A review of wind turbine main bearings: design, operation, modelling, damage mechanisms and fault detection

Abstract. This paper presents a review of existing theory and practice relating to main bearings for wind turbines. The main bearing performs the critical role of supporting the turbine rotor, with replacements typically requiring its complete removal. The operational conditions and loading for wind turbine main bearings deviate significantly from those of more conventional power plants and other bearings present in the wind turbine power train, i.e. those in the gearbox and generator. This work seeks to thoroughly document current main-bearing theory in order to allow for appraisal of existing design and analysis practices, while also seeking to form a solid foundation for future research in this area. The most common main-bearing setups are presented along with standards for bearing selection and rating. Typical loads generated by a wind turbine rotor, and subsequently reacted at the main bearing, are discussed. This is followed by the related tribological theories of lubrication, wear and associated failure mechanisms. Finally, existing techniques for bearing modelling, fault diagnosis and prognosis relevant to the main bearing are presented.

[1]  Kenred Stadler,et al.  Investigation on the mechanisms of white etching crack (WEC) formation in rolling contact fatigue and identification of a root cause for bearing premature failure , 2016 .

[2]  U. Olofsson,et al.  Abrasive Wear of Rolling Bearings by Lubricant Borne Particles , 2006 .

[3]  Joachim Peinke,et al.  Turbulence and wind turbines , 2011 .

[4]  David McMillan,et al.  Wind turbine main‐bearing loading and wind field characteristics , 2019, Wind Energy.

[5]  Peter Tavner,et al.  Reliability of wind turbine subassemblies , 2009 .

[6]  R. Dwyer-Joyce Predicting the abrasive wear of ball bearings by lubricant debris , 1999 .

[7]  Zhenyou Zhang,et al.  Automatic Fault Prediction of Wind Turbine Main Bearing Based on SCADA Data and Artificial Neural Network , 2018 .

[8]  Ji Jinchen,et al.  The Load Distribution of the Main Shaft Bearing Considering Combined Load and Misalignment in a Floating Direct-Drive Wind Turbine , 2018 .

[9]  Peiyuan Ni,et al.  Non‐Metallic Inclusion Behaviors in a New Tundish and SEN Design Using a Swirling Flow during Continuous Casting of Steel , 2017 .

[10]  Muyiwa S. Adaramola,et al.  Experimental investigation of wake effects on wind turbine performance , 2011 .

[11]  David Infield,et al.  Effects of extreme and transient loads on wind turbine drive trains , 2012 .

[12]  Farshid Sadeghi,et al.  Material Inclusion Factors for Lundberg-Palmgren–Based RCF Life Equations , 2011 .

[13]  M.-H. Evans,et al.  Serial sectioning investigation of butterfly and white etching crack (WEC) formation in wind turbine gearbox bearings , 2013 .

[14]  Dongik Lee,et al.  Wind turbine main bearing fault detection via shaft speed signal analysis under constant load , 2016, 2016 16th International Conference on Control, Automation and Systems (ICCAS).

[15]  Yi Guo,et al.  Main Bearing Dynamics in Three-Point Suspension Drivetrains for Wind Turbines; National Wind Technology Center (NWTC), NREL (National Renewable Energy Laboratory) , 2015 .

[16]  Georg Jacobs,et al.  Determination of Wind Turbine Main Bearing Load Distribution , 2019, Journal of Physics: Conference Series.

[17]  Gabriel Abba,et al.  Approximate Analytical Model for Hertzian Elliptical Contact Problems , 2006 .

[18]  X Ai,et al.  Effect of debris contamination on the fatigue life of roller bearings , 2001 .

[19]  Bo Liu,et al.  Fatigue life prediction for wind turbine main shaft bearings , 2013, 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

[20]  Alex Maurício Araújo,et al.  A review on wind turbine control and its associated methods , 2018 .

[21]  N. Jenkins,et al.  Wind Energy Handbook: Burton/Wind Energy Handbook , 2011 .

[22]  Sofia Koukoura,et al.  Wind turbine gearbox failure and remaining useful life prediction using machine learning techniques , 2018, Wind Energy.

[23]  Maarten J. Kamper,et al.  Review of direct‐drive radial flux wind turbine generator mechanical design , 2012 .

[24]  Tomasz Barszcz,et al.  Wind Turbine Main Bearing Diagnosis - A Proposal of Data Processing and Decision Making Procedure under Non Stationary Load Condition , 2012 .

[25]  R. D. Evans,et al.  Prevention of Smearing Damage in Cylindrical Roller Bearings , 2013 .

[26]  Charles Meneveau,et al.  Flow Structure and Turbulence in Wind Farms , 2017 .

[27]  David McMillan,et al.  A lookup table approach to determining wind turbine operational fatigue loading from wind field measurements , 2016 .

[28]  F. Ville,et al.  Detrimental Effects of Debris Dents on Rolling Contact Fatigue , 2000 .

[29]  Aki Mikkola,et al.  Simple and Versatile Dynamic Model of Spherical Roller Bearing , 2013 .

