On the microstructure, recrystallization texture, and mechanical properties of Al/WO3/SiC hybrid nanocomposite during accumulative roll bonding (ARB) process

[1]  E. Gavalas,et al.  The influence of second phase particles on texture during rolling of Al 3104 , 2022, International Journal of Material Forming.

[2]  H. Jafarian,et al.  On the microstructure, texture and mechanical properties through heat treatment in Al–CuO nanocomposite fabricated by Accumulative Roll Bonding (ARB) , 2021, Materials Science and Engineering: A.

[3]  E. Borhani,et al.  Effect of a Trace Amount Addition of CuO on Aluminum Sheet Processed by Accumulative Roll Bonding with the Common Roots and Rapid Annealing , 2021, Journal of Materials Research and Technology.

[4]  Hai‐Tao Liu,et al.  Effect of cold rolling on microstructure and texture evolution in strip casting Fe-36%Ni invar alloy foil , 2021 .

[5]  A. Gerlich,et al.  Stability of ultra-fine and nano-grains after severe plastic deformation: a critical review , 2021, Journal of Materials Science.

[6]  R. Petrov,et al.  Microstructural evolution and strengthening mechanisms in Al7075/ graphene nano-plates/ carbon nano-tubes composite processed through accumulative roll bonding , 2021 .

[7]  H. Jafarian,et al.  Microstructure analysis and observation of peculiar mechanical properties of Al/Cu/Zn/Ni multi-layered composite produced by Accumulative-Roll-Bonding (ARB) , 2021 .

[8]  T. B. Rao.  Microstructural, mechanical, and wear properties characterization and strengthening mechanisms of Al7075/SiCnp composites processed through ultrasonic cavitation assisted stir-casting , 2020, Materials Science and Engineering: A.

[9]  M. Tajally,et al.  The correlation of microstructure, recrystallization texture and mechanical properties with second–phase content in Al/WO3/SiC hybrid nanocomposite during ARB process , 2020 .

[10]  Wei Chen,et al.  Relationship among grain size, texture and mechanical properties of aluminums with different particle distributions , 2019, Materials Science and Engineering: A.

[11]  J. Driver.  The limitations of continuous dynamic recrystallization (CDRX) of aluminium alloys , 2018, Materials Letters.

[12]  R. Logé,et al.  Controlling grain structure and texture in Al-Mn from the competition between precipitation and recrystallization , 2017 .

[13]  Dong Nyung Lee,et al.  Numerical analysis on the formation of P-orientation near coarse precipitates in FCC crystals during recrystallization , 2017 .

[14]  M. Reihanian,et al.  Effect of strain path on microstructure, deformation texture and mechanical properties of nano/ultrafine grained AA1050 processed by accumulative roll bonding (ARB) , 2016 .

[15]  M. Tajally,et al.  Fabrication and characteristic of Al-based hybrid nanocomposite reinforced with WO3 and SiC by accumulative roll bonding process , 2015 .

[16]  R. M. Shereema,et al.  Structure and properties of modified compocast microsilica reinforced aluminum matrix composite , 2015 .

[17]  A. Hassani,et al.  Fabrication and characterization of hybrid composite strips with homogeneously dispersed ceramic particles by severe plastic deformation , 2015 .

[18]  P. Prangnell,et al.  The effect of Mn and Zr dispersoid-forming additions on recrystallization resistance in Al–Cu–Li AA2198 sheet , 2014 .

[19]  D. Raabe,et al.  Texture and microstructure evolution during non-crystallographic shear banding in a plane strain compressed Cu-Ag metal matrix composite , 2014 .

[20]  M. R. Toroghinejad,et al.  Hybrid composites produced by anodizing and accumulative roll bonding (ARB) processes , 2014 .

[21]  H. Jafarian,et al.  Effect of Pre-existing Nano Sized Precipitates on Microstructure and Mechanical Property of Al-0.2wt% Sc Highly Deformed by ARB Process , 2014 .

[22]  M. R. Toroghinejad,et al.  Fabrication of Al/Al2O3/TiC hybrid composite by anodizing and accumulative roll bonding processes and investigation of its microstructure and mechanical properties , 2013 .

[23]  M. Ketabchi,et al.  Accumulative press bonding; a novel manufacturing process of nanostructured metal matrix composites , 2013 .

[24]  M. R. Toroghinejad,et al.  Effect of stacking fault energy on nanostructure formation under accumulative roll bonding (ARB) process , 2013 .

[25]  M. Ma,et al.  Effect of W particles on the properties of accumulatively roll-bonded Al/W composites , 2012 .

