A novel bistable energy harvesting concept

Bistable energy harvesting has become a major field of research due to some unique features for converting mechanical energy into electrical power. When properly loaded, bistable structures snap-through from one stable configuration to another, causing large strains and consequently power generation. Moreover, bistable structures can harvest energy across a broad-frequency bandwidth due to their nonlinear characteristics. Despite the fact that snap-through may be triggered regardless of the form or frequency of exciting vibration, the external force must reach a specific snap-through activation threshold value to trigger the transition from one stable state to another. This aspect is a limiting factor for realistic vibration energy harvesting application with bistable devices. This paper presents a novel power harvesting concept for bistable composites based on a 'lever effect' aimed at minimising the activation force to cause the snap through by choosing properly the bistable structures' constraints. The concept was demonstrated with the help of numerical simulation and experimental testing. The results showed that the actuation force is one order of magnitude smaller (3%–6%) than the activation force of conventionally constrained bistable devices. In addition, it was shown that the output voltage was higher than the conventional configuration, leading to a significant increase in power generation. This novel concept could lead to a new generation of more efficient bistable energy harvesters for realistic vibration environments.

[1]  Paul M. Weaver,et al.  Analysis of thermally induced multistable composites , 2008 .

[2]  Christopher R. Bowen,et al.  Bistable composite laminates: Effects of laminate composition on cured shape and response to thermal load , 2010 .

[3]  Bruno Ando,et al.  Magnetically-Coupled Cantilevers with Antiphase Bistable Behavior for Kinetic Energy Harvesting , 2012 .

[4]  Michael W. Hyer,et al.  Some Observations on the Cured Shape of Thin Unsymmetric Laminates , 1981 .

[5]  A. F. Arrieta,et al.  Broadband vibration energy harvesting based on cantilevered piezoelectric bi-stable composites , 2013 .

[6]  Daniel Wesley Harrist.  Wireless Battery Charging System using Radio Frequency Energy Harvesting , 2004 .

[7]  S. Chatel,et al.  Material characterization and residual stresses simulation during the manufacturing process of epoxy matrix composites , 2010 .

[8]  Sutrisno Ibrahim,et al.  Power Analysis for Piezoelectric Energy Harvester , 2012 .

[9]  S. Baglio,et al.  Improved Energy Harvesting from Wideband Vibrations by Nonlinear Piezoelectric Converters , 2010 .

[10]  B. Mann,et al.  Nonlinear dynamics for broadband energy harvesting: Investigation of a bistable piezoelectric inertial generator , 2010 .

[11]  Christopher R. Bowen,et al.  Technical Notes Shape Memory Alloy-Piezoelectric Active Structures for Reversible Actuation of Bistable Composites , 2010 .

[12]  Yaowen Yang,et al.  Vibration energy harvesting using macro-fiber composites , 2009 .

[13]  Ryan L. Harne,et al.  A review of the recent research on vibration energy harvesting via bistable systems , 2013 .

[14]  J. Sirohi,et al.  Fundamental Understanding of Piezoelectric Strain Sensors , 1999, Smart Structures.

[15]  Jan M. Rabaey,et al.  Improving power output for vibration-based energy scavengers , 2005, IEEE Pervasive Computing.

[16]  C. Gauss,et al.  General Investigations of Curved Surfaces of 1827 and 1825 , 2012, Nature.

[17]  P. Hagedorn,et al.  A piezoelectric bistable plate for nonlinear broadband energy harvesting , 2010 .

[18]  Michael W. Hyer,et al.  The Room-Temperature Shapes of Four-Layer Unsymmetric Cross-Ply Laminates , 1982 .

[19]  S. Beeby,et al.  Strategies for increasing the operating frequency range of vibration energy harvesters: a review , 2010 .

[20]  Paul M. Weaver,et al.  Bistable Prestressed Symmetric Laminates , 2010 .

[21]  Mohammed F. Daqaq,et al.  Transduction of a bistable inductive generator driven by white and exponentially correlated Gaussian noise , 2011 .