Model-Based Assessment of Hybrid Powertrain Solutions

[1]  Pierluigi Pisu,et al.  A Comparative Study Of Supervisory Control Strategies for Hybrid Electric Vehicles , 2007, IEEE Transactions on Control Systems Technology.

[2]  Zoran Filipi,et al.  Simulation Study of a Series Hydraulic Hybrid Propulsion System for a Light Truck , 2007 .

[3]  Giorgio Rizzoni,et al.  A-ECMS: An Adaptive Algorithm for Hybrid Electric Vehicle Energy Management , 2005, CDC 2005.

[4]  Robert E. Hebner,et al.  Flywheel batteries for vehicles , 2002, Proceedings of the 2002 Workshop on Autonomous Underwater Vehicles, 2002..

[5]  Joseph H. Beno,et al.  Design and testing of a flywheel battery for a transit bus , 1999 .

[6]  Zoran Filipi,et al.  Hydraulic Hybrid Propulsion for Heavy Vehicles: Combining the Simulation and Engine-In-the-Loop Techniques to Maximize the Fuel Economy and Emission Benefits , 2010 .

[7]  Joseph J. Zierer,et al.  Performance testing of a vehicular flywheel energy system , 2005 .

[8]  D. Cross,et al.  High Speed Flywheel Based Hybrid Systems for Low Carbon Vehicles , 2008 .

[9]  Mehrdad Ehsani,et al.  Investigation of the Effectiveness of Regenerative Braking for EV and HEV , 1999 .

[10]  Alireza Veshagh,et al.  Fuel Economy and Performance Comparison of Alternative Mechanical Hybrid Powertrain Configurations , 2008 .

[11]  Matthew Burke,et al.  Regenerative Braking Strategies for A Parallel Hybrid Powertrain with Torque Controlled IVT , 2005 .

[12]  Gem Vael,et al.  Efficiency of a variable displacement open circuit floating cup pump , 2009 .

[13]  Peter A. J. Achten.  The Hydrid Transmission , 2007 .

[14]  Kerem Koprubasi,et al.  Modeling and Control of a Hybrid-Electric Vehicle for Drivability and Fuel Economy Improvements , 2008 .

[15]  Simona Onori,et al.  A Comparative Analysis of Energy Management Strategies for Hybrid Electric Vehicles , 2011 .

[16]  Douglas Cross,et al.  Mechanical Hybrid System Comprising a Flywheel and CVT for Motorsport and Mainstream Automotive Applications , 2009 .

[17]  Nicolò Cavina,et al.  Guidelines for Integration of Kinetic Energy Recovery System (KERS) based on Mechanical Flywheel in an Automotive Vehicle , 2010 .