Improving air quality in high-density cities by understanding the relationship between air pollutant dispersion and urban morphologies

Abstract In high-density megacities, air pollution has a higher impact on public health than cities of lower population density. Apart from higher pollution emissions due to human activities in densely populated street canyons, stagnated air flow due to closely packed tall buildings means lower dispersion potential. The coupled result leads to frequent reports of high air pollution indexes at street-side stations in Hong Kong. High-density urban morphologies need to be carefully designed to lessen the ill effects of high density urban living. This study addresses the knowledge-gap between planning and design principles and air pollution dispersion potentials in high density cities. The air ventilation assessment for projects in high-density Hong Kong is advanced to include air pollutant dispersion issues. The methods in this study are CFD simulation and parametric study. The SST κ–ω model is adopted after balancing the accuracy and computational cost in the comparative study. Urban-scale parametric studies are conducted to clarify the effects of urban permeability and building geometries on air pollution dispersion, for both the outdoor pedestrian environment and the indoor environment in the roadside buildings. Given the finite land resources in high-density cities and the numerous planning and design restrictions for development projects, the effectiveness of mitigation strategies is evaluated to optimize the benefits. A real urban case study is finally conducted to demonstrate that the suggested design principles from the parametric study are feasible in the practical high density urban design.

[1]  Yoshihide Tominaga,et al.  AIJ guidelines for practical applications of CFD to pedestrian wind environment around buildings , 2008 .

[2]  Jong-Jin Baik,et al.  Modeling reactive pollutant dispersion in an urban street canyon , 2007 .

[3]  J. Stedman,et al.  Recent trends and projections of primary NO2 emissions in Europe , 2009 .

[4]  Ryozo Ooka,et al.  CFD analysis of mesoscale climate in the Greater Tokyo area , 1997 .

[5]  Alexis K.H. Lau,et al.  Air ventilation impacts of the "wall effect" resulting from the alignment of high-rise buildings , 2009 .

[6]  Yasunobu Ashie,et al.  Effects of sea breeze on thermal environment as a measure against Tokyo's urban heat island , 2009 .

[7]  Yoshihide Tominaga,et al.  CFD modeling of pollution dispersion in a street canyon: Comparison between LES and RANS , 2011 .

[8]  S. Murakami,et al.  Comparison of various revised k–ε models and LES applied to flow around a high-rise building model with 1:1:2 shape placed within the surface boundary layer , 2008 .

[9]  Shuzo Murakami,et al.  Environmental design of outdoor climate based on CFD , 2006 .

[10]  Ryozo Ooka,et al.  CFD Analysis on Traffic-Induced Air Pollutant Dispersion with Non Isothermal Condition in a Complex Urban Area in Winter , 2006 .

[11]  Chao-Hsin Lin,et al.  Advanced turbulence models for predicting particle transport in enclosed environments , 2012 .

[12]  Timothy R. Oke,et al.  Aerodynamic Properties of Urban Areas Derived from Analysis of Surface Form , 1999 .

[13]  E. Ng.  Policies and technical guidelines for urban planning of high-density cities – air ventilation assessment (AVA) of Hong Kong , 2008, Building and Environment.

[14]  Reginald Storms,et al.  Wind environmental conditions in passages between buildings , 1986 .

[15]  Parham A. Mirzaei,et al.  A procedure to quantify the impact of mitigation techniques on the urban ventilation , 2012 .

[16]  R Rota,et al.  Hazardous gas releases in urban areas: assessment of consequences through CFD modelling. , 2010, Journal of hazardous materials.

[17]  Baruch Givoni,et al.  Man climate and architecture , 1969 .

[18]  Alexis K.H. Lau,et al.  Mesoscale Simulation of Year-to-Year Variation of Wind Power Potential over Southern China , 2009 .

[19]  Riccardo Buccolieri,et al.  Numerical simulation of atmospheric pollutant dispersion in an urban street canyon: Comparison between RANS and LES , 2011 .

[20]  N Künzli,et al.  Public-health impact of outdoor and traffic-related air pollution: a European assessment , 2000, The Lancet.

[21]  T. Stathopoulos,et al.  CFD simulation of the atmospheric boundary layer: wall function problems , 2007 .

[22]  Judith C. Chow,et al.  Emissions of gas- and particle-phase polycyclic aromatic hydrocarbons (PAHs) in the Shing Mun Tunnel, Hong Kong , 2009 .

[23]  F. Menter,et al.  Ten Years of Industrial Experience with the SST Turbulence Model , 2003 .

[24]  Mats Sandberg,et al.  The influence of building height variability on pollutant dispersion and pedestrian ventilation in idealized high-rise urban areas , 2012 .

[25]  Other.  Air Quality in Europe – 2012 report , 2012 .

[26]  Jennifer Richmond-Bryant,et al.  Air pollution retention within a complex of urban street canyons: A two-city comparison , 2012 .

[27]  E. Ng,et al.  Towards planning and practical understanding of the need for meteorological and climatic information in the design of high‐density cities: A case‐based study of Hong Kong , 2012 .

[28]  R. Ooka,et al.  A numerical study of air pollutant dispersion with bimolecular chemical reactions in an urban street canyon using large-eddy simulation , 2012 .

[29]  Hiroaki Kondo,et al.  Numerical analysis of diffusion around a suspended expressway by a multi-scale CFD model , 2005 .

[30]  Bert Brunekreef,et al.  Quantifying urban street configuration for improvements in air pollution models , 2013 .

[31]  Yoshihide Tominaga,et al.  CFD Modeling of Pollution Dispersion in Building Array: Evaluation of turbulent scalar flux modeling in RANS model using LES results , 2012 .

[32]  B. Blocken,et al.  CFD simulation of pollutant dispersion around isolated buildings: on the role of convective and turbulent mass fluxes in the prediction accuracy. , 2011, Journal of hazardous materials.

[33]  Qingyan Chen,et al.  Experimental measurements and numerical simulations of particle transport and distribution in ventilated rooms , 2006 .

[34]  Edward Ng,et al.  Improving the wind environment in high-density cities by understanding urban morphology and surface roughness: A study in Hong Kong , 2011, Landscape and Urban Planning.

[35]  Mats Sandberg,et al.  City breathability and its link to pollutant concentration distribution within urban-like geometries , 2010 .

[36]  Bert Blocken,et al.  CFD simulation of near-field pollutant dispersion on a high-resolution grid : a case study by LES and RANS for a building group in downtown Montreal , 2011 .

[37]  Kit Ming Lam,et al.  Recent progress in CFD modelling of wind field and pollutant transport in street canyons , 2006 .

[38]  K. Pericleous,et al.  Modelling air quality in street canyons : a review , 2003 .

[39]  Edward Ng,et al.  Building porosity for better urban ventilation in high-density cities – A computational parametric study , 2011, Building and Environment.