Chemiresistive gas sensor based on Mo0.5W0.5S2 alloy nanoparticles with good selectivity and ppb-level limit of detection to ammonia

[1]  D. Late,et al.  Room-temperature highly sensitive and selective NH3 gas sensor using vertically aligned WS2 nanosheets , 2022, Nanotechnology.

[2]  N. Bârsan,et al.  Density Functional Investigation on α-MoO3 (100): Amines Adsorption and Surface Chemistry. , 2022, ACS sensors.

[3]  D. Zeng,et al.  Development of flexible paper substrate sensor based on 2D WS2 with S defects for room-temperature NH3 Gas Sensing , 2021, Applied Surface Science.

[4]  Wen Chen,et al.  Berlin Green Framework-Based Gas Sensor for Room-Temperature and High-Selectivity Detection of Ammonia , 2021, Nano-micro letters.

[5]  Y. Hao,et al.  Hybridized 1T/2H-MoS2/graphene fishnet tube for high-performance on-chip integrated micro-systems comprising supercapacitors and gas sensors , 2020, Nano Research.

[6]  U. Sarkar,et al.  MoSe2 Crystalline Nanosheets for Room-Temperature Ammonia Sensing , 2020 .

[7]  Wen Chen,et al.  Recent advances in 0D nanostructure-functionalized low-dimensional nanomaterials for chemiresistive gas sensors , 2020 .

[8]  Dongyuan Zhao,et al.  Synthesis of orthogonally assembled 3D cross-stacked metal oxide semiconducting nanowires , 2019, Nature Materials.

[9]  Zhihua Zhou,et al.  Ultrasensitive room temperature NO2 sensors based on liquid phase exfoliated WSe2 nanosheets , 2019 .

[10]  Ho Won Jang,et al.  Chemoresistive materials for electronic nose: Progress, perspectives, and challenges , 2019, InfoMat.

[11]  G. Lorite,et al.  WS2 and MoS2 thin film gas sensors with high response to NH3 in air at low temperature , 2019, Nanotechnology.

[12]  K. N. Uttam,et al.  Facile synthesis of molybdenum disulfide (MoS2) quantum dots and its application in humidity sensing , 2019, Nanotechnology.

[13]  Wen Chen,et al.  Acidic Site-Assisted Ammonia Sensing of Novel CuSbS2 Quantum Dots/Reduced Graphene Oxide Composites with an Ultralow Detection Limit at Room Temperature. , 2019, ACS applied materials & interfaces.

[14]  S. Dou,et al.  Engineering additional edge sites on molybdenum dichalcogenides toward accelerated alkaline hydrogen evolution kinetics. , 2019, Nanoscale.

[15]  Sangyoon Lee,et al.  High-Performance Gas Sensor Using a Large-Area WS2 xSe2-2 x Alloy for Low-Power Operation Wearable Applications. , 2018, ACS applied materials & interfaces.

[16]  Ho Won Jang,et al.  Synthesis of Numerous Edge Sites in MoS2 via SiO2 Nanorods Platform for Highly Sensitive Gas Sensor. , 2018, ACS applied materials & interfaces.

[17]  Jeongyong Kim,et al.  Composition-Tunable Synthesis of Large-Scale Mo1- xW xS2 Alloys with Enhanced Photoluminescence. , 2018, ACS nano.

[18]  S. Naseem,et al.  Ammonia production in poultry houses can affect health of humans, birds, and the environment—techniques for its reduction during poultry production , 2018, Environmental Science and Pollution Research.

[19]  Rahul Kumar,et al.  Photoactivated Mixed In-Plane and Edge-Enriched p-Type MoS2 Flake-Based NO2 Sensor Working at Room Temperature. , 2018, ACS sensors.

[20]  Wen Chen,et al.  ppb level ammonia detection of 3-D PbS quantum dots/reduced graphene oxide nanococoons at room temperature and Schottky barrier modulated behavior , 2018 .

[21]  C. Xie,et al.  Effect of layer number on recovery rate of WS2 nanosheets for ammonia detection at room temperature , 2017 .

[22]  Guowei Yang,et al.  Centimeter-Scale Deposition of Mo0.5W0.5Se2 Alloy Film for High-Performance Photodetectors on Versatile Substrates. , 2017, ACS applied materials & interfaces.

[23]  Jing Wang,et al.  WS2 nanoflakes based selective ammonia sensors at room temperature , 2017 .

