Sensor Architectures and Technologies for Upper Limb 3D Surface Reconstruction: A Review
暂无分享,去创建一个
Sandro Barone | Alessandro Paoli | Paolo Neri | Francesco Tamburrino | Armando V Razionale | S. Barone | A. Paoli | A. Razionale | P. Neri | F. Tamburrino
[1] Jonathan Kofman,et al. Real-time 3D surface-shape measurement using background-modulated modified Fourier transform profilometry with geometry-constraint , 2019, Optics and Lasers in Engineering.
[2] Jinwoong Kim,et al. Development of Real-Time Hand Gesture Recognition for Tabletop Holographic Display Interaction Using Azure Kinect , 2020, Sensors.
[3] ZhenZhou Wang,et al. Single-shot three-dimensional reconstruction based on structured light line pattern , 2018, Optics and Lasers in Engineering.
[4] Pedro Arias,et al. Metrological comparison between Kinect I and Kinect II sensors , 2015 .
[5] Monika Michalíková,et al. Innovative approaches to designing and manufacturing a prosthetic thumb. , 2020, Prosthetics and orthotics international.
[6] Sandro Barone,et al. Low-frame-rate single camera system for 3D full-field high-frequency vibration measurements , 2019, Mechanical Systems and Signal Processing.
[7] Carme Torras,et al. ToF cameras for active vision in robotics , 2014 .
[8] Xianyu Su,et al. Fourier transform profilometry:: a review , 2001 .
[9] Sandro Barone,et al. Design and manufacturing of patient-specific orthodontic appliances by computer-aided engineering techniques , 2018, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[10] Yvon Voisin,et al. Calibration of a three-dimensional reconstruction system using a structured light source , 2002 .
[11] M. Kouchi. Anthropometric methods for apparel design: Body measurement devices and techniques , 2014 .
[12] Ping-Sing Tsai,et al. Shape from Shading: A Survey , 1999, IEEE Trans. Pattern Anal. Mach. Intell..
[13] Xin Li,et al. Digital anthropometry: a critical review , 2018, European Journal of Clinical Nutrition.
[14] D. F. Redaelli,et al. LOW-COST 3D DEVICES AND LASER SCANNERS COMPARISON FOR THE APPLICATION IN ORTHOPEDIC CENTRES , 2018, The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences.
[15] Andrea Tagliasacchi,et al. Robust Articulated-ICP for Real-Time Hand Tracking , 2015 .
[16] Lin Shi,et al. A rapid and intelligent designing technique for patient-specific and 3D-printed orthopedic cast , 2016, 3D Printing in Medicine.
[17] Hiroya Tanaka,et al. Feasibility study applying a parametric model as the design generator for 3D–printed orthosis for fracture immobilization , 2018, 3D Printing in Medicine.
[18] Alexandru Tupan,et al. Triangulation , 1997, Comput. Vis. Image Underst..
[19] Richard J. Bibb,et al. Comparing additive manufacturing technologies for customised wrist splints , 2015 .
[20] Dah-Jye Lee,et al. Review of stereo vision algorithms and their suitability for resource-limited systems , 2013, Journal of Real-Time Image Processing.
[21] Daniel J. Gould,et al. Vectra 3D Imaging for Quantitative Volumetric Analysis of the Upper Limb: A Feasibility Study for Tracking Outcomes of Lymphedema Treatment , 2018, Plastic and reconstructive surgery.
[22] S. Barone,et al. Optical Stereo-System for Full-Field High-Frequency 3D Vibration Measurements Based on Low-Frame-Rate Cameras , 2019, Lecture Notes in Mechanical Engineering.
[23] Khalil Khalili,et al. A Fast and Low-Cost Human Body 3D Scanner Using 100 Cameras , 2020, J. Imaging.
[24] Lapo Governi,et al. A CAD-based Procedure for Designing 3D Printable Arm-Wrist-Hand Cast , 2018 .
[25] Song Zhang,et al. Trapezoidal phase-shifting method for 3D shape measurement , 2004, SPIE Optics East.
[26] Zhenzhou Wang,et al. Review of real-time three-dimensional shape measurement techniques , 2020 .
[27] Song Zhang,et al. High-speed 3D shape measurement with structured light methods: A review , 2018, Optics and Lasers in Engineering.
[28] Pierre Grussenmeyer,et al. Assessment of the accuracy of 3D models obtained with DSLR camera and Kinect v2 , 2015, Optical Metrology.
[29] Alberto Signoroni,et al. Deformable registration using patch-wise shape matching , 2014, Graph. Model..
[30] Monica Carfagni,et al. Fast and low cost acquisition and reconstruction system for human hand-wrist-arm anatomy , 2017 .
[31] Andrew W. Fitzgibbon,et al. KinectFusion: Real-time dense surface mapping and tracking , 2011, 2011 10th IEEE International Symposium on Mixed and Augmented Reality.
[32] Matthias Nießner,et al. State of the Art on 3D Reconstruction with RGB‐D Cameras , 2018, Comput. Graph. Forum.
