The State of the Art: Application of Green Technology in Sustainable Pavement

A wide range of literature on predominant green technologies for sustainable pavements is summarized in this paper. It covers two major aspects: energy harvesting technologies and permeable pavement systems. Fundamental mechanics of energy harvesting techniques and possible designs of energy harvesters are described, with the evaluation of energy conversion efficiency, and advantages and disadvantages. In addition, the designs of permeable pavement systems are discussed, along with their advantages and disadvantages. The latest technical innovations are highlighted. It is found that green technologies are promising for developing more sustainable pavements. Application issues are also pointed out, including construction challenges, durability, and life-cycle cost-benefit assessment. Future research directions are suggested to address practical challenges, such as efficient design, construction challenge, timely maintenance, and life-cycle performance assessment.

[1]  William R. Bryant,et al.  Permeability of Unconsolidated and Consolidated Marine Sediments, Gulf of Mexico , 1975 .

[2]  Wenjuan Sun,et al.  Framework for determining material genome of granular materials: Material characterization and numerical simulation at multiple spatial scales , 2017 .

[3]  Yinghong Qin,et al.  The amplitude and maximum of daily pavement surface temperature increase linearly with solar absorption , 2017 .

[4]  Haocheng Xiong,et al.  Evaluation of pavement response and performance under different scales of APT facilities , 2017 .

[5]  Jaehong Kim,et al.  Implementation of Thermal-Energy-Harvesting Technology on Pavement , 2017 .

[6]  Manfred N. Partl,et al.  How to transform an asphalt concrete pavement into a solar turbine , 2014 .

[7]  陈子光,et al.  Piezoelectric generator based on torsional modes for power harvesting from angular vibrations , 2007 .

[8]  John J. Sansalone,et al.  Permeable Pavement as a Hydraulic and Filtration Interface for Urban Drainage , 2008 .

[9]  Koji Morita,et al.  OPERATIONAL CHARACTERISTICS OF THE GAIA SNOW-MELTING SYSTEM IN NINOHE, IWATE, JAPAN DEVELOPMENT OF A SNOW-MELTING SYSTEM WHICH UTILIZES THERMAL FUNCTIONS OF THE GROUND , 2000 .

[10]  M. Oeser,et al.  Influence of soiling phenomena on air-void microstructure and acoustic performance of porous asphalt pavement , 2018 .

[11]  Jeffrey C. Grossman,et al.  Street-heat: Controlling road temperature via low enthalpy geothermal energy , 2017 .

[12]  Alalea Kia,et al.  Clogging in permeable concrete: A review. , 2017, Journal of environmental management.

[13]  S. El-Tawil,et al.  Electrical and mechanical properties of asphaltic composites containing carbon based fillers , 2017 .

[14]  K. Uchino,et al.  Crystallographic approach to obtain intensive elastic parameters of k33 mode piezoelectric ceramics , 2017 .

[16]  Wei Li,et al.  Harvesting Ambient Environmental Energy for Wireless Sensor Networks: A Survey , 2014, J. Sensors.

[17]  Amir Manbachi,et al.  Development and Application of Piezoelectric Materials for Ultrasound Generation and Detection , 2011 .

[18]  Wenjuan Sun,et al.  Experimental investigation of the relationship between mineral content and aggregate morphological characteristics using the improved FTI system and XRD method , 2017 .

[19]  Jingang Yi,et al.  Tire tread deformation sensor and energy harvester development for smart-tire applications , 2007, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[20]  Mohamed Sonebi,et al.  Investigating the effect of mixture design parameters on pervious concrete by statistical modelling , 2013 .

[21]  Dionysia Kolokotsa,et al.  Development and testing of photovoltaic pavement for heat island mitigation , 2016 .

[22]  K. Uchino,et al.  Piezoelectric Energy Harvesting under High Pre-Stressed Cyclic Vibrations , 2005 .

[23]  Susanne M. Charlesworth,et al.  Renewable energy combined with sustainable drainage: Ground source heat and pervious paving , 2017 .

[24]  Andrew Dawson,et al.  Energy Harvesting from Pavements , 2014 .

[25]  Omkar Deo,et al.  Permeability Reduction in Pervious Concretes due to Clogging: Experiments and Modeling , 2010 .

[26]  Dawei Wang,et al.  Suitability of PoroElastic Road Surface (PERS) for urban roads in cold regions: Mechanical and functional performance assessment , 2017 .

[27]  Jing Yang,et al.  Experimental study on properties of pervious concrete pavement materials , 2003 .

[28]  Atanas A. Popov,et al.  Piezoelectric energy harvesting for tyre pressure measurement applications , 2013 .

[29]  John E. Haddock,et al.  An Introduction to Tire/Pavement Noise of Asphalt Pavement , 2004 .