[24]  Sungjoo Lee,et al.  A homogeneous atomic layer MoS2(1-x)Se2x alloy prepared by low-pressure chemical vapor deposition, and its properties. , 2017, Nanoscale.

[25]  Haoran Wang,et al.  Highly sensitive and selective ammonia gas sensors based on PbS quantum dots/TiO2 nanotube arrays at room temperature , 2016 .

[26]  Jieun Yang,et al.  Recent Strategies for Improving the Catalytic Activity of 2D TMD Nanosheets Toward the Hydrogen Evolution Reaction , 2016, Advanced materials.

[27]  Bo Chen,et al.  Preparation of Single-Layer MoS(2x)Se2(1-x) and Mo(x)W(1-x)S2 Nanosheets with High-Concentration Metallic 1T Phase. , 2016, Small.

[28]  R. Yu,et al.  Synthesis of WS2xSe2-2x Alloy Nanosheets with Composition-Tunable Electronic Properties. , 2016, Nano letters.

[29]  Jihan Kim,et al.  Highly Enhanced Gas Adsorption Properties in Vertically Aligned MoS2 Layers. , 2015, ACS nano.

[30]  G. Ryu,et al.  Controllable synthesis of molybdenum tungsten disulfide alloy for vertically composition-controlled multilayer , 2015, Nature Communications.

[31]  Yanguang Li,et al.  Ultrathin MoS2(1–x)Se2x Alloy Nanoflakes For Electrocatalytic Hydrogen Evolution Reaction , 2015 .

[32]  Thomas Doneux,et al.  Single-layer MoSe2 based NH3 gas sensor , 2014 .

[33]  D. Mukherjee,et al.  Active guests in the MoS2/MoSe2 host lattice: efficient hydrogen evolution using few-layer alloys of MoS(2(1-x))Se(2x). , 2014, Nanoscale.

[34]  Jr-hau He,et al.  Band gap-tunable molybdenum sulfide selenide monolayer alloy. , 2014, Small.

[35]  Yiming Zhu,et al.  Two-dimensional molybdenum tungsten diselenide alloys: photoluminescence, Raman scattering, and electrical transport. , 2014, ACS nano.

[36]  Yiming Zhu,et al.  Growth of Large‐Area 2D MoS2(1‐x)Se2x Semiconductor Alloys , 2014, Advanced materials.

[37]  Dongxiang Zhou,et al.  Physically Flexible, Rapid‐Response Gas Sensor Based on Colloidal Quantum Dot Solids , 2014, Advanced materials.

[38]  Yiming Zhu,et al.  Composition-dependent Raman modes of Mo(1-x)W(x)S2 monolayer alloys. , 2014, Nanoscale.

[39]  P. Ajayan,et al.  Band gap engineering and layer-by-layer mapping of selenium-doped molybdenum disulfide. , 2014, Nano letters.

[40]  Dong Wang,et al.  Tunable band gap photoluminescence from atomically thin transition-metal dichalcogenide alloys. , 2013, ACS nano.

[41]  R. K. Bedi,et al.  Room-temperature ammonia sensor based on cationic surfactant-assisted nanocrystalline CuO. , 2010, ACS applied materials & interfaces.

[42]  Luca Francioso,et al.  Synthesis and Gas Sensing Properties of ZnO Quantum Dots , 2010 .

[43]  Y. Mortazavi,et al.  Low temperature CO and CH4 dual selective gas sensor using SnO2 quantum dots prepared by sonochemical method , 2010 .

[44]  Md. Hamidur Rahman,et al.  Exposure to Ammonia and Acute Respiratory Effects in a Urea Fertilizer Factory , 2007, International journal of occupational and environmental health.

[45]  T. Troczynski,et al.  A resistive gas sensor based on undoped p-type anatase , 2005 .

[46]  O. Toft Sørensen,et al.  Oxygen sensors based on semiconducting metal oxides: an overview , 2000 .

[47]  Chao-Nan Xu,et al.  Grain size effects on gas sensitivity of porous SnO2-based elements , 1991 .

[48]  C. Bittencourt,et al.  Controlled growth of 3D assemblies of edge enriched multilayer MoS2 nanosheets for dually selective NH3 and NO2 gas sensors , 2022, Journal of Materials Chemistry C.

[49]  Tay-Rong Chang,et al.  Metal–Semiconductor Phase‐Transition in WSe2(1‐x)Te2x Monolayer , 2017, Advanced materials.