Nanostructure Core Fiber With Enhanced Performances: Design, Fabrication and Devices

We report a new type of silica-based all-solid fiber with a 2-D nanostructure core. The nanostructure core fiber (NCF) is formed by a 2-D array of high-index rods of sub-wavelength dimensions. We theoretically study the birefringence property of such fibers over a large wavelength range. Large-mode-area (LMA) structure with a typical high birefringence in the order of 10-4 can be easily realized. The attenuation of the fabricated NCF is as low as 3.5 dB/km at 1550 nm. Higher macro- and micro-bending losses compared with those of the single-mode fiber (SMF) due to the reduced index difference have been observed experimentally, which suggests that the NCF is potentially useful for curvature and strain sensing applications. A fiber Bragg grating (FBG) inscribed in such a novel fiber is side-polished to make use of its evanescent field for refractive index sensing. The refractive index sensitivity obtained is one order of magnitude higher than that of the side-polished FBG in SMF, while the temperature and strain performances are comparable with those of the SMF-based FBG.

[1]  J. Joannopoulos,et al.  Wavelength-scalable hollow optical fibres with large photonic bandgaps for CO2 laser transmission , 2002, Nature.

[2]  B. T. Meggitt,et al.  Optical Fiber Sensor Technology , 1999 .

[3]  P. Russell.  Photonic Crystal Fibers , 2003, Science.

[4]  Marcos A. R. Franco,et al.  Microstructured-core optical fibre for evanescent sensing applications. , 2006, Optics express.

[5]  P. Shum,et al.  Theoretical investigation of highly birefringent all-solid photonic bandgap fiber with elliptical cladding rods , 2006, IEEE Photonics Technology Letters.

[6]  M. Feit,et al.  Computation of mode properties in optical fiber waveguides by a propagating beam method. , 1980, Applied optics.

[7]  Kent A. Murphy,et al.  Optical fiber sensors , 1995, LEOS '95. IEEE Lasers and Electro-Optics Society 1995 Annual Meeting. 8th Annual Meeting. Conference Proceedings.

[8]  Yinian Zhu,et al.  Detection of external refractive index change with high sensitivity using long-period gratings in photonic crystal fiber , 2008 .

[9]  M Douay,et al.  Fabrication and characterization of an all-solid 2D photonic bandgap fiber with a low-loss region (< 20 dB/km) around 1550 nm. , 2005, Optics express.

[10]  G. Stewart.  Optical Waveguide Theory , 1983, Handbook of Laser Technology and Applications.

[11]  Kazuo Hotate,et al.  Optical fiber sensors , 1989 .

[12]  P. Shum,et al.  Silica-Based Birefringent Large-Mode-Area Fiber With a Nanostructure Core , 2008, IEEE Photonics Technology Letters.

[13]  J. F. Liu,et al.  Highly birefringent lamellar core fiber , 2005 .

[14]  Ping Shum,et al.  Low-loss all-solid photonic bandgap fiber. , 2007, Optics letters.

[15]  Daru Chen,et al.  Ultrahigh Birefringent Photonic Crystal Fiber With Ultralow Confinement Loss , 2007, IEEE Photonics Technology Letters.

[16]  Chongxiu Yu,et al.  Temperature-insensitive chemical sensor based on a fiber Bragg grating , 2007 .

[17]  N. Ngo,et al.  Silica-Based Nanostructure Core Fiber , 2008, IEEE Photonics Technology Letters.

[18]  J. Bokor,et al.  Bragg gratings fabricated in monomode photosensitive optical fiber by UV exposure through a phase mask , 1993 .

[19]  J. Broeng,et al.  Highly birefringent index-guiding photonic crystal fibers , 2001, IEEE Photonics Technology Letters.

[20]  X. Yu,et al.  Heterostructured photonic crystal fiber , 2005, IEEE Photonics Technology Letters.

[21]  B. T. Meggitt,et al.  Optical fiber sensor technology : advanced applications-bragg gratings and distributed sensors , 2000 .

[22]  D. M. Atkin,et al.  All-silica single-mode optical fiber with photonic crystal cladding. , 1996, Optics letters.

[23]  J Liu,et al.  Highly birefringent lamellar core fiber. , 2005, Optics express.