Fabrication of AuNPs/MWCNTS/Chitosan Nanocomposite for the Electrochemical Aptasensing of Cadmium in Water

Cadmium (Cd2+) is one of the most toxic heavy metals causing serious health problems; thus, designing accurate analytical methods for monitoring such pollutants is highly urgent. Herein, we report a label-free electrochemical aptasensor for cadmium detection in water. For this, a nanocomposite combining the advantages of gold nanoparticles (AuNPs), carbon nanotubes (CNTs) and chitosan (Cs) was constructed and used as immobilization support for the cadmium aptamer. First, the surface of a glassy carbon electrode (GCE) was modified with CNTs-CS. Then, AuNPs were deposited on CNTs-CS/GCE using chrono-amperometry. Finally, the immobilization of the amino-modified Cd-aptamer was achieved via glutaraldehyde cross-linking. The different synthesis steps of the AuNPs/CNTs/CS nano assembly were characterized by cyclic voltammetry (CV). Electrochemical impedance spectroscopy (EIS) was employed for cadmium determination. The proposed biosensor exhibited excellent performances for cadmium detection at a low applied potential (−0.5 V) with a high sensitivity (1.2 KΩ·M−1), a detection limit of 0.02 pM and a wide linear range (10−13–10−4 M). Moreover, the aptasensor showed a good selectivity against the interfering ions: Pb2+; Hg2+ and Zn2+. Our electrochemical biosensor provides a simple and sensitive approach for Cd2+ detection in aqueous solutions, with promising applications in the monitoring of trace amounts of heavy metals in real samples.

[1]  G. Ozolins,et al.  WHO guidelines for drinking-water quality. , 1984, WHO chronicle.

[2]  R. Yuan,et al.  An ECL sensor for dopamine using reduced graphene oxide/multiwall carbon nanotubes/gold nanoparticles , 2014 .

[3]  Bao-Shan He,et al.  Electrochemical aptasensor based on aptamer-complimentary strand conjugate and thionine for sensitive detection of tetracycline with multi-walled carbon nanotubes and gold nanoparticles amplification , 2018 .

[4]  C. Soldano Hybrid metal-based carbon nanotubes: Novel platform for multifunctional applications , 2015 .

[5]  William Putzbach,et al.  Immobilization Techniques in the Fabrication of Nanomaterial-Based Electrochemical Biosensors: A Review , 2013, Sensors.

[6]  Lumei Wang,et al.  Selection of a DNA aptamer for cadmium detection based on cationic polymer mediated aggregation of gold nanoparticles. , 2014, The Analyst.

[7]  Vamsi K Yadavalli,et al.  Surface immobilization of DNA aptamers for biosensing and protein interaction analysis. , 2011, Biosensors & bioelectronics.

[8]  Y. Tsai,et al.  Immobilization of lactate dehydrogenase within multiwalled carbon nanotube-chitosan nanocomposite for application to lactate biosensors , 2007 .

[9]  Xia Sun,et al.  Aptasensor based on the synergistic contributions of chitosan-gold nanoparticles, graphene-gold nanoparticles and multi-walled carbon nanotubes-cobalt phthalocyanine nanocomposites for kanamycin detection. , 2014, The Analyst.

[10]  Meral Yüce,et al.  Current Perspectives on Aptamers as Diagnostic Tools and Therapeutic Agents , 2020, Pharmaceutics.

[11]  Yunxia Luan,et al.  A Label-Free Aptamer-Based Fluorescent Assay for Cadmium Detection , 2016 .

[12]  Lao Juan,et al.  Development and Validation of a Scale for Measuring Instructors' Attitudes toward Concept-Based or Reform-Oriented Teaching of Introductory Statistics in the Health and Behavioral Sciences , 2010, 1007.3219.

[13]  M. Berezovski,et al.  Switchable aptamers for biosensing and bioseparation of viruses (SwAps-V). , 2015, Biosensors & bioelectronics.

[14]  J. Anupriya,et al.  Facile Hydrothermal Synthesis of Cubic Zinc Ferrite Nanoparticles for Electrochemical Detection of Anti- inflammatory Drug Nimesulide in Biological and Pharmaceutical Sample , 2021, International Journal of Electrochemical Science.

[15]  Xinhua Xu,et al.  Molecularly imprinted polymer/graphene oxide modified glassy carbon electrode for selective detection of sulfanilamide , 2017 .

[16]  F. Rius,et al.  Potentiometric sensors using cotton yarns, carbon nanotubes and polymeric membranes. , 2013, The Analyst.

[17]  N. Jaffrezic‐Renault,et al.  A new thin film modified glassy carbon electrode based on melaminium chloride pentachlorocuprate(II) for selective determination of nitrate in water , 2019, Monatshefte für Chemie - Chemical Monthly.

[18]  Kasra Saeedfar,et al.  A DNA biosensor based on gold nanoparticle decorated on carboxylated multi-walled carbon nanotubes for gender determination of Arowana fish. , 2017, Bioelectrochemistry.

[19]  Yingfu Li,et al.  In Vitro Selection of Circular DNA Aptamers for Biosensing Applications. , 2019, Angewandte Chemie.

