IMPEDANCE MATRIX SYNTHESIS FOR MULTIPLY CONNECTED EXHAUST NETWORK SYSTEMS USING THE DIRECT MIXED-BODY BEM

[1]  Allan D. Pierce,et al.  Acoustics , 1989 .

[2]  W. Soedel,et al.  Development of a General Procedure to Formulate Four Pole Parameters by Modal Expansion and Its Application to Three-Dimensional Cavities , 1990 .

[3]  W. Soedel,et al.  Analysis of gas pulsations in multiply connected three-dimensional acoustic cavities with special attention to natural mode or wave cancellation effects , 1989 .

[4]  Zhang Zhihua,et al.  Application of the Boundary Element Method to Predicting Acoustic Performance of Expansion Chamber Mufflers With Mean Flow , 1994 .

[5]  C WanG.  Prediction and measurement of the acoustic performance of mufflers. , 1995 .

[6]  Ragnar Glav,et al.  A GENERAL FORMALISM FOR ANALYZING ACOUSTIC 2-PORT NETWORKS , 1997 .

[7]  T. W. Wu,et al.  Muffler Performance Studies Using a Direct Mixed-Body Boundary Element Method and a Three-Point Method for Evaluating Transmission Loss , 1996 .

[8]  Juichi Igarashi,et al.  FUNDAMENTALS OF ACOUSTICAL SILENCERS : (I) Theory and experiment of acoustic low-pass filters , 1958 .

[9]  A. Frid.  Fluid vibration in piping systems―A structural mechanics approach. I: Theory , 1989 .

[10]  H. Utsuno,et al.  A Method for the Analytical Prediction of Insertion Loss of a Two-Dimensional Muffler Model Based on the Transfer Matrix Derived from the Boundary Element Method , 1985 .

[11]  Walter Eversman.  A Systematic Procedure for the Analysis of Multiply Branched Acoustic Transmission Lines , 1987 .

[12]  M. J. Crocker,et al.  Analysis of concentric‐tube resonators having unpartitioned cavities , 1978 .

[13]  W. Soedel,et al.  General formulation of four pole parameters for three-dimensional cavities utilizing modal expansion, with special attention to the annular cylinder , 1989 .

[14]  C.Y.R. Cheng,et al.  BOUNDARY ELEMENT ANALYSIS OF MUFFLERS WITH AN IMPROVED METHOD FOR DERIVING THE FOUR-POLE PARAMETERS , 1998 .