Design of space target detection system based on a two-dimensional scanning micro-mirror

According to the mission of space detection and measurement, a space target detection system based on a two-dimensional scanning micro-mirror and a laser rangefinder is presented. The micro-mirror is fabricated by MEMS technology and actuated by piezoelectricity. It has two DOF and changes the direction of the emitted laser beam for a regional 2D scanning. The scanning angles are detected by piezoresistors which are integrated in the scanning mirror. The beam reflected from the space target is received by the ranging module. With the contrast between the emitted beam and the reflected beam, the relative range to the space target is calculated by the phase-shift ranging method. With the scanning angles of micro-mirror and the corresponding time of the reflected beam, the relative orientation to the space target is calculated by the orientation module, accordingly. The system which can measure the relative position of the space target has great advantages of small volume, low power consumption and high integration. It has a wide application for space target detection and measurement in micro-spacecraft.

[1]  Takayuki Fujita,et al.  Dual-axis MEMS mirror for large deflection-angle using SU-8 soft torsion beam , 2005 .

[2]  Clifford Donald Burnside,et al.  Electromagnetic Distance Measurement , 1971, Nature.

[3]  Horacio Lamela,et al.  Low-cost three-dimensional vision system based on a low-power semiconductor laser rangefinder and a single scanning mirror , 2001 .

[4]  H.-J. Euler Achieving high-accuracy relative positioning in real-time: system design, performance and real-time results , 1994, Proceedings of 1994 IEEE Position, Location and Navigation Symposium - PLANS'94.

[5]  Tian-hua Zhou Optical analysis and design for the laser remote sensing underwater acoustical signal , 2008, Applied Optics and Photonics China.

[6]  Ming C. Wu,et al.  Linearization of a two-axis MEMS scanner driven by vertical comb-drive actuators , 2007 .

[7]  Hiroshi Goto,et al.  Micro-Scanning Laser Range Finders and Position-Attitude Determination for Formation Flight , 1999 .

[8]  Zheng You,et al.  Piezoresistor design for deflection angles decoupling measurement of two-dimensional MOEMS scanning mirror , 2007, 2007 7th IEEE Conference on Nanotechnology (IEEE NANO).

[9]  Takahide Mizuno,et al.  Two Dimensional Scanning LIDAR for Planetary Explorer , 2006 .

[10]  He Ning,et al.  The Laser Remote Sensing of Underwater Acoustic Signal , 2006, 2006 7th International Symposium on Antennas, Propagation & EM Theory.

[11]  Jiaru Chu,et al.  Design, fabrication and characterization of a bulk-PZT-actuated MEMS deformable mirror , 2007 .

[12]  M. Lescure,et al.  Compact robotics perception system based on a laser range finder coupled with silicon micromirrors , 2003 .

[13]  Bradford W. Parkinson,et al.  Autonomous fault detection and removal using GPS carrier phase , 1998 .

[14]  K. Solbach,et al.  Dielectric image line leaky wave antenna for broadside radiation , 1983 .

[15]  Shiju Jiao,et al.  An overview of the remote sensors of Chinese ZY-1 satellite: CCD camera and multi-spectral scanner , 2001, 2001 International Conferences on Info-Tech and Info-Net. Proceedings (Cat. No.01EX479).

[16]  Zhengyou Zhang,et al.  Real-Time Whiteboard Capture and Processing Using a Video Camera for Remote Collaboration , 2007, IEEE Transactions on Multimedia.