[33] Pierre Graebling,et al. Design of a Monochromatic Pattern for a Robust Structured Light Coding , 2007, 2007 IEEE International Conference on Image Processing.
[34] Monica Carfagni,et al. Metrological and Critical Characterization of the Intel D415 Stereo Depth Camera , 2018, Sensors.
[35] Monica Carfagni,et al. On the Performance of the Intel SR30 Depth Camera: Metrological and Critical Characterization , 2017, IEEE Sensors Journal.
[36] Bing Pan,et al. Digital image correlation for surface deformation measurement: historical developments, recent advances and future goals , 2018, Measurement Science and Technology.
[37] Tokuo Tsuji,et al. High-speed 3D image acquisition using coded structured light projection , 2007, 2007 IEEE/RSJ International Conference on Intelligent Robots and Systems.
[38] Marc Levoy,et al. Real-time 3D model acquisition , 2002, ACM Trans. Graph..
[39] Chuang-Yuan Chiu,et al. Comparison of depth cameras for three-dimensional reconstruction in medicine , 2019, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[40] Brad E Dicianno,et al. Innovations With 3‐Dimensional Printing in Physical Medicine and Rehabilitation: A Review of the Literature , 2016, PM & R : the journal of injury, function, and rehabilitation.
[41] Monica L H Jones,et al. Anthropometric Dimensions of Individuals With High Body Mass Index , 2019, Hum. Factors.
[42] Yasushi Yagi,et al. Dynamic scene shape reconstruction using a single structured light pattern , 2008, 2008 IEEE Conference on Computer Vision and Pattern Recognition.
[43] Alberto Signoroni,et al. 3D scanning and geometry processing techniques for customised hand orthotics: an experimental assessment , 2018 .
[44] Mitsuo Takeda,et al. Fourier transform profilometry , 2000 .
[45] Emanuele Zappa,et al. Static and dynamic features of Fourier transform profilometry: A review , 2012 .
[46] Stephen Charles Hsu,et al. Performance of a Time-of-Flight Range Camera for Intelligent Vehicle Safety Applications , 2006 .
[47] Sandro Barone,et al. 3D acquisition and stereo-camera calibration by active devices: A unique structured light encoding framework , 2020 .
[48] Mircea Nicolescu,et al. Vision-based hand pose estimation: A review , 2007, Comput. Vis. Image Underst..
[49] Luc Van Gool,et al. Real-time range acquisition by adaptive structured light , 2006, IEEE Transactions on Pattern Analysis and Machine Intelligence.
[50] T. Maal,et al. Development of a three-dimensional hand model using 3D stereophotogrammetry: Evaluation of landmark reproducibility. , 2015, Journal of plastic, reconstructive & aesthetic surgery : JPRAS.
[51] D. Meadows,et al. Generation of surface contours by moiré patterns. , 1970, Applied optics.
[52] A Agustsson,et al. Validity and reliability of an iPad with a three-dimensional camera for posture imaging. , 2019, Gait & posture.
[53] Christophe Collewet,et al. Optimised De Bruijn patterns for one-shot shape acquisition , 2005, Image Vis. Comput..
[54] Anand Asundi,et al. Comparison of Fourier transform, windowed Fourier transform, and wavelet transform methods for phase extraction from a single fringe pattern in fringe projection profilometry , 2010 .
[55] Song Zhang,et al. Absolute phase retrieval methods for digital fringe projection profilometry: A review , 2018 .
[56] Gabriel Taubin,et al. One-shot scanning using De Bruijn spaced grids , 2009, 2009 IEEE 12th International Conference on Computer Vision Workshops, ICCV Workshops.
[57] Bert Arnrich,et al. Evaluation of the Pose Tracking Performance of the Azure Kinect and Kinect v2 for Gait Analysis in Comparison with a Gold Standard: A Pilot Study , 2020, Sensors.
[58] David Paloušek,et al. 3D Digitalization of the Human Body for Use in Orthotics and Prosthetics , 2012 .
[59] G. T. Reid. Moiré fringes in metrology , 1984 .
[60] Elise Lachat,et al. Assessment and Calibration of a RGB-D Camera (Kinect v2 Sensor) Towards a Potential Use for Close-Range 3D Modeling , 2015, Remote. Sens..
[61] Chih-Hsing Chu,et al. Customized designs of short thumb orthoses using 3D hand parametric models , 2019, Assistive technology : the official journal of RESNA.
[62] LevoyMarc,et al. Real-time 3D model acquisition , 2002 .
[63] Robert Sitnik,et al. Four-dimensional measurement by a single-frame structured light method. , 2009, Applied optics.
[64] Qian Chen,et al. Phase shifting algorithms for fringe projection profilometry: A review , 2018, Optics and Lasers in Engineering.
[65] S. Foix,et al. Lock-in Time-of-Flight (ToF) Cameras: A Survey , 2011, IEEE Sensors Journal.
