The Adaptive Backstepping Control of Permanent Magnet Synchronous Motor Supplied by Current Source Inverter

The sensorless control system of permanent magnet synchronous motor (PMSM) fed by current source inverter is presented in this paper. The adaptive backstepping control system and the backstepping speed observer are presented. The control systems are based on multiscalar variables. The control variables are dc-link voltage and the output current vector pulsation. The control system was named the voltage control system because of the fact that the first control variable is voltage in dc-link. The machine inverter is treated as a commutator. It works with constant modulation index. The proposed control system is robust on mechanical and electromagnetical parameters of the motor. The adaptive estimator of the stator resistance is introduced. Such an approach to control of the PMSM motor gives better performance. It is robust to dynamic uncertainties and does not require knowledge of the system parameters. The mathematical equation was introduced. Simple method limitation of control variables is explained. The reference variables must be limited to a constant or various value if the motor system has to be used in the industrial applications. The simulation and experimental test are shown.

[1]  J. Zhou,et al.  Adaptive backstepping speed controller design for a permanent magnet synchronous motor , 2002 .

[2]  Isao Takahashi,et al.  Discussion of "A super high speed PM motor drive system by a quasi-current source inverter" [and reply] , 1995 .

[3]  Bin Wu,et al.  Input Power Factor Compensation for High-Power CSC Fed PMSM Drive Using d -Axis Stator Current Control , 2012, IEEE Transactions on Industrial Electronics.

[4]  Arkadiusz Lewicki,et al.  Voltage multiscalar control of induction machine supplied by current source converter , 2010, 2010 IEEE International Symposium on Industrial Electronics.

[5]  Sungho Jung,et al.  A current controller design for current source inverter-fed PMSM drive system , 2011, 8th International Conference on Power Electronics - ECCE Asia.

[6]  O. A. Mohammed,et al.  Development of a grid-connected wind generation system utilizing high frequency-based three-phase semicontrolled rectifier-current source inverter , 2011, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[7]  Bin Wu,et al.  A Current-Source-Converter-Based High-Power High-Speed PMSM Drive With 420-Hz Switching Frequency , 2012, IEEE Transactions on Industrial Electronics.

[8]  Bin Wu,et al.  Power factor compensation for CSC-fed PMSM drive using d-axis stator current control , 2011, 2011 IEEE International Electric Machines & Drives Conference (IEMDC).

[9]  M.N. Uddin,et al.  Online Parameter-Estimation-Based Speed Control of PM AC Motor Drive in Flux-Weakening Region , 2008, IEEE Transactions on Industry Applications.

[10]  Bin Wu,et al.  Current-Source Converter and Cycloconverter Topologies for Industrial Medium-Voltage Drives , 2008, IEEE Transactions on Industrial Electronics.

[11]  Bin Wu,et al.  A novel converter configuration for wind applications using PWM CSI with diode rectifier and buck converter , 2011, 2011 IEEE International Electric Machines & Drives Conference (IEMDC).

[12]  M.N. Uddin,et al.  Development and Implementation of a Nonlinear Controller Incorporating Flux Control for IPMSM , 2007, IECON 2007 - 33rd Annual Conference of the IEEE Industrial Electronics Society.

[13]  M.J. Melfi,et al.  Permanent-Magnet Motors for Energy Savings in Industrial Applications , 2006, IEEE Transactions on Industry Applications.

[14]  Jing Zhang,et al.  Influence of Nonideal Voltage Measurement on Parameter Estimation in Permanent-Magnet Synchronous Machines , 2012, IEEE Transactions on Industrial Electronics.

[15]  Borislav Jeftenic,et al.  Direct torque control and virtual-flux based direct power control of current source converter in wind turbine application , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[16]  Maria Letizia Corradini,et al.  A Quasi-Sliding Mode Approach for Robust Control and Speed Estimation of PM Synchronous Motors , 2012, IEEE Transactions on Industrial Electronics.

[17]  T.A. Lipo,et al.  Wind Turbine Current-Source Converter Providing Reactive Power Control and Reduced Harmonics , 2007, IEEE Transactions on Industry Applications.

