Planar Techniques for Fabricating X-Ray Diffraction Gratings and Zone Plates

Planar techniques employed in fabricating Fresnel zone plates and diffraction gratings are reviewed briefly, with emphasis on recent developments.

[1]  Charles V. Shank,et al.  Optical technique for producing 0.1‐μ periodic surface structures , 1973 .

[2]  Henry I. Smith,et al.  Fabrication techniques for surface-acoustic-wave and thin-film optical devices , 1974 .

[3]  J. F. Young,et al.  Vacuum ultraviolet holography , 1974 .

[4]  Henry I. Smith,et al.  Application of moiré techniques in scanning‐electron‐beam lithography and microscopy , 1975 .

[5]  T. Chang.  Proximity effect in electron-beam lithography , 1975 .

[6]  M. Hatzakis,et al.  New hybrid (e‐beam/x‐ray) exposure technique for high aspect ratio microstructure fabrication , 1979 .

[7]  D. C. Shaver,et al.  X-ray zone plates fabricated using electron-beam and x-ray lithography , 1979 .

[8]  Henry I. Smith,et al.  Spatial period division—A new technique for exposing submicrometer‐linewidth periodic and quasiperiodic patterns , 1979 .

[9]  B. J. Lin,et al.  Hybrid e‐beam/deep UV exposure using portable conformable masking (PCM) technique , 1979 .

[10]  D. Maydan,et al.  High resolution, steep profile, resist patterns , 1979, The Bell System Technical Journal.

[11]  Henry I. Smith,et al.  PROGRESS IN THE FABRICATION OF ARTIFICIAL MICROSTRUCTURES FOR X‐RAY IMAGING AND SPECTROSCOPY * , 1980 .

[12]  Dale C. Flanders,et al.  Replication of 175‐Å lines and spaces in polymethylmethacrylate using x‐ray lithography , 1980 .

[13]  C. Wilkinson,et al.  Sub‐20‐nm‐wide metal lines by electron‐beam exposure of thin poly(methyl methacrylate) films and liftoff , 1981 .

[14]  A. Wagner,et al.  Ion beam lithography , 1981 .

[15]  R. J. Hawryluk,et al.  Exposure and development models used in electron beam lithography , 1981 .

[16]  J. Y. Chen,et al.  Masked ion‐beam lithography: A feasibility demonstration for submicrometer device fabrication , 1981 .

[17]  N. P. Economou,et al.  A simple technique for modifying the profile of resist exposed by holographic lithography , 1981 .

[18]  Henry I. Smith,et al.  Gold transmission gratings with submicrometer periods and thicknesses ≳0.5 μm , 1981 .

[19]  A. Hawryluk,et al.  Deep-ultraviolet spatial-period division using an excimer laser. , 1982, Optics letters.

[20]  Daniel E. Prober,et al.  Chapter 4 - Nanometer-Scale Fabrication Techniques , 1982 .

[21]  Norman G. Einspruch,et al.  Vlsi Electronics: Microstructure Science , 1982 .

[22]  Harold G. Craighead,et al.  10‐nm linewidth electron beam lithography on GaAs , 1983 .

[23]  Mark L. Schattenburg,et al.  X‐ray phase lens design and fabrication , 1983 .

[24]  Henry I. Smith,et al.  Holographic lithography with thick photoresist , 1983 .