Research on Deadbeat Current Prediction Vector Control System of Axial Flux Permanent Magnet Synchronous Motor for Electric Bus Based on Efficiency Optimal Torque Distribution Method

In order to improve the cruising range of electric bus, this paper studies the deadbeat current prediction vector control system of axial flux permanent magnet synchronous motor (AFPMSM) for electric bus based on the optimal torque distribution method. Firstly, the mathematical model of the three stators-double rotors AFPMSM is established. Secondly, in order to improve the high efficiency range, the efficiency optimal torque distribution method is proposed based on the average torque distribution method and the back propagation (BP) neural network is used to find the optimal torque distribution method. Then a current control strategy based on deadbeat current prediction control is proposed to improve the torque tracking characteristics. Finally, a drive control system is developed for the proposed control strategy, and experimental research and vehicle testing are carried out. The experimental results show that the BP neural network-based torque distribution method designed in this paper increases the high efficiency range of the drive system and improves the cruising range of the electric bus. The drive system using a current controller based on deadbeat current prediction control exhibits good dynamic and steady state performance.

[1]  S.a Neethu,et al.  Efficiency Improvement of an Axial Flux Permanent Magnet Brushless DC Motor for LVAD Application , 2011 .

[2]  Jianguo Zhu,et al.  State Feedback Control for a PM Hub Motor Based on Gray Wolf Optimization Algorithm , 2020, IEEE Transactions on Power Electronics.

[3]  Xiaolin Tang,et al.  A novel simplified model for torsional vibration analysis of a series-parallel hybrid electric vehicle , 2017 .

[4]  Tingzhang Liu,et al.  Research on a Sliding Mode Vector Control System Based on Collaborative Optimization of an Axial Flux Permanent Magnet Synchronous Motor for an Electric Vehicle , 2018, Energies.

[5]  Haisheng Yu,et al.  Novel Torsional Vibration Modeling and Assessment of a Power-Split Hybrid Electric Vehicle Equipped With a Dual-Mass Flywheel , 2018, IEEE Transactions on Vehicular Technology.

[6]  Chao Yang,et al.  On Charging Scheduling Optimization for a Wirelessly Charged Electric Bus System , 2018, IEEE Transactions on Intelligent Transportation Systems.

[7]  Meikang Qiu,et al.  Public Vehicles for Future Urban Transportation , 2016, IEEE Transactions on Intelligent Transportation Systems.

[8]  Chao Yang,et al.  Correctional DP-Based Energy Management Strategy of Plug-In Hybrid Electric Bus for City-Bus Route , 2015, IEEE Transactions on Vehicular Technology.

[9]  Ren He,et al.  Design of an Energy Management Strategy for a Parallel Hybrid Electric Bus Based on an IDP-ANFIS Scheme , 2018, IEEE Access.

[10]  Jianguo Zhu,et al.  Torque Analysis and Dynamic Performance Improvement of a PMSM for EVs by Skew Angle Optimization , 2019, IEEE Transactions on Applied Superconductivity.

[11]  Feifei Bu,et al.  An Integrated Topology of Charger and Drive for Electric Buses , 2016, IEEE Transactions on Vehicular Technology.

[12]  Scott D. Sudhoff,et al.  Analysis of Electric Machinery and Drive Systems , 1995 .

[13]  Yingfeng Cai,et al.  Multi-Objective Coordination Control Strategy of Distributed Drive Electric Vehicle by Orientated Tire Force Distribution Method , 2018, IEEE Access.

[14]  Min Zhang,et al.  SMES/Battery Hybrid Energy Storage System for Electric Buses , 2016, IEEE Transactions on Applied Superconductivity.

[15]  Zebin Yang,et al.  MPTC for PMSMs of EVs With Multi-Motor Driven System Considering Optimal Energy Allocation , 2019, IEEE Transactions on Magnetics.

[16]  Y. Demir,et al.  Design and validation of a 24-pole coreless axial flux permanent magnet motor for a solar powered vehicle , 2016, 2016 XXII International Conference on Electrical Machines (ICEM).

[17]  Ardalan Vahidi,et al.  Mixed-Integer Linear Programming for Optimal Scheduling of Autonomous Vehicle Intersection Crossing , 2018, IEEE Transactions on Intelligent Vehicles.

[18]  Jing Zhao,et al.  Research on an Axial Flux PMSM with Radially Sliding Permanent Magnets , 2015 .

[19]  Sang-Yong Jung,et al.  Optimal Design of an Axial Flux Permanent Magnet Synchronous Motor for the Electric Bicycle , 2016, IEEE Transactions on Magnetics.

[20]  D. Liang,et al.  Hierarchical thermal network analysis of axial-flux permanent-magnet synchronous machine for electric motorcycle , 2018 .

[21]  Yufeng Zhang,et al.  Analysis and Design of Ironless Axial Flux Permanent Magnet Synchronous Motor , 2018, 2018 10th International Conference on Intelligent Human-Machine Systems and Cybernetics (IHMSC).

[22]  P. Sergeant,et al.  An optimal design of a 5MW AFPMSM for wind turbine applications using analytical model , 2016, 2016 XXII International Conference on Electrical Machines (ICEM).

[23]  Kari Tammi,et al.  Stochastic Driving Cycle Synthesis for Analyzing the Energy Consumption of a Battery Electric Bus , 2018, IEEE Access.

[24]  Junhui Shi,et al.  Optimization of a dual-motor coupled powertrain energy management strategy for a battery electric bus , 2018 .

[25]  Feng Chai,et al.  A novel structure of axial flux permanent magnet synchronous machine with high torque density for electrical vehicle applications , 2017, IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society.

[26]  Leon M. Tolbert,et al.  Multiport Bidirectional SRM Drives for Solar-Assisted Hybrid Electric Bus Powertrain With Flexible Driving and Self-Charging Functions , 2018, IEEE Transactions on Power Electronics.

[28]  Ming Cao,et al.  Multi-Objective Optimization Control of Distributed Electric Drive Vehicles Based on Optimal Torque Distribution , 2019, IEEE Access.