Multiinput DC–DC converters in renewable energy applications – An overview
暂无分享,去创建一个
Subhas Chandra Mukhopadhyay | Ibrahim Al-Bahadly | Zubair Rehman | S. Mukhopadhyay | I. Al-Bahadly | Zubair Rehman
[1] B.G. Dobbs,et al. A multiple-input DC-DC converter topology , 2003, IEEE Power Electronics Letters.
[2] Xinbo Ruan,et al. Synthesis of Multiple-Input DC/DC Converters , 2010, IEEE Transactions on Power Electronics.
[3] Zhe Zhang,et al. A Review and Design of Power Electronics Converters for Fuel Cell Hybrid System Applications , 2012 .
[4] Kun-Yu Lin,et al. Modeling and design of feedback loops for a voltage-mode single-inductor dual-output buck converter , 2008, 2008 IEEE Power Electronics Specialists Conference.
[5] Wei Jiang,et al. Multi-port Power Electric Interface for Renewable Energy Sources , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.
[6] Alex Q. Huang,et al. A High Step-Up Three-Port DC–DC Converter for Stand-Alone PV/Battery Power Systems , 2013, IEEE Transactions on Power Electronics.
[7] R. P. Saini,et al. A review on Integrated Renewable Energy System based power generation for stand-alone applications: Configurations, storage options, sizing methodologies and control , 2014 .
[8] Haibing Hu,et al. Multi-channel three-port DC/DC converters as maximum power tracker, battery charger and bus regulator , 2010, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).
[9] R. Teodorescu,et al. Dual input hybrid buck LC converter for a mixed wind and PV array generation system , 2012, 2012 15th International Power Electronics and Motion Control Conference (EPE/PEMC).
[10] M. Marchesoni,et al. New DC–DC Converter for Energy Storage System Interfacing in Fuel Cell Hybrid Electric Vehicles , 2007, IEEE Transactions on Power Electronics.
[11] M. Ferdowsi,et al. Review of multiple input DC-DC converters for electric and hybrid vehicles , 2005, 2005 IEEE Vehicle Power and Propulsion Conference.
[12] Wengzong Lin,et al. A novel multi-input DC-DC converter with high power efficiency , 2011, 2011 IEEE 33rd International Telecommunications Energy Conference (INTELEC).
[13] E. C. dos Santos. Single-input dual-output dc-dc buck converter , 2012, 2012 IEEE International Symposium on Industrial Electronics.
[14] Zhiliang Hong,et al. A Dual-Mode Single-Inductor Dual-Output Switching Converter With Small Ripple , 2010, IEEE Transactions on Power Electronics.
[15] Junjun Zhang,et al. A Family of Multiport Buck–Boost Converters Based on DC-Link-Inductors (DLIs) , 2015, IEEE Transactions on Power Electronics.
[16] M. Ferdowsi,et al. New Double Input DC-DC Converters for Automotive Applications , 2006, 2006 IEEE Vehicle Power and Propulsion Conference.
[17] O. Trescases,et al. A General Approach for Quantifying the Benefit of Distributed Power Electronics for Fine Grained MPPT in Photovoltaic Applications Using 3-D Modeling , 2012, IEEE Transactions on Power Electronics.
[18] Hui Li,et al. A ZVS Bi-Directional DC–DC Converter for Multiple Energy Storage Elements , 2006, IEEE Transactions on Power Electronics.
[19] Nicolae Muntean,et al. Dual input hybrid DC-DC converters , 2011, 2011 IEEE EUROCON - International Conference on Computer as a Tool.
[20] Runruo Chen,et al. Full-Bridge Three-Port Converters With Wide Input Voltage Range for Renewable Power Systems , 2012, IEEE Transactions on Power Electronics.
[21] Hui Li,et al. Design Of A 6 kW Multiple-Input Bi-directional DC-DC Converter With Decoupled Current Sharing Control For Hybrid Energy Storage Elements , 2007, APEC 07 - Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition.
[22] Tapas K. Mallick,et al. A review of Integration, Control, Communication and Metering (ICCM) of renewable energy based smart grid , 2014 .
[23] Runruo Chen,et al. A three-port half-bridge converter with synchronous rectification for renewable energy application , 2011, 2011 IEEE Energy Conversion Congress and Exposition.
[24] Sheng-Yang Yu,et al. Multiple-input soft-switching converters in renewable energy applications , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).
[25] M. Sabahi,et al. Modeling and Control of a New Three-Input DC–DC Boost Converter for Hybrid PV/FC/Battery Power System , 2012, IEEE Transactions on Power Electronics.
[26] O. Cornea,et al. Dual input hybrid buck LC converter , 2012, International Symposium on Power Electronics Power Electronics, Electrical Drives, Automation and Motion.
