RF figures-of-merit for process optimization

Today, transistor y-parameters are routinely being measured for the determination of the current-gain cut-off frequency f/sub T/ and the maximum oscillation frequency f/sub max/. In this paper, it is shown that a much wider use of y-parameter measurements can be made for the RF characterization of transistors. A method is presented to determine the small-signal behavior of actual RF circuit-blocks from the measurements of the y-parameters of the individual circuit components. This is applied to define additional RF figures-of-merit for basic building blocks of analogue and digital RF circuits. No equivalent transistor circuit or compact-model parameters are needed, which is important for giving quick feedback to process developers. This approach is illustrated on three basic RF circuit blocks using bipolar transistors.

[1]  Johannes M. C. Stork.  Bipolar transistor scaling for minimum switching delay and energy dissipation , 1988, Technical Digest., International Electron Devices Meeting.

[2]  G.A.M. Hurkx,et al.  QUBiC4X: An f/sub T//f/sub max/ = 130/140GHz SiGe:C-BiCMOS manufacturing technology witg elite passives for emerging microwave applications , 2004, Bipolar/BiCMOS Circuits and Technology, 2004. Proceedings of the 2004 Meeting.

[3]  G. Gonzalez.  Microwave Transistor Amplifiers: Analysis and Design , 1984 .

[4]  H. Veenstra,et al.  QUBiC4G: a f/sub T//f/sub max/ = 70/100 GHz 0.25 /spl mu/m low power SiGe-BiCMOS production technology with high quality passives for 12.5 Gb/s optical networking and emerging wireless applications up to 20 GHz , 2002, Proceedings of the Bipolar/BiCMOS Circuits and Technology Meeting.

[5]  N. Morris,et al.  QUBiC3: a 0.5 /spl mu/m BiCMOS production technology, with fT=30 GHz, fmax=60 GHz and high-quality passive components for wireless telecommunication applications , 1998, Proceedings of the 1998 Bipolar/BiCMOS Circuits and Technology Meeting (Cat. No.98CH36198).

[6]  Robert G. Meyer,et al.  Analysis and Design of Analog Integrated Circuits , 1993 .

[7]  A. Brunnschweiler,et al.  A propagation-delay expression and its application to the optimization of polysilicon emitter ECL processes , 1988 .

[8]  E.W. Greeneich.  An appropriate device figure of merit for bipolar CML , 1991, IEEE Electron Device Letters.

[9]  E. van der Heijden,et al.  A 19-23 GHz integrated LC-VCO in a production 70 GHz fT SiGe technology , 2003, ESSCIRC 2004 - 29th European Solid-State Circuits Conference (IEEE Cat. No.03EX705).

[10]  R. de Kort,et al.  Metal emitter SiGe:C HBTs , 2004, IEDM Technical Digest. IEEE International Electron Devices Meeting, 2004..

[11]  R. Brock,et al.  QUBiC4: a silicon RF-BiCMOS technology for wireless communication ICs , 2001, Proceedings of the 2001 BIPOLAR/BiCMOS Circuits and Technology Meeting (Cat. No.01CH37212).