IR sensitization of an indene-C60 bisadduct (ICBA) in ternary organic solar cells

This article presents a smart strategy to successfully tackle two main limitations of organic solar cells (OSCs) in one step: the narrow absorption window of polymers as well as the Voc limitation related to the mono-PCBM. We demonstrate the high OSC performance of >5% in the combination of a fullerene multiadduct, i.e. indene-C60 bisadduct (ICBA) with a low bandgap polymer employing the concept of ternary OSCs. Solar cells achieving a fill factor (FF) of >60% along with high quantum efficiency in the near IR region are demonstrated for ternary composites consisting of P3HT, the fullerene-bisindene adduct of ICBA and a low bandgap copolymer sensitizer. Using P3HT as an efficient transport matrix with non-Langevin recombination dynamics allowed us to limit and overcome the otherwise dominant recombination losses of the indene-C60 bisadduct – low bandgap copolymer blends. The success of this strategy resulted in a relative efficiency improvement of over 25%.

[1]  Eric T. Hoke,et al.  Molecular packing and solar cell performance in blends of polymers with a bisadduct fullerene. , 2012, Nano letters.

[2]  Martijn Lenes,et al.  Fullerene Bisadducts for Enhanced Open‐Circuit Voltages and Efficiencies in Polymer Solar Cells , 2008 .

[3]  Martin J. Heeney,et al.  Influence of Phase Segregation on Recombination Dynamics in Organic Bulk‐Heterojunction Solar Cells , 2011, 1107.1576.

[4]  Yongfang Li,et al.  Poly(thieno[3,2-b]thiophene-alt-bithiazole): A D–A Copolymer Donor Showing Improved Photovoltaic Performance with Indene-C60 Bisadduct Acceptor , 2012 .

[5]  Ye Tao,et al.  Bulk heterojunction solar cells using thieno[3,4-c]pyrrole-4,6-dione and dithieno[3,2-b:2',3'-d]silole copolymer with a power conversion efficiency of 7.3%. , 2011, Journal of the American Chemical Society.

[6]  Ganesh D. Sharma,et al.  Improved power conversion efficiency of bulk heterojunction poly(3-hexylthiophene):PCBM photovoltaic devices using small molecule additive , 2011 .

[7]  Christoph J. Brabec,et al.  Two Novel Cyclopentadithiophene-Based Alternating Copolymers as Potential Donor Components for High-Efficiency Bulk-Heterojunction-Type Solar Cells , 2008 .

[8]  Alexander B. Sieval,et al.  Electron Trapping in Higher Adduct Fullerene‐Based Solar Cells , 2009 .

[9]  S. Jenekhe,et al.  Enhanced Open Circuit Voltage and Efficiency of Donor–Acceptor Copolymer Solar Cells by Using Indene-C60 Bisadduct , 2012 .

[10]  Christoph J. Brabec,et al.  Inverted organic solar cells using a solution processed aluminum-doped zinc oxide buffer layer , 2011 .

[11]  Bumjoon J. Kim,et al.  Facile Synthesis of o-Xylenyl Fullerene Multiadducts for High Open Circuit Voltage and Efficient Polymer Solar Cells , 2011 .

[12]  Wei You,et al.  Development of fluorinated benzothiadiazole as a structural unit for a polymer solar cell of 7 % efficiency. , 2011, Angewandte Chemie.

[13]  C. Brabec,et al.  Charge Transport and Recombination in Low‐Bandgap Bulk Heterojunction Solar Cell using Bis‐adduct Fullerene , 2011 .

[14]  C. Brabec,et al.  Origin of the Open Circuit Voltage of Plastic Solar Cells , 2001 .

[15]  Yongfang Li,et al.  6.5% Efficiency of Polymer Solar Cells Based on poly(3‐hexylthiophene) and Indene‐C60 Bisadduct by Device Optimization , 2010, Advanced materials.

[16]  Yang Yang,et al.  Polymer solar cells with enhanced open-circuit voltage and efficiency , 2009 .

[17]  J. C. de Mello,et al.  Experimental determination of the rate law for charge carrier decay in a polythiophene: Fullerene solar cell , 2008 .

[18]  Christoph J. Brabec,et al.  Performance Enhancement of the P3HT/PCBM Solar Cells through NIR Sensitization Using a Small‐Bandgap Polymer , 2012 .

[19]  Edward Van Keuren,et al.  Endohedral fullerenes for organic photovoltaic devices. , 2009, Nature materials.

[20]  Christoph J. Brabec,et al.  Near IR Sensitization of Organic Bulk Heterojunction Solar Cells: Towards Optimization of the Spectral Response of Organic Solar Cells , 2010 .

[21]  Christoph J. Brabec,et al.  Organic tandem solar cells: A review , 2009 .

[22]  W. You,et al.  Parallel-like bulk heterojunction polymer solar cells. , 2012, Journal of the American Chemical Society.

[23]  C. Brabec,et al.  Nano-morphology characterization of organic bulk heterojunctions based on mono and bis-adduct fullerenes , 2012 .

[24]  H. Ohkita,et al.  Selective Dye Loading at the Heterojunction in Polymer/Fullerene Solar Cells , 2011 .

[25]  Thomas A. Lada,et al.  Novel bis-C60 derivative compared to other fullerene bis-adducts in high efficiency polymer photovoltaic cells , 2011 .

[26]  Zhengguo Zhu,et al.  Influence of the Bridging Atom on the Performance of a Low‐Bandgap Bulk Heterojunction Solar Cell , 2010, Advanced materials.