The use of FTIR mapping to assess phase distribution in mixed and recycled WEEE plastics

Abstract Attenuated total internal reflection FTIR mapping was used to examine the coarse microscopic two-phase structure seen with some blended and recycled polymers. The blends studied were virgin and recycled ABS, HIPS and polycarbonate, typical of waste electrical and electronic plastics. The method was compared to optical microscopy both before and after etching with chromic acid. It was found that while optical microscopy showed up phase separation on a scale of tens of microns, the FTIR mapping allowed compositional details to be investigated. The phase structure could be quantified by using the standard deviation of band ratios and this correlated well with mechanical performance. The effects of processing method were more significant than whether material was recycled or not. Longer, less intensive processing produced more phase separation than shorter more intensive processing.

[1]  D. R. Paul,et al.  Fracture characterization of PC/ABS blends: effect of reactive compatibilization, ABS type and rubber concentration , 1999 .

[2]  B. Patterson,et al.  Attenuated Total Internal Reflection Infrared Microspectroscopic Imaging Using a Large-Radius Germanium Internal Reflection Element and a Linear Array Detector , 2006, Applied spectroscopy.

[3]  Curtis Marcott,et al.  Infrared Microspectroscopic Imaging Using a Large Radius Germanium Internal Reflection Element and a Focal Plane Array Detector , 2007, Applied spectroscopy.

[4]  G. N. Mathur,et al.  Effect of Rubber Content of ABS on Properties of PC/ABS Blends. I. Rheological, Mechanical, and Thermal Properties , 2005 .

[5]  Rafael Balart,et al.  Recycling of ABS and PC from electrical and electronic waste. Effect of miscibility and previous degradation on final performance of industrial blends , 2005 .

[6]  M. Khan,et al.  Rheological and mechanical properties of ABS/PC blends , 2005 .

[7]  Andre J. Sommer,et al.  Attenuated Total Internal Reflection Infrared Mapping Microspectroscopy of Soft Materials , 2000 .

[9]  Mingyao Zhang,et al.  Influence of blend composition on the mechanical properties and morphology of PC/ASA/SAN ternary blends , 2009 .

[10]  L. Pessan,et al.  Effects of processing conditions on the phase morphology of PC/ABS polymer blends , 1998 .

[11]  M. Šlouf,et al.  Increasing recyclability of PC, ABS and PMMA: Morphology and fracture behavior of binary and ternary blends , 2008 .

[12]  Hangquan Li,et al.  Recycling of polycarbonate by blending with maleic anhydride grafted ABS , 2004 .

[13]  Rocco Mazzeo,et al.  Attenuated Total Reflection-Fourier transform infrared microspectroscopic mapping for the characterisation of paint cross-sections. , 2007, Analytica chimica acta.

[14]  Ku-Feng Yang,et al.  Effects of viscosity ratio and compatibilizers on the morphology and mechanical properties of polycarbonate/acrylonitrile-butadiene-styrene blends , 1999 .

[15]  Xiaodong Liu,et al.  Recycling of blends of acrylonitrile–butadiene–styrene (ABS) and polyamide , 2002 .

[16]  J. Arnold,et al.  Recycling of acrylonitrile–butadiene–styrene and high‐impact polystyrene from waste computer equipment , 2002 .

[17]  Xiaodong Liu,et al.  Recycling of ABS and ABS/PC blends , 1999 .

[18]  Juan Carlos Cortés López,et al.  Kinetic analysis of thermal degradation of recycled polycarbonate/acrylonitrile–butadiene–styrene mixtures from waste electric and electronic equipment , 2006 .

[19]  Rohit Bhargava,et al.  Time-Resolved Fourier Transform Infrared Spectroscopic Imaging , 2003, Applied spectroscopy.

[20]  J. Arnold,et al.  Void formation due to gas evolution during the recycling of Acrylonitrile–Butadiene–Styrene copolymer (ABS) from waste electrical and electronic equipment (WEEE) , 2009 .

[21]  S. Kazarian,et al.  Combined Application of Imaging Methods for the Characterization of a Polymer Blend , 2002 .

[22]  Keith Smith,et al.  Reprocessing Acrylonitrile-Butadiene-Styrene Plastics: Structure-Property Relationships , 2007 .

[23]  Jack L. Koenig,et al.  Comparison of the FT-IR Mapping and Imaging Techniques Applied to Polymeric Systems , 2000 .