SiC-Based Bidirectional Ćuk Converter With Differential Power Processing and MPPT for a Solar Powered Aircraft

A silicon-carbide (SiC)-based dc-dc converter is developed for the solarship, a manned solar aircraft for supply delivery in remote locations. The concept of differential power processing (DPP) is utilized to realize a high-efficiency lightweight converter that performs maximum power point tracking (MPPT) to transfer power from the aircraft's wing-mounted solar array to the high-voltage lithium-battery bus. The isolated Ćuk topology is augmented with an unfolder to achieve four quadrant operation and minimize the worst-case processed power. A small-signal model is derived for control design, and it is shown that the compensation strategy differs significantly based on the operating mode. The 2.7-kW prototype is verified at a high frequency (200 kHz), high efficiency (>98%), small mass (0.604 kg), and uses no electrolytic capacitors. MPPT operation is verified on a 376-V commercial solar installation. The DPP Ćuk converter is promising for emerging solar aerospace applications.

[1]  Jia Qian,et al.  Aerodynamics analysis on solar car body based on FLUENT , 2012, World Automation Congress 2012.

[2]  Peng Liu,et al.  Research on development of electric vehicles in China , 2010, 2010 International Conference on Future Information Technology and Management Engineering.

[3]  Johan Enslin,et al.  A high-efficiency resonant solar micro-inverter , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[4]  Marcelo Gradella Villalva,et al.  Voltage regulation of photovoltaic arrays: small-signal analysis and control design , 2010 .

[5]  Massimo Vitelli,et al.  Distributed maximum power point tracking of photovoltaic arrays: Novel approach and system analysis , 2008, IEEE Transactions on Industrial Electronics.

[6]  J. Biela,et al.  Design of a Highly efficient bidirectional isolated LLC resonant converter , 2012, 2012 15th International Power Electronics and Motion Control Conference (EPE/PEMC).

[7]  Allen R. Hefner,et al.  SiC power diodes provide breakthrough performance for a wide range of applications , 2001 .

[8]  Shahrokh Farhangi,et al.  Comparison of three isolated bi-directional DC/DC converter topologies for a backup photovoltaic application , 2011, 2011 2nd International Conference on Electric Power and Energy Conversion Systems (EPECS).

[9]  Jianping Ying,et al.  Analysis and Implementation of LLC Burst Mode for Light Load Efficiency Improvement , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[10]  Nick Smith Solar flying grows wings - [electronics aviation] , 2009 .

[11]  R. M. Button An advanced photovoltaic array regulator module , 1996, IECEC 96. Proceedings of the 31st Intersociety Energy Conversion Engineering Conference.

[12]  Nikolaos Papanikolopoulos,et al.  Solar powered unmanned aerial vehicle for continuous flight: Conceptual overview and optimization , 2013, 2013 IEEE International Conference on Robotics and Automation.

[13]  Philip T. Krein,et al.  Differential Power Processing for DC Systems , 2013, IEEE Transactions on Power Electronics.

[14]  A. Emadi,et al.  Performance evaluation of the isolated bidirectional Cuk converter with integrated magnetics , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[15]  Yehui Han,et al.  Analysis of high efficiency DC/DC converter processing partial input/output power , 2013, 2013 IEEE 14th Workshop on Control and Modeling for Power Electronics (COMPEL).

[16]  M. S. Zaman,et al.  Distributed power-management architecture for a low-profile concentrating-PV system , 2012, 2012 15th International Power Electronics and Motion Control Conference (EPE/PEMC).

[17]  Young-seok Kim,et al.  The improved burst mode in the stand-by operation of power supply , 2004, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2004. APEC '04..

[18]  A. Emadi,et al.  High performance bidirectional Cuk converter for telecommunication systems , 2004, INTELEC 2004. 26th Annual International Telecommunications Energy Conference.

[19]  Mosaddequr Rahman,et al.  A two-seater light-weight solar powered clean car: Preliminary design and economic analysis , 2014, 2014 3rd International Conference on the Developments in Renewable Energy Technology (ICDRET).

[20]  Arthur G. Birchenough,et al.  A High Efficiency DC Bus Regulator / RPC for Spacecraft Applications , 2004 .

[21]  Bo-Hyung Cho,et al.  Electrolytic capacitor-less PV converter for full lifetime guarantee interfaced with DC distribution , 2012, Proceedings of The 7th International Power Electronics and Motion Control Conference.

[22]  L.-A. Dessaint,et al.  A Generic Battery Model for the Dynamic Simulation of Hybrid Electric Vehicles , 2007, 2007 IEEE Vehicle Power and Propulsion Conference.

[23]  P.L. Chapman,et al.  Comparison of Photovoltaic Array Maximum Power Point Tracking Techniques , 2007, IEEE Transactions on Energy Conversion.

[24]  Y. Perriard,et al.  Round the world flight with a solar aircraft: complex system optimization process Yves Perriard, Senior Member, Patrick Ragot, Student Member, Miroslav Markovic, Member Ecole Polytechnique F6d6rale de Lausanne (EPFL) , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[25]  Marian K. Kazimierczuk,et al.  Efficiency of the transformer Cuk PWM converter , 1993, Proceedings of the IEEE 1993 National Aerospace and Electronics Conference-NAECON 1993.

[26]  M. Sadi,et al.  Solar Power System for experimental unmanned aerial vehicle (UAV); design and fabrication , 2011, 2011 2nd Power Electronics, Drive Systems and Technologies Conference.

[27]  Geoffrey R. Walker,et al.  Photovoltaic DC-DC module integrated converter for novel cascaded and bypass grid connection topologies - design and optimisation , 2006 .

[28]  Olivier Trescases,et al.  Analysis of partial power processing distributed MPPT for a PV powered electric aircraft , 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).

[29]  Ran Dai,et al.  Optimal path planning and power allocation for a long endurance solar-powered UAV , 2013, 2013 American Control Conference.

[30]  P. R. Kumar,et al.  The optimal use of the solar powered automobile , 1999 .

[31]  J. Connors On the Subject of Solar Vehicles and the Benefits of the Technology , 2007, 2007 International Conference on Clean Electrical Power.

[32]  Martin Lukasiewycz,et al.  System architecture and software design for Electric Vehicles , 2013, 2013 50th ACM/EDAC/IEEE Design Automation Conference (DAC).

[33]  Marta Molinas,et al.  Large scale regional adoption of electric vehicles in Norway and the potential for using wind power as source , 2013, 2013 International Conference on Clean Electrical Power (ICCEP).

[34]  K.S. Tang,et al.  A ZCS bidirectional flyback DC/DC converter , 2004, IEEE Transactions on Power Electronics.

[35]  Sarvapali D. Ramchurn,et al.  Managing Electric Vehicles in the Smart Grid Using Artificial Intelligence: A Survey , 2015, IEEE Transactions on Intelligent Transportation Systems.

[36]  Johann W. Kolar,et al.  Classification and Comparative Evaluation of PV Panel-Integrated DC–DC Converter Concepts , 2012, IEEE Transactions on Power Electronics.

[37]  D.M. Divan,et al.  Performance characterization of a high power dual active bridge DC/DC converter , 1990, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting.

[38]  J.W. Kolar,et al.  A comparative evaluation of isolated bi-directional DC/DC converters with wide input and output voltage range , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..