[30]  Christer Stenmark,et al.  An alternative road construction for stormwater management in cold climates , 1995 .

[31]  Hariyadi,et al.  Enhancing the Performance of Porous Concrete by Utilizing the Pumice Aggregate , 2015 .

[32]  A. Deletic,et al.  Hydraulic performance of biofilter systems for stormwater management : lessons from a field study , 2008 .

[33]  Jari Juuti,et al.  Energy harvesting with a cymbal type piezoelectric transducer from low frequency compression , 2012, Journal of Electroceramics.

[34]  Rajib B. Mallick,et al.  Evaluation of the potential of harvesting heat energy from asphalt pavements , 2011 .

[35]  S. Sathiyamoorthy,et al.  Hybrid Energy Harvesting using Piezoelectric Materials,Automatic Rotational Solar Panel, Vertical Axis Wind Turbine , 2012 .

[36]  Arturo Montoya,et al.  Development and Evaluation of Piezoelectric Prototypes for Roadway Energy Harvesting , 2017 .

[37]  Hao Wang,et al.  Energy harvesting technologies in roadway and bridge for different applications – A comprehensive review , 2018 .

[38]  E. Nnadi,et al.  Geotextile Incorporated Permeable Pavement System as Potential Source of Irrigation Water: Effects of Re‐Used Water on the Soil, Plant Growth and Development , 2014 .

[39]  Wim Van den bergh,et al.  Performance of a pavement solar energy collector: Model development and validation , 2016 .

[40]  Olivier Coussy,et al.  Poromechanics of freezing materials , 2005 .

[41]  Qian Shi,et al.  Identifying the underpin of green and low carbon technology innovation research: A literature review from 1994 to 2010 , 2013 .

[42]  C. L. Abbott,et al.  IN‐SITU HYDRAULIC PERFORMANCE OF A PERMEABLE PAVEMENT SUSTAINABLE URBAN DRAINAGE SYSTEM , 2003 .

[43]  Yudong Hou,et al.  High power density in a piezoelectric energy harvesting ceramic by optimizing the sintering temperature of nanocrystalline powders , 2017 .

[44]  Pablo Pascual-Muñoz,et al.  Influence of pervious pavement systems on heat dissipation from a horizontal geothermal system , 2013 .

[45]  Kai Yang,et al.  Finite element analysis of piezoelectric stack transducer embedded in asphalt pavement , 2015, 2015 Symposium on Piezoelectricity, Acoustic Waves, and Device Applications (SPAWDA).

[46]  Paul K. Wright,et al.  A piezoelectric vibration based generator for wireless electronics , 2004 .

[47]  Na Lu,et al.  Effect of ZnO nanoparticles on thermoelectric properties of cement composite for waste heat harvesting , 2017 .

[48]  Markus Oeser,et al.  Hydraulic and mechanical properties of porous cement-stabilised materials for base courses of PICPs , 2012 .

[49]  M. Santamouris.  Using cool pavements as a mitigation strategy to fight urban heat island—A review of the actual developments , 2013 .

[50]  Arturo Montoya,et al.  Energy harvesting from asphalt pavement roadways vehicle-induced stresses: A feasibility study , 2016 .

[51]  S. Bhowmick,et al.  Harvesting energy from asphalt pavements and reducing the heat island effect , 2009 .

[52]  Hossein Roshani.  Feasibility study of piezoelectric energy harvesting from roadways vehicle-induced stresses , 2016 .

[53]  Arul Arulrajah,et al.  Recycled construction and demolition materials in permeable pavement systems: geotechnical and hydraulic characteristics , 2015 .

[54]  Jiaqi Chen,et al.  Analytical approach for evaluating temperature field of thermal modified asphalt pavement and urban heat island effect , 2017 .

[55]  Rodrigo Escobar,et al.  Performance Analysis of a Hybrid Solar-Geothermal Power Plant in Northern Chile , 2011 .

[56]  A. Schönecker.  Piezoelectric Fiber Composite Fabrication , 2008 .

[57]  Chuan Tian,et al.  Energy harvesting from low frequency applications using piezoelectric materials , 2014 .

[59]  B. Niu,et al.  Investigation of mechanical properties of randomly distributed sisal fibre reinforced soil , 2014 .

[60]  G. Tomasini,et al.  Design of a Wireless Sensor Powered by a Piezoelectric Energy Harvester , 2014 .

[61]  Zhou Jing,et al.  Characterization of moisture vapor diffusion in fine aggregate mixtures using Fickian and non-Fickian models , 2017 .

[62]  John A Rogers,et al.  Conformal piezoelectric energy harvesting and storage from motions of the heart, lung, and diaphragm , 2014, Proceedings of the National Academy of Sciences.

[63]  Hongduo Zhao,et al.  Harvesting energy from asphalt pavement by piezoelectric generator , 2014, Journal of Wuhan University of Technology-Mater. Sci. Ed..

