Design and Experimental Investigation of a New 2R1T Overconstrained Parallel Kinematic Machine With Actuation Redundancy

[1]  Xianwen Kong,et al.  Kinematic design of a new parallel kinematic machine for aircraft wing assembly , 2012, IEEE 10th International Conference on Industrial Informatics.

[2]  Sungbok Kim.  Operational quality analysis of parallel manipulators with actuation redundancy , 1997, Proceedings of International Conference on Robotics and Automation.

[3]  Gökhan Kiper,et al.  Function Generation Synthesis with a 2-DoF Overconstrained Double-Spherical 7R Mechanism Using the Method of Decomposition and Least Squares Approximation , 2015 .

[4]  John F. Gardner,et al.  Kinematics of redundantly actuated closed chains , 1990, IEEE Trans. Robotics Autom..

[5]  Qinchuan Li,et al.  New Indices for Optimal Design of Redundantly Actuated Parallel Manipulators , 2017 .

[6]  Frank Chongwoo Park,et al.  Design and analysis of a redundantly actuated parallel mechanism for rapid machining , 2001, IEEE Trans. Robotics Autom..

[7]  Vijay R. Kumar,et al.  Kinematics of Redundantly Actuated Closed Kinematic Chains , 1989 .

[8]  Tatsuo Arai,et al.  A modified Stewart platform manipulator with improved dexterity , 1993, IEEE Trans. Robotics Autom..

[9]  Jinsong Wang,et al.  A New Approach for Singularity Analysis and Closeness Measurement to Singularities of Parallel Manipulators , 2012 .

[10]  Qinchuan LI,et al.  New Family of RPR-Equivalent Parallel Mechanisms: Design and Application , 2017 .

[11]  Dong Liang,et al.  Singular-Perturbation-Based Nonlinear Hybrid Control of Redundant Parallel Robot , 2018, IEEE Transactions on Industrial Electronics.

[12]  Haitao Liu,et al.  A simple and visually orientated approach for type synthesis of overconstrained 1T2R parallel mechanisms , 2018, Robotica.

[13]  D. Caldwell,et al.  Geometry and Kinematic Analysis of a Redundantly Actuated Parallel Mechanism That Eliminates Singularities and Improves Dexterity , 2008 .

[14]  Jan Becker Høgsberg,et al.  Aalborg Universitet Characterization of clay-modified thermoset polymers under various environmental conditions for the use in high-voltage power pylons , 2017 .

[15]  Jianhe Lei,et al.  Kinematic analysis of a novel 3-DOF actuation redundant parallel manipulator using artificial intelligence approach , 2011 .

[16]  Jun Wu,et al.  A comparison study on the stiffness and natural frequency of a redundant parallel conveyor and its nonredundant counterpart , 2017 .

[17]  K. H. Hunt,et al.  Structural Kinematics of In-Parallel-Actuated Robot-Arms , 1983 .

[18]  Qinchuan Li,et al.  Type Synthesis of 3-DOF RPR-Equivalent Parallel Mechanisms , 2014, IEEE Transactions on Robotics.

[19]  Clément Gosselin,et al.  WRENCH-CLOSURE WORKSPACE OF SIX-DOF PARALLEL MECHANISMS DRIVEN BY 7 CABLES , 2005 .

[20]  Clément Gosselin,et al.  Redundancy in Parallel Mechanisms: A Review , 2018 .

[21]  Xin-Jun Liu,et al.  A new methodology for optimal kinematic design of parallel mechanisms , 2007 .

[22]  Congzhe Wang,et al.  Design and Kinematical Performance Analysis of a 3-RUS/RRR Redundantly Actuated Parallel Mechanism for Ankle Rehabilitation , 2013 .

[23]  Bruno Siciliano,et al.  The Tricept robot: Inverse kinematics, manipulability analysis and closed-loop direct kinematics algorithm , 1999, Robotica.

[24]  Yan Jin,et al.  Kinematic modeling of Exechon parallel kinematic machine , 2011 .

[25]  Qinchuan Li,et al.  Mobility, Kinematic Analysis, and Dimensional Optimization of New Three-Degrees-of-Freedom Parallel Manipulator With Actuation Redundancy , 2017 .

[26]  Jongwon Kim,et al.  Antagonistic Stiffness Optimization of Redundantly Actuated Parallel Manipulators in a Predefined Workspace , 2013, IEEE/ASME Transactions on Mechatronics.

[27]  Nikolaos G. Tsagarakis,et al.  A High-performance Redundantly Actuated Parallel Mechanism for Ankle Rehabilitation , 2009, Int. J. Robotics Res..

[28]  K. H. Hunt,et al.  Kinematic geometry of mechanisms , 1978 .

[29]  Clément Gosselin,et al.  Singularity analysis of closed-loop kinematic chains , 1990, IEEE Trans. Robotics Autom..

[30]  John F. Gardner,et al.  Kinematics and control of redundantly actuated closed chains , 1989, Proceedings, 1989 International Conference on Robotics and Automation.