Analysing Metals in Bottle-Grade Poly(ethylene terephthalate) by X-ray Fluorescence Spectrometry

After a rigorous cleaning process, recycled food-grade poly(ethylene terephthalate) (PET), can be mixed with virgin PET resin in different concentrations and used for packaging of soft drinks. Therefore, it is important to have an experimental method to distinguish the presence of recycled polymer in a batch and to check its “true quality.” One of the issues to be verified is the presence of inorganic contaminants due to the recycling process. X-ray fluorescence technique is one alternative for this kind of analysis. The results obtained in this work show that bottle-grade PET samples (PET-btg) are made either via direct esterification or by a transesterification process. Samples that were subjected to thermo-mechanical processings (superclean® processing, PET-btg blends processed in our laboratory and soft drink PET packaging) present Fe Kα emission lines with higher intensities than those presented by virgin bottle-grade PET. After applying principal component analysis, it can be concluded that Fe is an intrinsic contaminant after the recycling process, furnishing a way to indicate class separations of PET-btg. A calibration and validation partial least squares model was constructed to predict the weight percent of post-consumption bottle-grade PET in commercial PET samples. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010

[1]  M. Eberlin,et al.  Poly (ethylene terephthalate) thermo-mechanical and thermo-oxidative degradation mechanisms , 2009 .

[2]  M. Ferrão,et al.  Determination of intrinsic viscosity of poly(ethylene terephthalate) using infrared spectroscopy and multivariate calibration method. , 2006, Talanta.

[3]  M. Bueno,et al.  Sucrose inversion monitored by x‐ray scattering and chemometrics , 2007 .

[4]  S. D. Jong,et al.  Three-way principal component analysis applied to food analysis: an example , 2002 .

[5]  R. Grieken,et al.  X-ray spectrometry : recent technological advances , 2004 .

[6]  Paul Geladi,et al.  Chemometrics in spectroscopy. Part 1. Classical chemometrics , 2003 .

[7]  B. Hołyńska,et al.  Simple method of determination of copper, mercury and lead in potable water with preliminary pre-concentration by total reflection X-ray fluorescence spectrometry , 1996 .

[8]  J. Omote,et al.  X-Ray fluorescence analysis utilizing the fundamental parameter method for the determination of the elemental composition in plant samples , 1995 .

[9]  F. Gozzo,et al.  Fingerprinting of bottle-grade poly(ethylene terephthalate) via matrix-assisted laser desorption/ionization mass spectrometry , 2010 .

[10]  Ka Ming Ng,et al.  Synthesis of prepolymerization stage in polycondensation processes , 1999 .

[11]  M. Bueno,et al.  Relevant information of concomitants obtained from background signal using thermospray flame furnace atomic absorption spectrometry (TS-FF-AAS) and chemometric tools , 2009 .

[12]  M. Bueno,et al.  X-ray scattering and multivariate analysis for classification of organic samples: a comparative study using Rh tube and synchrotron radiation. , 2007, Analytica chimica acta.

[13]  Fabíola Manhas Verbi Pereira,et al.  Development of a methodology for calcium, iron, potassium, magnesium, manganese, and zinc quantification in teas using X-ray spectroscopy and multivariate calibration. , 2006, Journal of agricultural and food chemistry.

[14]  Jacob Sherman,et al.  The theoretical derivation of fluorescent X-ray intensities from mixtures , 1955 .

[15]  Bin Chen,et al.  Contamination of Canadian and European bottled waters with antimony from PET containers. , 2006, Journal of environmental monitoring : JEM.

[16]  V. V. Shevchenko,et al.  The formation of polyethylene terephthalate in the presence of dicarboxylic acids , 1979 .

[17]  K. Ravindranath,et al.  Modeling of poly(ethylene terephthalate) reactors: 4. A continuous esterification process , 1982 .

[18]  W. Macdonald.  New advances in poly(ethylene terephthalate) polymerization and degradation , 2002 .

[19]  R. Kotek,et al.  Review of conventional and novel polymerization processes for polyesters , 2006 .

[20]  W. Romão,et al.  Poli(tereftalato de etileno), PET: uma revisão sobre os processos de síntese, mecanismos de degradação e sua reciclagem , 2009 .

[21]  Nobukatsu Fujino,et al.  Theoretical Calculation of Fluorescent X-Ray Intensities in Fluorescent X-Ray Spectrochemical Analysis. , 1966 .

[22]  D. Dollimore,et al.  Aspects of the chemistry of poly(ethylene terephthalate): 5. Polymerization of bis(hydroxyethyl)terephthalate by various metallic catalysts , 1984 .

[23]  Daniel Laguitton,et al.  Lama I - A General Fortrah Program for Quantitative X-ray Fluorescence Analysis , 1976 .

[24]  M. Bueno,et al.  Calibration of paint and varnish properties: Potentialities using X-ray Spectroscopy and Partial Least Squares , 2008 .

[25]  R. Franz,et al.  European survey on post-consumer poly(ethylene terephthalate) (PET) materials to determine contamination levels and maximum consumer exposure from food packages made from recycled PET , 2004, Food additives and contaminants.

[26]  F. Welle.  Post-consumer contamination in high-density polyethylene (HDPE) milk bottles and the design of a bottle-to-bottle recycling process , 2005, Food additives and contaminants.

[27]  R. Bro.  PARAFAC. Tutorial and applications , 1997 .

[28]  M. Salvador,et al.  Multielement analysis of soft drinks by X-ray fluorescence spectrometry. , 2005, Journal of agricultural and food chemistry.