[26]  Di Zhang,et al.  Reinforcement with graphene nanosheets in aluminum matrix composites , 2012 .

[27]  M. R. Toroghinejad,et al.  Investigation of nanostructured Al/Al2O3 composite produced by accumulative roll bonding process , 2012 .

[28]  L. Kestens,et al.  Recrystallization Textures in Aluminum Alloys: Experimental Study and Modelling , 2011 .

[29]  M. Alizadeh.  Comparison of nanostructured Al/B4C composite produced by ARB and Al/B4C composite produced by RRB process , 2010 .

[30]  B. Poorganji,et al.  Effect of cold work and non-isothermal annealing on the recrystallization behavior and texture evolution of a precipitation-hardenable aluminum alloy , 2010 .

[31]  M. R. Toroghinejad,et al.  An alternative method of processing MMCs by CAR process , 2010 .

[32]  N. Tsuji,et al.  Change in Microstructure and Texture during Annealing of Pure Copper Heavily Deformed by Accumulative Roll Bonding , 2007 .

[33]  W. C. Liu,et al.  Recrystallization textures of the M{113}〈110〉 and P{011}〈455〉 orientations in a supersaturated Al–Mn alloy , 2007 .

[34]  W. C. Liu,et al.  Evolution of recrystallization and recrystallization texture in continuous-cast AA 3015 aluminum alloy , 2005 .

[35]  Wei Zhang,et al.  Rolling and annealing textures of a SiCw/Al composite , 2004 .

[36]  M. Starink.  Analysis of aluminium based alloys by calorimetry: quantitative analysis of reactions and reaction kinetics , 2004 .

[37]  Jian-tao Liu,et al.  Recrystallization textures of continuous cast AA 3015 alloy: Development of the P orientation {011} 〈566〉 , 2003 .

[38]  P. Prangnell,et al.  Texture Evolution and Grain Refinement in Al Deformed to Ultra-High Strains by Accumulative Roll Bonding (ARB) , 2002 .

[39]  O. Engler.  An EBSD local texture study on the nucleation of recrystallization at shear bands in the alloy Al-3%Mg , 2001 .

[40]  S. Kalidindi,et al.  Deformation texture transition in brass: critical role of micro-scale shear bands , 2000 .

[41]  F. Barlat,et al.  Texture development and hardening characteristics of steel sheets under plane-strain compression , 1999 .

[42]  M. E. Kassner,et al.  Current issues in recrystallization: a review , 1997 .

[43]  Y. L. Liu,et al.  Deformation and recrystallization of a channel die compressed aluminium bicrystal with (112)[111]/(123)[412] orientation , 1995 .

[44]  T. Ozawa.  Estimation of activation energy by isoconversion methods , 1992 .

[45]  J. Jonas,et al.  Stress response and persistence characteristics of the ideal orientations of shear textures , 1989 .

[46]  I. Baker,et al.  The effect of particle size and spacing on the retardation of recrystallization in two-phase copper crystals , 1980 .

[47]  F. J. Humphreys.  Recrystallization mechanisms in two-phase alloys , 1979 .

[48]  M. Ashby.  The deformation of plastically non-homogeneous materials , 1970 .

[49]  H. E. Kissinger.  Reaction Kinetics in Differential Thermal Analysis , 1957 .

[50]  Z. Boumerzoug,et al.  Measurements of recrystallization kinetics by isochronal DSC in industrial drawn copper wires , 2018 .

[51]  E. Borhani,et al.  A study on the effect of nano-precipitates on fracture behavior of nano-structured Al-2wt%Cu alloy fabricated by accumulative roll bonding (ARB) process , 2016 .

[52]  B. Azada,et al.  A STUDY ON THE EFFECT OF NANO-PRECIPITATES ON FRACTURE BEHAVIOR OF NANOSTRUCTURED Al-2 wt % Cu ALLOY FABRICATED BY ACCUMULATIVE ROLL BONDING ( ARB ) PROCESS , 2016 .

[53]  A. Salimi,et al.  Evaluation of Mechanical Properties and Structure of 1100-Al Reinforced with Zro2 Nano-particles via Accumulatively Roll-bonded☆ , 2015 .

[54]  H. Jafarian,et al.  Microstructural Evolution during ARB Process of Al–0.2 mass% Sc Alloy Containing Al3Sc Precipitates in Starting Structures , 2012 .

[55]  O. Hunderi,et al.  On the Zener drag , 1985 .

[56]  P. Boswell.  On the calculation of activation energies using a modified Kissinger method , 1980 .