Mechanism selection for spontaneous grain refinement in undercooled metallic melts

Abstract In a previous paper (Castle et al., 2014) [17], we employed a melt fluxing technique to study the velocity–undercooling relationship and microstructural development of a Cu–8.9 wt.% Ni alloy in order to investigate the fundamental mechanism behind the rapid solidification phenomenon of “spontaneous grain refinement”. A number of growth transitions were identified with increasing undercooling, including an extended dendrite orientation transition through: fully 〈1 0 0〉-oriented → multiply twinned, mixed 〈1 0 0〉/〈1 1 1〉-oriented → fully 〈1 1 1〉-oriented. Here, we present the results of an identical study of a Cu–Ni alloy of lower Ni content and observe a similar set of growth transitions, with some notable differences. In particular, three distinct grain refinement mechanisms have been observed between the two alloys, including: recrystallization, dendrite fragmentation and dendritic seaweed fragmentation. It appears that the mechanism selected depends strongly upon the original growth structure present, which we suggest is dictated by the balance between the capillary and kinetic anisotropies; with the addition of Ni to Cu either increasing the strength of the kinetic anisotropy, decreasing the strength of the capillary anisotropy, or a combination of both. The unambiguous identification of three different spontaneous grain refinement mechanisms in two closely related alloys is significant as it may help to resolve some of the debate surrounding the “true” grain refinement mechanism.

[1]  Andrew M. Mullis,et al.  Evidence for an extensive, undercooling-mediated transition in growth orientation, and novel dendritic seaweed microstructures in Cu–8.9 wt.% Ni , 2014 .

[2]  Yingying Zhou,et al.  Grain refinement of Fe75Ni25 alloys at low undercooling , 2008 .

[3]  P. Jarry,et al.  Electron backscattered diffraction investigation of the texture of feathery crystals in aluminum alloys , 1997 .

[4]  Dan Li,et al.  Development of grain structures in highly undercooled germanium and copper , 1996 .

[5]  Michel Rappaz,et al.  Orientation selection in dendritic evolution , 2006, Nature materials.

[6]  R. Cochrane,et al.  Growth velocity-undercooling relationships and microstructural evolution in undercooled Ge and dilute Ge-Fe alloys , 1999 .

[7]  Jean Bragard,et al.  Linking Phase-Field and Atomistic Simulations to Model Dendritic Solidification in Highly Undercooled Melts , 2001 .

[8]  R. Cochrane,et al.  The transition from the dendritic to the seaweed growth morphology during the solidification of deeply undercooled metallic melts , 2004 .

[9]  R. Cochrane,et al.  The mechanism for spontaneous grain refinement in undercooled pure Cu melts , 2004 .

[10]  K. A. Jackson,et al.  Oscillatory growth of directionally solidified ammonium chloride dendrites , 2001 .

[11]  Schwarz,et al.  Physical mechanism of grain refinement in solidification of undercooled melts. , 1994, Physical review letters.

[12]  Faivre,et al.  Symmetry-broken double fingers and seaweed patterns in thin-film directional solidification of a nonfaceted cubic crystal. , 1995, Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics.

[13]  M. Rappaz,et al.  EBSD Characterization of Dendrite Growth Directions, Texture and Misorientations in Hot-Dipped Al - Zn - Si Coatings , 2001 .

[14]  M. Rappaz,et al.  Dendritic Growth Morphologies in Al-Zn Alloys—Part II: Phase-Field Computations , 2013, Metallurgical and Materials Transactions A.

[15]  A. Karma,et al.  Quantitative phase-field modeling of dendritic growth in two and three dimensions , 1996 .

[16]  P. Jarry,et al.  〈110〉 dendrite growth in aluminum feathery grains , 1998 .

[17]  P. H. Shingu,et al.  The solidification process of highly undercooled bulk Cu-O melts , 1988 .

[18]  Y. Sawada.  Transition of growth form from dendrite to aggregate , 1986 .

[19]  Wilfried Kurz,et al.  Rapid dendrite growth in undercooled alloys , 1987 .

[20]  A. Karma,et al.  Atomistic and continuum modeling of dendritic solidification , 2003 .

[21]  Dan Li,et al.  Undercooling, crystal growth and grain structure of levitation melted pure Ge and Ge-Sn alloys , 1996 .

[22]  R. Cochrane,et al.  The mechanisms for spontaneous grain refinement in undercooled Cu–O and Cu–Sn melts , 2001 .

[23]  M. Rappaz,et al.  Dendrite growth morphologies in aluminium alloys , 1998 .

[24]  Jinfu Li,et al.  Solidification structure formation in undercooled Fe–Ni alloy , 2002 .