[64]  Miklas Scholz,et al.  Review of permeable pavement systems , 2007 .

[65]  Yacov Y. Haimes,et al.  Managing the risk of terrorism to interdependent infrastructure systems through the dynamic inoperability input–output model , 2006, Syst. Eng..

[66]  Stephen X. Zhang,et al.  Exploring an innovative design for sustainable urban water management and energy conservation , 2013 .

[67]  Elsayed I. Morgan,et al.  An integrated review of factors influencing the perfomance of photovoltaic panels , 2017 .

[68]  Brian D. Davison,et al.  Resilience metrics and measurement methods for transportation infrastructure: the state of the art , 2020 .

[69]  Zhang Qian,et al.  Energy harvesting from solar irradiation in cities using the thermoelectric behavior of carbon fiber reinforced cement composites , 2014 .

[70]  B. Diefenderfer,et al.  Modified dynamic modulus test and customised prediction model of asphalt-treated drainage layer materials for M-E pavement design , 2016 .

[71]  A. Batra,et al.  Energy Harvesting from Pavements Using Pyroelectric Single Crystal and Nano-Composite Based Smart Materials , 2011 .

[72]  Linbing Wang,et al.  Characterization of mortar fracture based on three point bending test and XFEM , 2017, International Journal of Pavement Research and Technology.

[73]  Nils-Erik Wiberg,et al.  Coupled hydro-mechanical wave propagation in road structures , 2005 .

[74]  Gerardo Hurtado Hurtado,et al.  Energy harvesting simulator , 2016, 2016 12th Congreso Internacional de Ingeniería (CONIIN).

[75]  Ann Marie Sastry,et al.  Powering MEMS portable devices—a review of non-regenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems , 2008 .

[76]  Nan Wu,et al.  Energy harvesting in pavement from passing vehicles with piezoelectric composite plate for ice melting , 2016, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[77]  M. Oeser,et al.  Influence of aggregates’ spatial characteristics on air-voids in asphalt mixture , 2018 .

[78]  DuSIN RarusrNovt,et al.  MACEDONITE-LEAD TITANATE : A NBW MINERAL , 2007 .

[79]  Zbigniew Klimont,et al.  Anthropogenic sulfur dioxide emissions: 1850–2005 , 2010 .

[80]  Filippo Ubertini,et al.  Multipurpose experimental characterization of smart nanocomposite cement-based materials for thermal-energy efficiency and strain-sensing capability , 2017 .

[81]  M. Oeser,et al.  Numerical Evaluation on the Filtration and Clogging Behavior of Porous Pavement , 2018 .

[82]  Samer Dessouky,et al.  Harvesting Thermoelectric Energy from Asphalt Pavements , 2017 .

[83]  J. Tao,et al.  Energy harvesting from pavement via polyvinylidene fluoride: hybrid piezo-pyroelectric effects , 2016 .

[84]  Weibin Shen,et al.  Airport Apron Heated Pavement System Operations: Analysis of Energy Consumption, Greenhouse Gas Emissions, and Operating Costs , 2016 .

[85]  Zbigniew Klimont,et al.  The last decade of global anthropogenic sulfur dioxide: 2000–2011 emissions , 2013 .

[86]  Khandaker Anamul Hoque,et al.  A noble model for harvesting energy using piezoelectric material and solar panel: Bangladesh perspective , 2014, 2nd International Conference on Green Energy and Technology.

[87]  Shoudong Huang,et al.  A new crossover approach for solving the multiple travelling salesmen problem using genetic algorithms , 2013, Eur. J. Oper. Res..

[88]  D. Goldstein,et al.  AGGREGATE SIZE AND SEAL PROPERTIES1 , 1997 .

[89]  Wei Zhang,et al.  A prototype IOT based wireless sensor network for traffic information monitoring , 2017 .

[90]  W. D. Martin,et al.  Hydrologic Characterization of an Underdrained Porous Pavement , 2016 .

[91]  Z. Leng,et al.  Effects of Material Composition on Mechanical and Acoustic Performance of PoroElastic Road Surface (PERS) , 2017 .

[92]  A. Moure,et al.  Feasible integration in asphalt of piezoelectric cymbals for vibration energy harvesting , 2016 .

[93]  Haocheng Xiong,et al.  Piezoelectric energy harvester for public roadway: On-site installation and evaluation , 2016 .

[94]  Carl-Eric Hagentoft,et al.  Anti-icing of road surfaces using Hydronic Heating Pavement with low temperature , 2018 .

[95]  W. Keats Wilkie,et al.  An overview of composite actuators with piezoceramic fibers , 2002 .

[96]  Don Berlincourt,et al.  Piezoelectric Crystals and Ceramics , 1971 .