[27] Franco Maloberti,et al. On the design of single-inductor double-output DC-DC buck, boost and buck-boost converters , 2008, 2008 15th IEEE International Conference on Electronics, Circuits and Systems.
[28] Zhe Zhang,et al. Dual-input soft-switched DC-DC converter with isolated current-fed half-bridge and voltage-fed full-bridge for fuel cell or photovoltaic systems , 2013, 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).
[29] J.L. Duarte,et al. Multiport converters for hybrid power sources , 2008, 2008 IEEE Power Electronics Specialists Conference.
[30] Ned Mohan. First Course on Power Electronics and Drives , 1989 .
[31] L. Solero,et al. Design of multiple-input power converter for hybrid vehicles , 2004, IEEE Transactions on Power Electronics.
[32] Mehrdad Tarafdar Hagh,et al. A Nonisolated Multiinput Multioutput DC–DC Boost Converter for Electric Vehicle Applications , 2015, IEEE Transactions on Power Electronics.
[33] Zhe Zhang,et al. Modeling and control of a dual-input isolated full-bridge boost converter , 2012, 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC).
[34] Euzeli C. dos Santos,et al. Dual-output dc-dc buck converters with bidirectional and unidirectional characteristics , 2013 .
[35] Kai Sun,et al. A family of non-isolated three-port converters for stand-alone renewable power system , 2011, IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society.
[36] Ali Emadi,et al. An on-line UPS system with power factor correction and electric isolation using BIFRED converter , 2003, IECON'03. 29th Annual Conference of the IEEE Industrial Electronics Society (IEEE Cat. No.03CH37468).
[37] Kai Sun,et al. Topology Derivation of Nonisolated Three-Port DC–DC Converters From DIC and DOC , 2013, IEEE Transactions on Power Electronics.
[38] Yu Fang,et al. Topology and control of a family of non-isolated three-port DC-DC converters with a bidirectional cell , 2013, 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).
[39] Xinbo Ruan,et al. Multiple-input full bridge dc/dc converter , 2009, 2009 IEEE Energy Conversion Congress and Exposition.
[40] J.L. Duarte,et al. Triple-half-bridge bidirectional converter controlled by phase shift and PWM , 2006, Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, 2006. APEC '06..
[41] Nicolae Muntean,et al. Multiple input DC-DC topologies in renewable energy systems - A general review , 2011, 2011 IEEE 3rd International Symposium on Exploitation of Renewable Energy Sources (EXPRES).
[42] Jun Xie,et al. Design of Multiple-Input DC-DC Converter Control System for Fuel Cell Electrical Vehicle , 2009, 2009 International Conference on Energy and Environment Technology.
[43] E. Duran,et al. Comparative analysis of buck-boost converters used to obtain I–V characteristic curves of photovoltaic modules , 2008, 2008 IEEE Power Electronics Specialists Conference.
[44] Jun Xie,et al. Multiport DC/DC Converter for Stand-alone Photovoltaic Lighting System with Battery Storage , 2010, 2010 International Conference on Electrical and Control Engineering.
[45] Xuejun Ma,et al. PWM and phase-shifted control method for isolated asymmetric half- bridge bi-directional converter , 2008, 2008 IEEE Power Electronics Specialists Conference.
[46] Yaow-Ming Chen,et al. A Systematic Approach to Synthesizing Multi-Input DC/DC Converters , 2007, 2007 IEEE Power Electronics Specialists Conference.
[47] Y.-M. Chen,et al. Multi-input DC/DC converter based on the flux additivity , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).
[48] Yung-Ruei Chang,et al. High Step-Up Bidirectional Isolated Converter With Two Input Power Sources , 2009, IEEE Transactions on Industrial Electronics.
[49] Wing-Hung Ki,et al. A Novel Single-Inductor Dual-Input Dual-Output DC–DC Converter With PWM Control for Solar Energy Harvesting System , 2014, IEEE Transactions on Very Large Scale Integration (VLSI) Systems.
[50] Jorge L. Duarte,et al. Family of multiport bidirectional DC¿DC converters , 2006 .
[51] I. Batarseh,et al. Tri-Modal Half-Bridge Converter for Three-Port Interface , 2007, 2007 IEEE Power Electronics Specialists Conference.
[52] A. Kwasinski,et al. Multiple-input DC-DC converter topologies comparison , 2008, 2008 34th Annual Conference of IEEE Industrial Electronics.
[53] Alireza Bakhshai,et al. A hybrid wind-solar energy system: A new rectifier stage topology , 2010, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).
[54] Zhe Zhang,et al. Dual-input isolated full-bridge boost dc-dc converter based on the distributed transformers , 2012 .
[55] F.Z. Peng,et al. Design guideline of the isolated DC-DC converter in green power applications , 2004, The 4th International Power Electronics and Motion Control Conference, 2004. IPEMC 2004..