[20]  Mahmoud Nasrollahzadeh,et al.  Applications of Nanotechnology in Daily Life , 2019, Interface Science and Technology.

[21]  Chih-Ching Huang,et al.  Oligonucleotide-based fluorescence probe for sensitive and selective detection of mercury(II) in aqueous solution. , 2008, Analytical chemistry.

[22]  Qing Lv,et al.  Disposable paper-based electrochemical sensor based on stacked gold nanoparticles supported carbon nanotubes for the determination of bisphenol A , 2016 .

[23]  R. E. Gyurcsányi,et al.  Aptamers against Immunoglobulins: Design, Selection and Bioanalytical Applications , 2020, International journal of molecular sciences.

[24]  Chun-Xia Tang,et al.  A "turn-on" electrochemiluminescent biosensor for detecting Hg2+ at femtomole level based on the intercalation of Ru(phen)3(2+) into ds-DNA. , 2010, Chemical communications.

[25]  Kelley J. Rountree,et al.  A Practical Beginner’s Guide to Cyclic Voltammetry , 2017 .

[26]  Zheng Wei,et al.  Determination of Ursolic Acid in Extracts From Ligustri lucidum Fruit Using an Electrochemical Method , 2020, Frontiers in Chemistry.

[27]  A. Power,et al.  Carbon nanomaterials and their application to electrochemical sensors: a review , 2017 .

[28]  M. Emara,et al.  Development of gold nanoparticles biosensor for ultrasensitive diagnosis of foot and mouth disease virus , 2018, Journal of Nanobiotechnology.

[29]  M. Yusoff,et al.  Recent uses of carbon nanotubes & gold nanoparticles in electrochemistry with application in biosensing: A review. , 2018, Biosensors & bioelectronics.

[30]  Xiaojun Cai,et al.  A layer-by-layer assembled and carbon nanotubes/gold nanoparticles-based bienzyme biosensor for cholesterol detection , 2013 .

[31]  Xiaoyong Zou,et al.  A novel glucose biosensor based on immobilization of glucose oxidase in chitosan on a glassy carbon electrode modified with gold-platinum alloy nanoparticles/multiwall carbon nanotubes. , 2007, Analytical biochemistry.

[32]  Dongchu Chen,et al.  Applications of Gold Nanoparticles in Non-Optical Biosensors , 2018, Nanomaterials.

[33]  S. Mitra,et al.  Microwave-induced rapid chemical functionalization of single-walled carbon nanotubes , 2005 .

[34]  Mohsen Golabi,et al.  Diazonium-based impedimetric aptasensor for the rapid label-free detection of Salmonella typhimurium in food sample. , 2016, Biosensors & bioelectronics.

[35]  Nor Azah Yusof,et al.  Construction of an Electrochemical Sensor Based on Carbon Nanotubes/Gold Nanoparticles for Trace Determination of Amoxicillin in Bovine Milk , 2016, Sensors.

[36]  Feng Gao,et al.  A high-performance aptasensor for mercury(II) based on the formation of a unique ternary structure of aptamer-Hg(2+)-neutral red. , 2014, Chemical communications.

[37]  A. Abbasi,et al.  A novel impedimetric aptasensor, based on functionalized carbon nanotubes and prussian blue as labels. , 2016, Analytical biochemistry.

[38]  Baoshan He,et al.  Aptamer-based thin film gold electrode modified with gold nanoparticles and carboxylated multi-walled carbon nanotubes for detecting oxytetracycline in chicken samples. , 2019, Food chemistry.

[39]  J. Raoof,et al.  Label-free and sensitive aptasensor based on dendritic gold nanostructures on functionalized SBA-15 for determination of chloramphenicol , 2016, Analytical and Bioanalytical Chemistry.

[40]  Guo-yan Liu,et al.  A novel amperometric sensor based on screen-printed electrode modified with multi-walled carbon nanotubes and molecularly imprinted membrane for rapid determination of ractopamine in pig urine , 2012 .

[41]  O. Crosby,et al.  nanotubes , 2020, Catalysis from A to Z.

[42]  E. Morallón,et al.  Study on electroactive and electrocatalytic surfaces of single walled carbon nanotube-modified electrodes , 2011 .

[43]  Zeynep Altintas,et al.  Biosensors and nanotechnology : applications in health care diagnostics , 2018 .

[44]  Huangxian Ju,et al.  Signal amplification using functional nanomaterials for biosensing. , 2012, Chemical Society reviews.

[45]  Tiantian Zhang,et al.  Nucleic Acid Aptamers: An Emerging Tool for Biotechnology and Biomedical Sensing , 2015, Sensors.

[46]  T. Scheper,et al.  Aptamer-modified nanomaterials: principles and applications , 2017 .

[47]  A. Turner Cadmium pigments in consumer products and their health risks. , 2019, The Science of the total environment.

[48]  A. Abdelghani,et al.  Electrical Characterization of a Thiol SAM on Gold as a First Step for the Fabrication of Immunosensors based on a Quartz Crystal Microbalance , 2004, Sensors (Basel, Switzerland).

[49]  J. Marty,et al.  Development of a label-free electrochemical aptasensor based on diazonium electrodeposition: Application to cadmium detection in water. , 2020, Analytical biochemistry.