The polarization behavior of the anode in a microbial fuel cell

Abstract Microbial fuel cell (MFC) systems are unique electrochemical devices that employ the catalytic action of bacteria to drive the oxidation of organic compounds. These systems have been suggested as renewable energy sources for small remote devices; however, questions remain about how MFCs can be efficiently optimized for this purpose. Several electrochemical techniques have been employed in this study to elucidate the limiting factors in power production by MFCs. Impedance spectra were collected for the anode and cathode at their open-circuit potential (OCP) before and after all other electrochemical tests. Cell voltage–current curves were obtained using a potential sweep technique and used to determine the maximum power available from the system. Potentiodynamic polarization in two different potential regions was used to determine the exchange current for the reaction occurring at the anode at its OCP and to explore the polarization behavior of the anode and the cathode in a wide potential range. Cyclic voltammetry was used to evaluate the redox activity of the anode. These techniques used in combination showed that the microorganism Shewanella oneidensis MR-1 is solely responsible for the observed decrease of the OCP of the anode, the increased rate of oxidation of lactate, the larger cell voltage and the increased maximum power output of the MFC.

[1]  W. Verstraete,et al.  Biofuel Cells Select for Microbial Consortia That Self-Mediate Electron Transfer , 2004, Applied and Environmental Microbiology.

[2]  F. Harnisch,et al.  Challenges and constraints of using oxygen cathodes in microbial fuel cells. , 2006, Environmental science & technology.

[3]  Eun Jeong Cho,et al.  Optimization of the biological component of a bioelectrochemical cell. , 2007, Bioelectrochemistry.

[4]  B. Min,et al.  Electricity generation using membrane and salt bridge microbial fuel cells. , 2005, Water research.

[5]  U. Schröder,et al.  A generation of microbial fuel cells with current outputs boosted by more than one order of magnitude. , 2003, Angewandte Chemie.

[6]  Sheela Berchmans,et al.  Direct electron transfer with yeast cells and construction of a mediatorless microbial fuel cell. , 2007, Biosensors & bioelectronics.

[7]  D. Park,et al.  Electricity Generation in Microbial Fuel Cells Using Neutral Red as an Electronophore , 2000, Applied and Environmental Microbiology.

[8]  R. Staehle,et al.  Advances in Corrosion Science and Technology , 1972 .

[9]  D. Park,et al.  Improved fuel cell and electrode designs for producing electricity from microbial degradation. , 2003, Biotechnology and bioengineering.

[10]  P. Marcus,et al.  Analytical methods in corrosion science and engineering , 2005 .

[11]  Zhen He,et al.  An upflow microbial fuel cell with an interior cathode: assessment of the internal resistance by impedance spectroscopy. , 2006, Environmental science & technology.

[12]  Byung Hong Kim,et al.  A mediator-less microbial fuel cell using a metal reducing bacterium, Shewanella putrefaciens , 2002 .

[13]  Florian Mansfeld,et al.  Tafel slopes and corrosion rates obtained in the pre-Tafel region of polarization curves , 2005 .

[14]  Anna Obraztsova,et al.  Current Production and Metal Oxide Reduction by Shewanella oneidensis MR-1 Wild Type and Mutants , 2007, Applied and Environmental Microbiology.