[56] Yung-Ruei Chang,et al. Newly Designed ZVS Multi-Input Converter , 2011, IEEE Transactions on Industrial Electronics.
[57] Hsin-Jang Shieh,et al. Modeling and Control of PV Charger System With SEPIC Converter , 2009, IEEE Transactions on Industrial Electronics.
[58] A. Kwasinski,et al. Identification of Feasible Topologies for Multiple-Input DC–DC Converters , 2009, IEEE Transactions on Power Electronics.
[59] Haibing Hu,et al. An integrated three-port inverter for stand-alone PV applications , 2010, 2010 IEEE Energy Conversion Congress and Exposition.
[60] Xudong Ma,et al. A non-isolated three-port converter for stand-alone renewable power system , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.
[61] Jian Guo Zhu,et al. A new topology of multi-input multi-output Buck-Boost DC-DC Converter for microgrid applications , 2012, 2012 IEEE International Conference on Power and Energy (PECon).
[62] A. Fereidunian,et al. Half-bridge current-fed multi-resonant bidirectional three-port DCDC converter for flexible distributed generations , 2014, The 5th Annual International Power Electronics, Drive Systems and Technologies Conference (PEDSTC 2014).
[63] Gabriel A. Rincón-Mora,et al. Single-Inductor–Multiple-Output Switching DC–DC Converters , 2009, IEEE Transactions on Circuits and Systems II: Express Briefs.
[64] Mohd Amran Mohd Radzi,et al. A current and future study on non-isolated DC–DC converters for photovoltaic applications , 2013 .
[65] Yaow-Ming Chen,et al. Double-Input PWM DC/DC Converter for High-/Low-Voltage Sources , 2006, IEEE Transactions on Industrial Electronics.
[66] Shailendra Jain,et al. A multiple source DC/DC converter topology , 2013 .
[67] D. Hyun,et al. New zero-current-transition PWM DC/DC converters without current stress , 2003 .
[68] I. Batarseh,et al. Modeling and Control of Three-Port DC/DC Converter Interface for Satellite Applications , 2010, IEEE Transactions on Power Electronics.
[69] Rong-Jong Wai,et al. High-Efficiency DC–DC Converter With Two Input Power Sources , 2012, IEEE Transactions on Power Electronics.
[70] S. Danyali,et al. Multi-input dc boost converter supplied by a hybrid PV/Wind turbine power systems for street lighting application connected to the grid , 2012, 2012 47th International Universities Power Engineering Conference (UPEC).
[71] Zhe Zhang,et al. A novel dual-input isolated current-fed DC-DC converter for renewable energy system , 2011, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).
[72] E. Sanchez-Sinencio,et al. An integrated dual-output buck converter based on sliding mode control , 2012, 2012 IEEE 3rd Latin American Symposium on Circuits and Systems (LASCAS).
[73] Weidong Xiao,et al. Topology Study of Photovoltaic Interface for Maximum Power Point Tracking , 2007, IEEE Transactions on Industrial Electronics.
[74] S. Kumaravel,et al. Design and analysis of multiple input power conditioner for solar PV/wind hybrid energy system , 2011, TENCON 2011 - 2011 IEEE Region 10 Conference.
[75] Ali Emadi,et al. An On-Line UPS System With Power Factor Correction and Electric Isolation Using BIFRED Converter , 2008, IEEE Transactions on Industrial Electronics.
[76] Fei Wang,et al. Series Asymmetrical Half-Bridge Converters With Voltage Autobalance for High Input-Voltage Applications , 2013, IEEE Transactions on Power Electronics.
[77] Cheng Wang,et al. A Novel Soft-Switching Multiport Bidirectional DC–DC Converter for Hybrid Energy Storage System , 2014, IEEE Transactions on Power Electronics.
[78] Yaow-Ming Chen,et al. Multi-input DC/DC converter based on the multiwinding transformer for renewable energy applications , 2002 .
[79] Avinash Joshi,et al. Integrated Dual-Output Converter , 2015, IEEE Transactions on Industrial Electronics.
[80] Huang-Jen Chiu,et al. A multiple-input DC/DC converter for renewable energy systems , 2005, 2005 IEEE International Conference on Industrial Technology.
[81] Jin-Hong Jeon,et al. Dynamic Modeling and Control of a Grid-Connected Hybrid Generation System With Versatile Power Transfer , 2008, IEEE Transactions on Industrial Electronics.
[82] Franco Maloberti,et al. On the design of single-inductor multiple-output DC-DC buck converters , 2008, 2008 IEEE International Symposium on Circuits and Systems.
[83] Jian Cao,et al. A Multiple-Input DC–DC Converter Topology , 2009, IEEE Transactions on Power Electronics.
[84] J.L. Duarte,et al. Three-Port Triple-Half-Bridge Bidirectional Converter With Zero-Voltage Switching , 2008, IEEE Transactions on Power Electronics.