Numerical modelling of bit–rock fracture mechanisms in percussive drilling with a continuum approach

SUMMARY This paper presents a numerical method for continuum modelling of the dynamic bit–rock interaction process in percussive drilling. The method includes a constitutive model based on a combination of the recent viscoplastic consistency model, the isotropic damage concept and a parabolic compression cap. The interaction between the drill bit and rock is modelled using contact mechanics by treating the bit as a rigid body. As the bit–rock interaction in percussive drilling is a transient event, the method is implemented in explicit dynamics FEM. The rock strength heterogeneity is characterized at the mesoscopic level statistically using the Weibull distribution. The bit–rock interaction is simulated under axisymmetric conditions using cylindrical and hemispherical buttons. The choice of the quite complex constitutive model accounting, e.g. for plastic compaction, viscoplastic shear and tensile failure along with induced damage and rate dependency is justified by numerical simulations. Moreover, the quasi-static and dynamic cases are compared in plane strain simulations. Finally, some results clarifying the discrepancy of opinions found in the literature concerning the side (lateral) crack formation are obtained. Copyright © 2010 John Wiley & Sons, Ltd.

[1]  L. J. Sluys,et al.  Viscoplasticity for instabilities due to strain softening and strain‐rate softening , 1997 .

[2]  Hongyuan Liu.  Numerical modelling of the rock fragmentation process by mechanical tools , 2004 .

[3]  Ekaterina Pavlovskaia,et al.  IMPACT FRACTURE OF ROCK MATERIALS DUE TO PERCUSSIVE DRILLING ACTION , 2004 .

[4]  Shaoquan Kou,et al.  Application of the DDM and fracture mechanics model on the simulation of rock breakage by mechanical tools , 1998 .

[5]  F. Dimaggio,et al.  MATERIAL MODEL FOR GRANULAR SOILS , 1971 .

[6]  Shu-Sheng Chiang,et al.  THE RESPONSE OF SOLIDS TO ELASTIC/ PLASTIC INDENTATION , 1980 .

[7]  R. Taylor,et al.  Lagrange constraints for transient finite element surface contact , 1991 .

[8]  Hongyuan Liu,et al.  Numerical Studies on Bit-Rock Fragmentation Mechanisms , 2008 .

[9]  C. Tang,et al.  Numerical simulation of progressive rock failure and associated seismicity , 1997 .

[10]  R. E. Knasmillner,et al.  Wave propagation, damage evolution, and dynamic fracture extension. Part I. Percussion drilling , 1996 .

[11]  T. Saksala.  Damage‐viscoplastic consistency model for rock fracture in heterogeneous rocks under dynamic loading , 2010 .

[12]  J. Alcalá,et al.  The plastic zone size in indentation experiments: The analogy with the expansion of a spherical cavity , 2006 .

[13]  Hongyuan Liu,et al.  Numerical simulation of the rock fragmentation process induced by indenters , 2002 .

[14]  W. Zhang,et al.  An elastic–plastic-cracking model for finite element analysis of indentation cracking in brittle materials , 2001 .

[15]  Antonio Huerta,et al.  An elastic plastic damage formulation for concrete: Application to elementary tests and comparison with an isotropic damage model , 2006 .

[16]  D. Owen,et al.  Discrete fracture in quasi-brittle materials under compressive and tensile stress states , 2004 .

[17]  G. Hahn.  A modified Euler method for dynamic analyses , 1991 .

[18]  Milan Jirásek,et al.  Damage-plastic model for concrete failure , 2006 .

[19]  J. P. Harrison,et al.  A mechanical degradation index for rock , 2001 .

[20]  Shaoquan Kou,et al.  Application of a Splitting Fracture Model to the Simulation of Rock Indentation Subsurface Fractures , 1997 .

[21]  Leon Mishnaevsky,et al.  PHYSICAL MECHANISMS OF HARD ROCK FRAGMENTATION UNDER MECHANICAL LOADING: A REVIEW , 1995 .

[22]  Ushnish Basu,et al.  Explicit finite element perfectly matched layer for transient three‐dimensional elastic waves , 2009 .

[23]  Wei Min Wang,et al.  Stationary and Propagative Instabilities in Metals: A Computational Point of View , 1997 .

[24]  B. Lawn,et al.  Indentation fracture: principles and applications , 1975 .