012, The international journal of medical robotics + computer assisted surgery : MRCAS.

[19]  Alin Albu-Schäffer,et al.  Static calibration of the DLR medical robot MIRO, a flexible lightweight robot with integrated torque sensors , 2011, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[20]  Wan Kyun Chung,et al.  Human-guided surgical robot system for spinal fusion surgery: CoRASS , 2008, 2008 IEEE International Conference on Robotics and Automation.

[21]  Russell H. Taylor,et al.  Spatial Motion Constraints Using Virtual Fixtures Generated by Anatomy , 2007, IEEE Transactions on Robotics.

[22]  H S An,et al.  Saline injection technique to confirm pedicle screw path: a cadaveric study. , 1998, American journal of orthopedics.

[23]  Marcos Louredo,et al.  DRIBON: A mechatronic bone drilling tool , 2012 .

[24]  Il Hong Suh,et al.  A Noble Bilateral Teleoperation System for Human Guided Spinal Fusion , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[25]  Benedetto Allotta,et al.  A hand-held drilling tool for orthopedic surgery , 1997 .