[66] Alberto Signoroni,et al. A Critical Analysis of a Hand Orthosis Reverse Engineering and 3D Printing Process , 2016, Applied bionics and biomechanics.
[67] Jan Rosicky,et al. Application of 3D Scanning in Prosthetic and Orthotic Clinical Practice , 2016 .
[68] Caterina Rizzi,et al. 3D Scanning Procedure for the Evaluation of Lymphedema of Upper Limbs Using Low-Cost Technology: A Preliminary Study , 2019, DSMIE-2019.
[69] Min Young Kim,et al. Single shot laser speckle based 3D acquisition system for medical applications , 2018, Optics and Lasers in Engineering.
[70] David P. Towers,et al. Snapshot color fringe projection for absolute three-dimensional metrology of video sequences , 2010 .
[71] Chad English,et al. Error compensation in two-step triangular-pattern phase-shifting profilometry , 2008 .
[72] Sam Van der Jeught,et al. Real-time structured light profilometry: a review , 2016 .
[73] HoraudRadu,et al. An overview of depth cameras and range scanners based on time-of-flight technologies , 2016 .
[74] Andrew W. Fitzgibbon,et al. KinectFusion: real-time 3D reconstruction and interaction using a moving depth camera , 2011, UIST.
[75] Fu-Pen Chiang,et al. High-speed 3-D shape measurement based on digital fringe projection , 2003 .
[76] Marc Pollefeys,et al. Capturing Hands in Action Using Discriminative Salient Points and Physics Simulation , 2015, International Journal of Computer Vision.
[77] Zhenzhou Wang,et al. Three-Dimensional Hand Reconstruction by Single-Shot Structured Light Line Pattern , 2018, IEEE Access.
[78] H. A. M. Daanen,et al. 3D whole body scanners revisited , 2013, Displays.
[79] Tomáš Návrat,et al. Pilot study of the wrist orthosis design process , 2014 .
[80] Richard W. Bohannon,et al. Clinical measurement of range of motion. Review of goniometry emphasizing reliability and validity. , 1987, Physical therapy.
[81] José A. Ferrari,et al. One-shot 3D gradient field scanning , 2015 .
[82] Ligang Liu,et al. Scanning 3D Full Human Bodies Using Kinects , 2012, IEEE Transactions on Visualization and Computer Graphics.
[83] Yi Yang,et al. Depth-Based Hand Pose Estimation: Methods, Data, and Challenges , 2015, International Journal of Computer Vision.
[84] Stanislao Grazioso,et al. Design and development of a novel body scanning system for healthcare applications , 2018 .
[85] Richard J. Bibb,et al. A review of existing anatomical data capture methods to support the mass customisation of wrist splints , 2010 .
[86] Fu-Pen Chiang,et al. Color phase-shifting technique for three-dimensional shape measurement , 2006 .
[87] Zhan Song,et al. A single-shot structured light means by encoding both color and geometrical features , 2016, Pattern Recognit..
[88] Xiaohui Zhou,et al. Multiview phase shifting: a full-resolution and high-speed 3D measurement framework for arbitrary shape dynamic objects. , 2013, Optics letters.
[89] Jingang Zhong,et al. Phase retrieval of optical fringe patterns from the ridge of a wavelet transform. , 2005, Optics letters.
[90] Huhn Kim,et al. Case study: Hybrid model for the customized wrist orthosis using 3D printing , 2015 .
[91] Iman Dianat,et al. A review of the methodology and applications of anthropometry in ergonomics and product design , 2018, Ergonomics.
[92] David Rodríguez Salgado,et al. Advances in Orthotic and Prosthetic Manufacturing: A Technology Review , 2020, Materials.
[93] Domenec Puig,et al. Analysis of focus measure operators for shape-from-focus , 2013, Pattern Recognit..
[94] Yangang Wang,et al. Hand-3d-Studio: A New Multi-View System for 3d Hand Reconstruction , 2020, ICASSP 2020 - 2020 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP).
[95] Charles Soussen,et al. Flexible calibration of structured-light systems projecting point patterns , 2013, Comput. Vis. Image Underst..
[96] Bilal Msallem,et al. Three-dimensional Assessment of the Breast: Validation of a Novel, Simple and Inexpensive Scanning Process , 2019, In Vivo.
[97] Cynthia L. Istook,et al. Comparison of different body measurement techniques: 3D stationary scanner, 3D handheld scanner, and tape measurement , 2019 .
[98] Rocco Furferi,et al. A practical methodology for computer-aided design of custom 3D printable casts for wrist fractures , 2020, The Visual Computer.
[99] Alan Lewis,et al. Development of a 3D scan posture-correction procedure to facilitate the direct-digital splinting approach , 2018, Virtual and Physical Prototyping.
[100] Qi Zhou,et al. Three-dimensional reconstruction with single-shot structured light dot pattern and analytic solutions , 2020 .
[101] Monica Bordegoni,et al. A Wearable Device to Detect in Real-Time Bimanual Gestures of Basketball Players During Training Sessions , 2018, J. Comput. Inf. Sci. Eng..