Accurate and rapid condition assessment of inservice infrastructure systems is critical for systemwide prioritization decisions. One major assessment consideration is structural section loss due to deterioration, for instance from corrosion. Modern 3D imaging, which generates high-resolution 3D point clouds, is capable of measuring this degradation. Despite growth in the fields of point cloud analysis, few studies have addressed the potential of using such data for creating and updating numerical finite element models of structures. This paper presents a framework for automatic and systematic 3D section loss detection in structural components, followed by a corresponding update to a finite element model. Point cloud data of a targeted structure is obtained by using recently developed Dense Structure from Motion (DSfM) algorithms. Section loss damage is then located and identified by using computer vision techniques. In order to preserve data integrity and resolve localized high fidelity details, direct 3D point cloud comparisons are applied instead of 3D surface reconstruction or curve fitting techniques that limit the accuracy of the structural analysis. An experimental case study validating the developed approach is presented, along with a discussion of potential uses for the analysis framework. This study aims to prototype a method for fast and reliable detection, structural model updating, and tracking of deterioration in structures, for use by infrastructure managers and engineers. The proposed methodology will enable engineers to use the updated structural model to determine the reserved capacity and remaining service life of structural elements in both in-service structural systems and under severe loading conditions.
[1]
D. Lague,et al.
Accurate 3D comparison of complex topography with terrestrial laser scanner: Application to the Rangitikei canyon (N-Z)
,
2013,
1302.1183.
[2]
Ali Khaloo,et al.
Extracting Structural Models through Computer Vision
,
2015
.
[3]
Luigi Fregonese,et al.
Assessing the seismic vulnerability of a historical building
,
2013
.
[4]
Pedro Arias,et al.
Exploitation of Geometric Data provided by Laser Scanning to Create FEM Structural Models of Bridges
,
2016
.
[5]
Tony DeRose,et al.
Surface reconstruction from unorganized points
,
1992,
SIGGRAPH.
[6]
Paul W. Fieguth,et al.
A review on computer vision based defect detection and condition assessment of concrete and asphalt civil infrastructure
,
2015,
Adv. Eng. Informatics.
[7]
D. Girardeau-Montaut,et al.
CHANGE DETECTION ON POINTS CLOUD DATA ACQUIRED W ITH A GROUND LASER SCANNER
,
2005
.
[8]
Markus König,et al.
Achievements and Challenges in Machine Vision-Based Inspection of Large Concrete Structures
,
2014
.
[9]
Michael M. Kazhdan,et al.
Screened poisson surface reconstruction
,
2013,
TOGS.
[10]
Joachim Giesen,et al.
Delaunay Triangulation Based Surface Reconstruction
,
2006
.
[11]
Heiko Hirschmüller,et al.
Stereo Processing by Semiglobal Matching and Mutual Information
,
2008,
IEEE Trans. Pattern Anal. Mach. Intell..
[12]
Manolis I. A. Lourakis,et al.
Automated as-built 3D reconstruction of civil infrastructure using computer vision: Achievements, opportunities, and challenges
,
2015,
Adv. Eng. Informatics.