[30]  Torgeir Moan,et al.  Long‐term contact fatigue analysis of a planetary bearing in a land‐based wind turbine drivetrain , 2015 .

[31]  Gordon A. Irons,et al.  Model of Inclusion Evolution During Calcium Treatment in the Ladle Furnace , 2018, Metallurgical and Materials Transactions B.

[32]  Yun-Shuai Su,et al.  Review of the damage mechanism in wind turbine gearbox bearings under rolling contact fatigue , 2019 .

[33]  Jianmin Wen,et al.  Load Performance of Large-Scale Rolling Bearings With Supporting Structure in Wind Turbines , 2012 .

[34]  Junhong Zhang,et al.  Misalignment analysis of journal bearing influenced by asymmetric deflection, based on a simple stepped shaft model , 2012 .

[35]  Seong-Wook Hong,et al.  Characteristics of tapered roller bearing subjected to combined radial and moment loads , 2014 .

[36]  Yi Guo,et al.  A systems engineering analysis of three-point and four-point wind turbine drivetrain configurations , 2017 .

[37]  Jochen Twele,et al.  Wind turbines - design and components , 2012 .

[38]  Georg Jacobs,et al.  Experimental and Model-based Analysis of the Force Transmission in a Rotor Bearing Support System , 2018 .

[39]  Ibrahim Zeid,et al.  Finite element modeling of rolling contact , 1981 .

[40]  Luciano Castillo,et al.  Impacts of the Low-Level Jet's Negative Wind Shear on the Wind Turbine , 2017 .

[41]  Ervin Bossanyi,et al.  Individual Blade Pitch Control for Load Reduction , 2003 .

[42]  Wei Qiao,et al.  Bearing Fault Diagnosis for Direct-Drive Wind Turbines via Current-Demodulated Signals , 2013, IEEE Transactions on Industrial Electronics.

[43]  Pieter Martin Lugt,et al.  Modern advancements in lubricating grease technology , 2016 .

[44]  Yibing Liu,et al.  Detection and Quantization of Bearing Fault in Direct Drive Wind Turbine via Comparative Analysis , 2016 .

[45]  Luciano Castillo,et al.  Toward Understanding Low Level Jet Climatology over West Texas and its Impact on Wind Energy , 2014 .

[46]  David E. Brewe,et al.  Simplified Solution for Elliptical-Contact Deformation Between Two Elastic Solids , 1977 .

[47]  Hugh Hunt,et al.  A dynamic model to predict the occurrence of skidding in wind-turbine bearings , 2011 .

[48]  J. Mann Wind field simulation , 1998 .

[49]  P.W. Lehn,et al.  Simulation Model of Wind Turbine 3p Torque Oscillations due to Wind Shear and Tower Shadow , 2006, 2006 IEEE PES Power Systems Conference and Exposition.

[50]  Daniel Micallef,et al.  A Review of Wind Turbine Yaw Aerodynamics , 2016 .

[51]  S. W. Dean,et al.  Sub-Surface Initiated Rolling Contact Fatigue—Influence of Non-Metallic Inclusions, Processing History, and Operating Conditions , 2010 .

[52]  Adam Stock Augmented Control for Flexible Operation of Wind Turbines , 2015 .

[53]  Jerry L. Hudgins,et al.  Bearing Fault Diagnosis of Direct-Drive Wind Turbines Using Multiscale Filtering Spectrum , 2017, IEEE Transactions on Industry Applications.

[54]  Michael N Kotzalas,et al.  Tribological advancements for reliable wind turbine performance , 2010, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[55]  Anand Natarajan,et al.  Assessment of Gearbox Operational Loads and Reliability under High Mean Wind Speeds , 2015 .

[56]  Georg Jacobs,et al.  "FlexPad" - Innovative conical sliding bearing for the main shaft of wind turbines , 2019 .

[57]  A. E. Maguire,et al.  Review and evaluation of wake loss models for wind energy applications , 2018, Applied Energy.

[58]  Jari Halme,et al.  Rolling contact fatigue and wear fundamentals for rolling bearing diagnostics - state of the art , 2010 .

[59]  H. Polinder,et al.  Comparison of direct-drive and geared generator concepts for wind turbines , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[60]  Mica Grujicic,et al.  Multiphysics computational analysis of white-etch cracking failure mode in wind turbine gearbox bearings , 2016 .

[61]  Georg Jacobs,et al.  Analysis of Wind-Turbine Main Bearing Loads Due to Constant Yaw Misalignments over a 20 Years Timespan , 2019, Energies.

[62]  James Carroll,et al.  Failure rate, repair time and unscheduled O&M cost analysis of offshore wind turbines , 2016 .

[63]  Yi Qu,et al.  Study on Fault Diagnosis of Wind Turbine Main Bearing Based on Finite Element Analysis and Wavelet Analysis , 2011 .

[64]  I. Green,et al.  A Finite Element Study of Elasto-Plastic Hemispherical Contact Against a Rigid Flat , 2005 .

[65]  Torgeir Moan,et al.  Statistical fault diagnosis of wind turbine drivetrain applied to a 5MW floating wind turbine , 2016 .