Non-axisymmetric bending of thin annular plates due to circumferentially distributed moments

Abstract The non-linear deformation of a thin annular plate subjected to circumferentially distributed bending moments is studied. A von Karman plate model is adopted to formulate the equations of motion. Free–free boundary conditions have been applied at both inner and outer edges. The matrix formulation of the Differential Quadrature Method is used to discretise and solve the governing equations. Linear analysis predicts that the annular disk deforms axisymmetrically into a spherical dome. However, the proposed non-linear analysis shows that a symmetry breaking bifurcation may occur after which the linear solution becomes unstable and the plate transitions into a non-axisymmetric cylindrical deformation. This is the case when at least one of two parameters reaches a critical value. These parameters are the non-dimensionalised ratio between applied moment and bending stiffness and the ratio between inner and outer radius. Furthermore, it is noted that free-free boundary conditions and circumferentially distributed bending moments do not break the circular symmetry of the annular disk. Hence, the principal axes of curvature in the deformed configuration do not have a preferred orientation. Therefore, the present work describes a shell possessing infinite identical equilibria, having different yet no favoured direction and, hence, links to previous researches on neutrally stable structures.

[1]  W. Chen,et al.  The Study on the Nonlinear Computations of the DQ and DC Methods , 1999, ArXiv.

[2]  Sergio Pellegrino,et al.  A Zero-Stiffness Elastic Shell Structure , 2011 .

[3]  Levi H. Dudte,et al.  Geometric mechanics of curved crease origami. , 2012, Physical review letters.

[4]  Paul M. Weaver,et al.  Multi-stable composite twisting structure for morphing applications , 2012, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[5]  Paul M. Weaver,et al.  Bistable plates for morphing structures: A refined analytical approach with high-order polynomials , 2010 .

[6]  Eric Harold Mansfield.  Bending, buckling and curling of a heated elliptical plate , 1965, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[7]  Adem Kiliçman,et al.  Some new connections between matrix products for partitioned and non-partitioned matrices , 2007, Comput. Math. Appl..

[8]  F. Bloom,et al.  Handbook of Thin Plate Buckling and Postbuckling , 2000 .

[9]  I. Bond,et al.  Morphing skins , 2008, The Aeronautical Journal (1968).

[10]  C. Shu.  Differential Quadrature and Its Application in Engineering , 2000 .

[11]  Paul M. Weaver,et al.  A Morphing Composite Air Inlet with Multiple Stable Shapes , 2011 .

[12]  S. Guest,et al.  Prestressed Morphing Bistable and Neutrally Stable Shells , 2011 .

[13]  S. Timoshenko,et al.  THEORY OF PLATES AND SHELLS , 1959 .

[14]  E. H. Mansfield,et al.  Bending, buckling and curling of a heated thin plate , 1962, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[15]  R. Bellman,et al.  DIFFERENTIAL QUADRATURE: A TECHNIQUE FOR THE RAPID SOLUTION OF NONLINEAR PARTIAL DIFFERENTIAL EQUATIONS , 1972 .

[16]  Jen-San Chen,et al.  Non-axisymmetric warping of a heavy circular plate on a flexible ring support , 2010 .

[17]  R. S. Brand,et al.  Postbuckling of Orthotropic Annular Plates , 1973 .

[18]  W. Chen,et al.  The application of special matrix product to differential quadrature solution of geometrically nonlinear bending of orthotropic rectangular plates , 1999, ArXiv.

[19]  A. G. Striz,et al.  Nonlinear bending analysis of orthotropic rectangular plates by the method of differential quadrature , 1989 .

[20]  Hejun Du,et al.  Application of generalized differential quadrature method to structural problems , 1994 .

[21]  Chang Shu,et al.  A generalized approach for implementing general boundary conditions in the GDQ free vibration analysis of plates , 1997 .

[22]  K. M. Liew,et al.  Differential quadrature element method for static analysis of Reissner-Mindlin polar plates , 1999 .

[23]  Paul M. Weaver,et al.  Concepts for morphing airfoil sections using bi-stable laminated composite structures , 2008 .

[24]  R. Bellman,et al.  DIFFERENTIAL QUADRATURE AND LONG-TERM INTEGRATION , 1971 .

[25]  Xinwei Wang,et al.  A NEW APPROACH IN APPLYING DIFFERENTIAL QUADRATURE TO STATIC AND FREE VIBRATIONAL ANALYSES OF BEAMS AND PLATES , 1993 .

[26]  Michael W. Hyer,et al.  Some Observations on the Cured Shape of Thin Unsymmetric Laminates , 1981 .