A new dynamic model of crude oil fouling deposits and its application to the simulation of fouling‐cleaning cycles

Modelling of crude oil fouling in heat exchangers has been traditionally limited to a description of the deposit as a thermal resistance. However, consideration of the local change in thickness and the evolution of the properties of the deposit due to ageing or changes in foulant composition is important to capture the thermal and hydraulic impact of fouling. A dynamic, distributed, first-principles model of the deposit is presented that considers it as a multicomponent varying-thickness solid undergoing multiple reactions. For the first time, full cleaning, partial cleaning, and fouling resumption after cleaning can be simulated in any order with a single deposit model. The new model, implemented within a single tube framework, is demonstrated in a case study where various cleaning actions are applied following a period of organic deposition. It is shown that complete mechanical cleaning and chemical cleaning of different extent, according to a condition-based efficacy, can be seamlessly simulated. © 2015 American Institute of Chemical Engineers AIChE J, 62: 90–107, 2016

[1]  Sandro Macchietto,et al.  Refinery Pre-Heat Train Network Simulation Undergoing Fouling: Assessment of Energy Efficiency and Carbon Emissions , 2011 .

[2]  Vassilios S. Vassiliadis,et al.  Scheduling the cleaning actions for a fouled heat exchanger subject to ageing: MINLP formulation , 2012, Comput. Chem. Eng..

[3]  T. R. Bott.  Fouling of Heat Exchangers , 1995 .

[4]  Kevin Van Geem,et al.  Coke Formation in the Transfer Line Exchanger during Steam Cracking of Hydrocarbons , 2009 .

[5]  Lee Luong,et al.  A Review of Optimal Scheduling Cleaning of Refinery Crude Preheat Trains Subject to Fouling and Ageing , 2011 .

[6]  Sandro Macchietto,et al.  A Dynamic, Distributed Model of Shell-and-Tube Heat Exchangers Undergoing Crude Oil Fouling , 2011 .

[7]  K. Akbarzadeh,et al.  Modelling wax deposition in oil transport pipelines , 2014 .

[8]  S. Macchietto,et al.  BEYOND FOULING FACTORS : A REACTION ENGINEERING APPROACH TO CRUDE OIL FOULING MODELLING , 2015 .

[9]  Norman Epstein,et al.  Thinking about Heat Transfer Fouling: A 5 × 5 Matrix , 1983 .

[10]  William R. Paterson,et al.  Thermo-hydraulic channelling in parallel heat exchangers subject to fouling , 2008 .

[11]  Sandro Macchietto,et al.  Effects of fouling on performance of retrofitted heat exchanger networks: A thermo-hydraulic based analysis , 2011, Comput. Chem. Eng..

[12]  S. Macchietto,et al.  Impact of crude oil fouling composition on the thermohydraulic performance of refinery heat exchangers , 2015 .

[13]  S. Macchietto,et al.  CRUDE OIL FOULING DEPOSITION , SUPPRESSION , REMOVAL-AND HOW TO TELL THE DIFFERENCE , 2015 .

[14]  Donald J. Cleland,et al.  A new structural model of effective thermal conductivity for heterogeneous materials with co-continuous phases , 2008 .

[15]  C. B. Panchal,et al.  Analysis of Exxon crude-oil-slip stream coking data , 1995 .

[16]  Mahmoud Bayat,et al.  CFD modeling of fouling in crude oil pre-heaters , 2012 .

[17]  Barry Crittenden,et al.  Fouling thresholds in bare tubes and tubes fitted with inserts , 2012 .

[18]  B. L. Yeap,et al.  Mitigation of Crude Oil Refinery Heat Exchanger Fouling Through Retrofits Based on Thermo-Hydraulic Fouling Models , 2004 .

[19]  H. Scott Fogler,et al.  Morphological evolution of thick wax deposits during aging , 2001 .

[20]  M. R. Mozdianfard,et al.  A field study of fouling in CDU preheaters at Esfahan refinery , 2013 .

[21]  Kamel Hooman,et al.  CFD modeling of asphaltene deposition rate from crude oil , 2015 .

[22]  Michael C. Georgiadis,et al.  Modeling and simulation of shell and tube heat exchangers under milk fouling , 1998 .

[23]  Barry Crittenden,et al.  Fouling of crude oil preheat exchangers , 1992 .

[24]  William R. Paterson,et al.  Optimum cleaning cycles for heat transfer equipment undergoing fouling and ageing , 2011 .

[25]  Vassilios S. Vassiliadis,et al.  Identifying optimal cleaning cycles for heat exchangers subject to fouling and ageing , 2012 .

[26]  William R. Paterson,et al.  Exploration of alternative models for the aging of fouling deposits , 2011 .

[27]  Haiyong Cai,et al.  Coke formation in steam crackers for ethylene production , 2002 .

[28]  Sandro Macchietto,et al.  Detection of changes in fouling behavior by simultaneous monitoring of thermal and hydraulic performance of refinery heat exchangers , 2015 .

[29]  Sandro Macchietto,et al.  Impact of deposit ageing on thermal fouling: Lumped parameter model , 2009 .

[30]  Sandro Macchietto,et al.  Impact of deposit aging and surface roughness on thermal fouling: Distributed model , 2010 .

[31]  Hassan Al-Haj Ibrahim,et al.  Fouling in Heat Exchangers , 2012 .

[32]  Norman Epstein.  A MODEL OF THE INITIAL CHEMICAL REACTION FOULING RATE FOR FLOW WITHIN A HEATED TUBE, AND ITS VERIFICATION , 1994 .

[33]  Hans Müller-Steinhagen,et al.  Heat Exchanger Fouling: Mitigation and Cleaning Strategies , 2011 .

[34]  K. Akbarzadeh,et al.  A model of wax deposit layer formation , 2013 .

[35]  Barry Crittenden,et al.  Use of CFD to Determine Effect of Wire Matrix Inserts on Crude Oil Fouling Conditions , 2013 .