Energy band engineering for photoelectrochemical etching of GaN/InGaN heterostructures

Photoelectrochemical (PEC) etching is a rapid and inexpensive means of etching GaN, InGaN, and related materials for micro-electro-mechanical systems (MEMS) applications. In this work, we show that bandgap engineering of GaN/InGaN heterostructures can be used to exert substantial control over PEC etching and achieve strain-free cantilevers. A single, 200-nm thick layer InGaN was selectively etched using bandgap-selective PEC etch. We show that the use of highly doped guard layers to confine photogenerated holes uniformly across the InGaN layer enables a uniform, fast, and effective PEC etch. This approach enables complete uniform etching using PEC and could enable many optical and MEMS devices.

[1]  I. Adesida,et al.  Gallium nitride whiskers formed by selective photoenhanced wet etching of dislocations , 1998 .

[2]  S. Denbaars,et al.  Removal of thick (>100nm) InGaN layers for optical devices using band-gap-selective photoelectrochemical etching , 2004 .

[3]  Jaehoon Kim,et al.  AlGaN membrane grating reflector , 2009 .

[4]  S. Denbaars,et al.  Backside-illuminated photoelectrochemical etching for the fabrication of deeply undercut GaN structures , 2000 .

[5]  L. Coldren,et al.  Development of selective lateral photoelectrochemical etching of InGaN/GaN for lift-off applications , 2001 .

[6]  Yean-Woei Kiang,et al.  A GaN photonic crystal membrane laser. , 2011, Nanotechnology.

[7]  Noel C. MacDonald,et al.  Photoelectrochemical undercut etching for fabrication of GaN microelectromechanical systems , 2001 .

[8]  L. Eric Cross,et al.  Tip Deflection and Blocking Force of Soft PZT‐Based Cantilever RAINBOW Actuators , 2004 .

[9]  I. Adesida,et al.  Broad-area photoelectrochemical etching of GaN , 1997 .

[10]  Ilesanmi Adesida,et al.  Dopant-selective photoenhanced wet etching of GaN , 1998 .

[11]  P. Fay,et al.  Etch rate and surface morphology control in photoelectrochemical etching of GaN , 2004 .

[12]  Fabrication of GaN suspended microstructures , 2001 .

[13]  S. Ringel,et al.  Growth model for plasma-assisted molecular beam epitaxy of N-polar and Ga-polar InxGa1−xN , 2011 .

[14]  P. Fay,et al.  Bias-enhanced lateral photoelectrochemical etching of GaN for the fabrication of undercut micromachined system structures , 2006 .