[18]  Bin Wu,et al.  Low cost current source converter solutions for variable speed wind energy conversion systems , 2011, 2011 IEEE International Electric Machines & Drives Conference (IEMDC).

[19]  Bin Wu,et al.  High power CSI-fed IPM drive system control with minimum dc-link current , 2010, IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society.

[20]  A. LAGRIOUI,et al.  Publication of Little Lion Scientific R & D , Islamabad PAKISTAN NONLINEAR ADAPTIVE BACKSTEPPING CONTROL OF PERMANENT MAGNET SYNCHRONOUS MOTOR ( PMSM ) , 2011 .

[21]  L. Harnefors,et al.  A Combined Position and Stator-Resistance Observer for Salient PMSM Drives: Design and Stability Analysis , 2012, IEEE Transactions on Power Electronics.

[22]  Marek Adamowicz,et al.  Advances in CSI-fed induction motor drives , 2011, 2011 7th International Conference-Workshop Compatibility and Power Electronics (CPE).

[23]  G. Moschopoulos,et al.  A Nonlinear Optimal Control Approach Based on the Control-Lyapunov Function for an AC/DC Converter Used in Electric Vehicles , 2012, IEEE Transactions on Industrial Informatics.

[24]  Somboon Sangwongwanich,et al.  Stability and Dynamic Performance Improvement of Adaptive Full-Order Observers for Sensorless PMSM Drive , 2012, IEEE Transactions on Power Electronics.

[25]  Teresa Orlowska-Kowalska,et al.  Optimum Trajectory Control of the Current Vector of a Nonsalient-Pole PMSM in the Field-Weakening Region , 2012, IEEE Transactions on Industrial Electronics.

[26]  Wootaik Lee,et al.  Analysis and Compensation of Time Delay Effects in Hardware-in-the-Loop Simulation for Automotive PMSM Drive System , 2012, IEEE Transactions on Industrial Electronics.

[27]  Shihua Li,et al.  Speed Control for PMSM Servo System Using Predictive Functional Control and Extended State Observer , 2012, IEEE Transactions on Industrial Electronics.

[28]  N.R. Zargari,et al.  DC-Link Current Minimization for High-Power Current-Source Motor Drives , 2008, IEEE Transactions on Power Electronics.

[29]  Weimin Wang,et al.  Permanent-Magnet Synchronous Generator Supplying an Isolated Load , 2010, IEEE Transactions on Magnetics.

[30]  Marcian N. Cirstea,et al.  Simulink Modeling and Design of an Efficient Hardware-Constrained FPGA-Based PMSM Speed Controller , 2012, IEEE Transactions on Industrial Informatics.

[31]  Andrzej M. Trzynadlowski,et al.  Robust Nonlinear Predictive Controller for Permanent-Magnet Synchronous Motors With an Optimized Cost Function , 2012, IEEE Transactions on Industrial Electronics.

[32]  S. Gopalakrishnan,et al.  A neuro-fuzzy approach to automatic diagnosis and location of stator inter-turn faults in CSI-fed PM brushless DC motors , 2005, IEEE Transactions on Energy Conversion.

[33]  Bin Wu,et al.  High-Power Converters and AC Drives , 2006 .

[34]  Bin Wu,et al.  A Novel Control Scheme for Current-Source-Converter-Based PMSG Wind Energy Conversion Systems , 2009, IEEE Transactions on Power Electronics.

[35]  Roberto Oboe,et al.  Sensorless full-digital PMSM drive with EKF estimation of speed and rotor position , 1999, IEEE Trans. Ind. Electron..

[36]  K. Tan,et al.  Optimum control strategies in energy conversion of PMSG wind turbine system without mechanical sensors , 2004, IEEE Transactions on Energy Conversion.

[37]  Han Ho Choi,et al.  Fuzzy Sliding Mode Speed Controller for PM Synchronous Motors With a Load Torque Observer , 2012, IEEE Transactions on Power Electronics.

[38]  B.M. Dehkordi,et al.  Nonlinear Sliding-Mode Controller for Sensorless Speed control of DC servo Motor Using Adaptive Backstepping Observer , 2006, 2006 International Conference on Power Electronic, Drives and Energy Systems.