Bioinspired Robotic Fingers Based on Pneumatic Actuator and 3D Printing of Smart Material

Abstract In this article, we have proposed a novel robotic finger design principle aimed to address two challenges in soft pneumatic grippers—the controllability of the stiffness and the controllability of the bending position. The proposed finger design is composed of a 3D printed multimaterial substrate and a soft pneumatic actuator. The substrate has four polylactic acid (PLA) segments interlocked with three shape memory polymer (SMP) joints, inspired by bones and joints in human fingers. By controlling the thermal energy of an SMP joint, the stiffness of the joints is modulated due to the dramatic change in SMP elastic modulus around its glass transition temperature (Tg). When SMP joints are heated above Tg, they exhibit very small stiffness, allowing the finger to easily bend around the SMP joints if the attached soft actuator is actuated. When there is no force from the soft actuator, shape recovery stress in SMP contributes to the finger's shape restoration. Since each joint's rotation can be indiv...

[1]  Hisaaki Tobushi,et al.  Thermomechanical properties in a thin film of shape memory polymer of polyurethane series , 1996 .

[2]  Robert J. Bernhard,et al.  Controlled continuous tuning of an adaptively tunable vibration absorber incorporating shape memory alloys , 2000, Smart Structures.

[3]  Hisaaki Tobushi,et al.  Thermomechanical constitutive model of shape memory polymer , 2001 .

[4]  Ian D. Walker,et al.  Design and implementation of a multi-section continuum robot: Air-Octor , 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[5]  C Majidi,et al.  Effective elastic modulus of isolated gecko setal arrays , 2006, Journal of Experimental Biology.

[6]  Patrick T. Mather,et al.  Review of progress in shape-memory polymers , 2007 .

[7]  H. Yano,et al.  Cellulose nanofiber-reinforced polylactic acid , 2008 .

[8]  R. Wood,et al.  Tunable elastic stiffness with microconfined magnetorheological domains at low magnetic field , 2010 .

[9]  Jian Sun,et al.  Variable stiffness property study on shape memory polymer composite tube , 2012 .

[10]  Heinrich M. Jaeger,et al.  A Positive Pressure Universal Gripper Based on the Jamming of Granular Material , 2012, IEEE Transactions on Robotics.

[11]  Ali Sadeghi,et al.  Innovative soft robots based on electro-rheological fluids , 2012, 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[12]  Paolo Dario,et al.  Soft Robot Arm Inspired by the Octopus , 2012, Adv. Robotics.

[13]  Cecilia Laschi,et al.  Soft robotics: a bioinspired evolution in robotics. , 2013, Trends in biotechnology.

[14]  Toshiro Noritsugu,et al.  Pneumatic artificial rubber muscle using shape-memory polymer sheet with embedded electrical heating wire , 2014 .

[15]  MajidiCarmel,et al.  Soft Robotics: A Perspective—Current Trends and Prospects for the Future , 2014 .

[16]  Dario Floreano,et al.  Variable stiffness actuator for soft robotics using dielectric elastomer and low-melting-point alloy , 2015, 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[17]  D. Rus,et al.  Design, fabrication and control of soft robots , 2015, Nature.

[18]  Robert J. Wood,et al.  Soft robotic glove for combined assistance and at-home rehabilitation , 2015, Robotics Auton. Syst..

[19]  Rebecca K. Kramer,et al.  Soft Material Characterization for Robotic Applications , 2015 .

[20]  Amir Firouzeh,et al.  Soft pneumatic actuator with adjustable stiffness layers for Multi-DoF Actuation , 2015, 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[21]  Carmel Majidi,et al.  Rigidity-tuning conductive elastomer , 2015 .

[22]  Robert J. Wood,et al.  Soft Robotic Grippers for Biological Sampling on Deep Reefs , 2016, Soft robotics.

[23]  Mariangela Manti,et al.  Stiffening in Soft Robotics: A Review of the State of the Art , 2016, IEEE Robotics & Automation Magazine.

[24]  Yonghua Chen,et al.  Novel Design and Three-Dimensional Printing of Variable Stiffness Robotic Grippers , 2016 .

[25]  Yang Yang,et al.  3D printing of variable stiffness hyper-redundant robotic arm , 2016, 2016 IEEE International Conference on Robotics and Automation (ICRA).

[26]  Yang Yang,et al.  A soft robotic spine with tunable stiffness based on integrated ball joint and particle jamming , 2016 .

[27]  Cagdas D. Onal,et al.  A composite soft bending actuation module with integrated curvature sensing , 2016, 2016 IEEE International Conference on Robotics and Automation (ICRA).

[28]  Yang Yang,et al.  3D printing of shape memory polymer for functional part fabrication , 2016 .

[29]  Dmitry Berenson,et al.  Improving Soft Pneumatic Actuator fingers through integration of soft sensors, position and force control, and rigid fingernails , 2016, 2016 IEEE International Conference on Robotics and Automation (ICRA).