Synergetic Evolution of the Microscopic Grain Orientation and Macroscopic Superconducting Properties of REBCO Tape Under Sever Deformation

[1]  Youhe Zhou,et al.  Electromagnetic-thermal-structure multi-layer nonlinear elastoplastic modelling study on epoxy-impregnated REBCO pancake coils in high-field magnets , 2022, Superconductivity.

[2]  H. Suo,et al.  Database of the effect of stabilizer on the resistivity and thermal conductivity of 20 different commercial REBCO tapes , 2022, Superconductor Science and Technology.

[3]  D. Larbalestier,et al.  Analysis of local burnout in a sub-scale test coil for the 32 T magnet after spontaneous quenches during fast ramping , 2022, Superconductor Science and Technology.

[4]  T. Qu,et al.  Critical current degradation and delamination crack observation of epoxy-coated REBCO superconducting tapes after thermal cycles in liquid nitrogen , 2021 .

[5]  Youhe Zhou,et al.  Probing of the internal damage morphology in multilayered high-temperature superconducting wires , 2021, Nature Communications.

[6]  Jiangtao Shi,et al.  Ultra-fast growth of cuprate superconducting films: Dual-phase liquid assisted epitaxy and strong flux pinning , 2021 .

[7]  J. MacManus‐Driscoll,et al.  Processing and application of high-temperature superconducting coated conductors , 2021, Nature Reviews Materials.

[8]  H. Suo,et al.  In Situ EBSD Study on the Microstructural Transformation of the Ni5W Substrate for Coated Conductors , 2021, Microscopy and Microanalysis.

[9]  H. Ueda,et al.  Numerical evaluation of the deformation of REBCO pancake coil, considering winding tension, thermal stress, and screening-current-induced stress , 2020 .

[10]  X. Gou,et al.  Interface crack growth rate and fatigue life of multilayer-coated conductor tapes , 2020 .

[11]  Youhe Zhou,et al.  Stress, strain and electromechanical analyses of (RE)Ba2Cu3Ox conductors using three-dimensional/two-dimensional mixed-dimensional modeling: fabrication, cooling and tensile behavior , 2020, Superconductor Science and Technology.

[12]  D. Park,et al.  Screening-Current-Induced Strain Gradient on REBCO Conductor: An Experimental and Analytical Study With Small Coils Wound With Monofilament and Striated Multifilament REBCO Tapes , 2020, IEEE Transactions on Applied Superconductivity.

[13]  Yaohui Wang,et al.  World record 32.35 tesla direct-current magnetic field generated with an all-superconducting magnet , 2020, Superconductor Science and Technology.

[14]  D. Park,et al.  Experimental and Numerical Studies on a Method to Mitigate Screening Current-Induced Field for No-Insulation REBCO Coils , 2019, IEEE Transactions on Applied Superconductivity.

[15]  G. Nishijima,et al.  International round robin test for tensile testing HTS wires at cryogenic temperatures , 2019, Superconductor Science and Technology.

[16]  Y. Yanagisawa,et al.  Degradation of the performance of an epoxy-impregnated REBCO solenoid due to electromagnetic forces , 2018 .

[17]  M. Breschi,et al.  International Round Robin Test for Critical Current Measurement of RE-Ba-Cu-O Superconducting Tapes , 2018, IEEE Transactions on Applied Superconductivity.

[18]  Yanqun Guo,et al.  A review of thickness-induced evolutions of microstructure and superconducting performance of REBa2Cu3O7−δ coated conductor , 2017 .

[19]  S. Hahn,et al.  26 T 35 mm all-GdBa2Cu3O7–x multi-width no-insulation superconducting magnet , 2016 .

[20]  C. Rüssel,et al.  An experimental viewpoint on the information depth of EBSD. , 2016, Scanning.

[21]  H. W. Weber,et al.  Stress dependence of the critical currents in neutron irradiated (RE)BCO coated conductors , 2013, 1301.4436.

[22]  M. Dedicatoria,et al.  Variation of the strain effect on the critical current due to external lamination in REBCO coated conductors , 2012 .

[23]  H. Okuda,et al.  Influences of Electroplated Copper on Tensile Strain and Stress Tolerance of Critical Current in DyBCO-Coated Conductor , 2012, IEEE Transactions on Applied Superconductivity.

[24]  S. Wimbush,et al.  The interpretation of the field angle dependence of the critical current in defect-engineered superconductors , 2011, 1111.4252.

[25]  H. Adachi,et al.  Internal residual strain and critical current maximum of a surrounded Cu stabilized YBCO coated conductor , 2009 .

[26]  W. Prusseit,et al.  Tensile fracture behaviour of RE-123 coated conductors induced by discontinuous yielding in Hastelloy C-276 substrate , 2005 .

[27]  M. Murakami,et al.  Orientation imaging microscopy analysis of bulk, melt-textured YBCO superconductors , 2002 .

[28]  M. Koblischka,et al.  Residual Stress/Strain Analysis of Bulk YBCO Superconductors Using EBSD , 2022, IEEE Transactions on Applied Superconductivity.

[29]  H. Suo,et al.  Systematic research on the effect of both positive and negative mismatch dopants in double-doped YBCO superconducting films , 2021, Journal of the European Ceramic Society.

[30]  Shaotao Dai,et al.  Design, Manufacture, and Test of a 30 m 10 kV/2.5 kA Concentric HTS Cable Prototype for Urban Grid , 2021, IEEE Access.

[31]  Loren F. Goodrich,et al.  VAMAS intercomparison of critical current measurements on Nb3Sn superconductors: A summary report , 1994 .