[97]  R. Vogel,et al.  Optimal Location of Infiltration-Based Best Management Practices for Storm Water Management , 2005 .

[98]  Anuj Sharma,et al.  Powering Traffic Intersections with Wind and Solar Energy , 2014 .

[99]  Zhihao Yang,et al.  Design and characterisation of a piezoelectric knee-joint energy harvester with frequency up-conversion through magnetic plucking , 2016 .

[101]  Luis A. Sañudo-Fontaneda,et al.  An evaluation of enhanced geotextile layer in permeable pavement to improve stormwater infiltration and attenuation , 2014 .

[102]  D. Markley,et al.  Energy Harvesting Using a Piezoelectric “Cymbal” Transducer in Dynamic Environment , 2004 .

[103]  Haider Taha,et al.  The potential for air-temperature impact from large-scale deployment of solar photovoltaic arrays in urban areas , 2013 .

[104]  Pragya Sharma,et al.  Solar energy generation potential along national highways , 2013 .

[105]  Kai Liu,et al.  Multi-objective optimization of the design and operation for snow-melting pavement with electric heating pipes , 2017 .

[106]  Adelino Ferreira,et al.  Energy harvesting on road pavements: state of the art , 2016 .

[107]  Andrea Bradford,et al.  Assessing the potential for restoration of surface permeability for permeable pavements through maintenance. , 2013, Water science and technology : a journal of the International Association on Water Pollution Research.

[108]  Rahnuma Rifat Chowdhury,et al.  Electrification of streets of Dhaka city using solar and piezoelectric energy , 2014, 2014 International Conference on Informatics, Electronics & Vision (ICIEV).

[109]  Ashok K. Batra,et al.  Energy harvesting roads via pyroelectric effect: a possible approach , 2011, Defense + Commercial Sensing.

[110]  Yiqiu Tan,et al.  Investigation of anisotropic flow in asphalt mixtures using the X-ray image technique: pore structure effect , 2019 .

[111]  Hyun Jun Jung,et al.  A piezoelectric impact-induced vibration cantilever energy harvester from speed bump with a low-power power management circuit , 2017 .

[112]  Jianxun He,et al.  The Influence of Design Parameters on Stormwater Pollutant Removal in Permeable Pavements , 2016, Water, Air, & Soil Pollution.

[113]  D. Booth,et al.  Long-term stormwater quantity and quality performance of permeable pavement systems. , 2003, Water research.

[114]  Richard M. White,et al.  Piezoelectric cantilever acoustic transducer , 1998 .

[115]  Dawei Wang,et al.  Interface treatment of longitudinal joints for porous asphalt pavement , 2016 .

[116]  Jun Zhao,et al.  Experimental investigation of ice and snow melting process on pavement utilizing geothermal tail water , 2008 .

[117]  A. L. Dawar,et al.  Pyroelectric Materials, Their Properties and Applications , 1982, April 16.

[118]  T. Fujiwara,et al.  NOISE REDUCTION CHARACTERISTICS OF POROUS ELASTIC ROAD SURFACES , 1996 .

[119]  Susan L. Tighe,et al.  Performance modelling of a solar road panel prototype using finite element analysis , 2016 .

[120]  F. Hernández-Olivares,et al.  Fatigue behaviour of recycled tyre rubber-filled concrete and its implications in the design of rigid pavements , 2007 .

[121]  Meng Guo,et al.  A multi-scale approach of Mode I Crack in ettringite , 2017 .

[122]  Qiang Liu,et al.  Performance analyses of a hybrid geothermal–fossil power generation system using low-enthalpy geothermal resources , 2016 .

[123]  Peter Steen Mikkelsen,et al.  SUDS, LID, BMPs, WSUD and more – The evolution and application of terminology surrounding urban drainage , 2015 .

[124]  Nasser Khalili,et al.  A three-phase model for unsaturated soils , 2000 .

[125]  Francesco Calise,et al.  Energy and economic analysis of geothermal–solar trigeneration systems: A case study for a hotel building in Ischia , 2015 .

[126]  Miklas Scholz,et al.  Energy and temperature performance analysis of geothermal (ground source) heat pumps integrated with permeable pavement systems for urban run-off reuse , 2009 .

[127]  Matthew E. Edwards,et al.  Simulation of energy harvesting from roads via pyroelectricity , 2011 .

[128]  Kai Liu,et al.  Energy consumption and utilization rate analysis of automatically snow-melting system in infrastructures by thermal simulation and melting experiments , 2017 .

[129]  Hartmut Ritter,et al.  Utilizing solar power in wireless sensor networks , 2003, 28th Annual IEEE International Conference on Local Computer Networks, 2003. LCN '03. Proceedings..

[130]  C. Turchi,et al.  Solar Field Optical Characterization at Stillwater Geothermal/Solar Hybrid Plant , 2017 .